1679359

https://www.phoenixcontact.com/us/products/1679359 Contact insert module - HC-M-02-MOD-BU - 1679359 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON contact insert module, female, 2-pos., axial screw connection Key Commercial Data Packing unit 1 pc Minimum order quantity 2 pc Weight per Piece (excluding packing) 20.0 g Custom tariff number 85366990 Country of origin Germany Technical data Electrical characteristics Note For HEAVYCON housing type B6 to B48, HC-M-MHR... hinged retaining frame required Rated voltage (III/3) 1000 V Rated current 40 A Rated surge voltage 8 kV Number of positions 2 Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C Mechanical characteristics Conductor cross section 2.5 mm² ... 8 mm² (The cross section specification refers to the geometric cross section of the cable used) Connection cross section AWG 12 ... 10 Stripping length of the individual wire 8 mm +1 (for 6 mm²) 5 mm +1 (For 2.5 mm² ... 4 mm²) 11 mm +1 (for 8 mm²) 04/07/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1679359 Contact insert module - HC-M-02-MOD-BU - 1679359 Technical data Mechanical characteristics Tightening torque 1.5 Nm (2.5 - 4 mm²) 2 Nm (6 -8 mm²) Wire diameter including insulation 6 mm (6 mm²) 10.5 mm (8 mm²) 4 mm (2.5 mm² ... 4 mm²) Hexagonal socket WAF 2 Insertion/withdrawal cycles ≥ 500 General Series HC-M-02 Number of module slots 1 Connection method Axial screw connection Connection in acc. with standard IEC / EN Flammability rating according to UL 94 V0 Degree of pollution 3 Overvoltage category III Assembly instructions - Connection of the wires using a 2 mm Allen wrench. - Housing height ≥ 52 mm. - Axial screw connection only for flexible wires. - Plug-in connections may only be operated only when there is no load/ voltage. Connection Note regarding axial connection technology: Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used. Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use. The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use. Connection Before starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. Material data Contact material Copper alloy Contact surface material Ag Contact carrier material PC 04/07/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1679359 Contact insert module - HC-M-02-MOD-BU - 1679359 Technical data Standards and Regulations Connection in acc. with standard IEC / EN CUL Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27140816 eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440207 ETIM ETIM 2.0 EC000438 ETIM 3.0 EC000438 ETIM 4.0 EC000438 ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals 04/07/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1679359 Contact insert module - HC-M-02-MOD-BU - 1679359 Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 8 Nominal current IN 40 A Nominal voltage UN 600 V cUL Recognized      mm²/AWG/kcmil 8 Nominal current IN 40 A Nominal voltage UN 600 V EAC  cULus Recognized  Drawings Schematic diagram Diagram 1 2 Operating current [A] 70 60 50 40 30 20 1 10 1 = 6 mm 0 20 2 40 60 80 100 120 Ambient temperature [°C] Connector pin assignment Derating diagram (6 modules in HC-B 24 housing) 04/07/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1679359 Contact insert module - HC-M-02-MOD-BU - 1679359 Dimensional drawing 14,6 40,6 34,2 Schematic diagram Axial connection (2 mm Allen key) Female insert Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/07/2016   Page 5 / 5