1679427

https://www.phoenixcontact.com/us/products/1679427 Contact insert - HC-K 4/0-EBUS - 1679427 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON socket insert, K4/0 series, 4-pos., screw connection without wire protection   Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 116.1 g Custom tariff number 85366990 Country of origin Romania Technical data General Note For HEAVYCON-ADVANCE housings of B16 type and HEAVYCON housings of B16 and B32 types Connection method Screw connection (power contacts) Tightening torque 3 Nm (4.0 mm² ... 16 mm²) 2 Nm (2.5 mm²) 1.2 Nm (1.5 mm²) Screwdriver blade 0.8 x 4.5 mm (power contacts) 0.5 x 3.5 mm (control contacts) Pollution degree 3 Overvoltage category III Number of positions 4+PE No. of power contacts 4 Insertion/withdrawal cycles ≥ 500 Type B16 Conductor cross section 1.5 mm² ... 16 mm² Connection cross section AWG 16 ... 6 12/27/2015   Page 1 / 4 https://www.phoenixcontact.com/us/products/1679427 Contact insert - HC-K 4/0-EBUS - 1679427 Technical data General Stripping length of the individual wire 14 mm Assembly instructions Plug-in connections may only be operated only when there is no load/ voltage. Connection Use wire end protection (screw connections do not have wire protection) Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C Material data Flammability rating according to UL 94 V0 Contact material Cu alloy Material of contact surface, power contact Ag Contact carrier material PC Electrical characteristics Rated voltage (III/3) 830 V (power contacts) Rated surge voltage 8 kV (power contacts) Rated current 80 A (power contacts) Standards and Regulations Connection in acc. with standard CSA Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27140816 eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440205 eCl@ss 9.0 27440205 ETIM ETIM 2.0 EC000438 ETIM 3.0 EC000438 ETIM 4.0 EC000438 ETIM 5.0 EC000438 12/27/2015   Page 2 / 4 https://www.phoenixcontact.com/us/products/1679427 Contact insert - HC-K 4/0-EBUS - 1679427 Classifications UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals CSA / UL Recognized / EAC / EAC / GL Ex Approvals Approvals submitted Approval details CSA      mm²/AWG/kcmil 5 Nominal current IN 80 A Nominal voltage UN 600 V UL Recognized      mm²/AWG/kcmil 8-4 Nominal current IN 63 A Nominal voltage UN 600 V 12/27/2015   Page 3 / 4 https://www.phoenixcontact.com/us/products/1679427 Contact insert - HC-K 4/0-EBUS - 1679427 Approvals EAC  EAC  GL  Drawings Schematic diagram Dimensional drawing 77,5 1 Ø3,3 36 2 14 27 3 4 5 Connector pin assignment, connection side 68,5 Mounting cutout when used without housing Diagram Dimensional drawing 80 84,5 34 77,5 27 2 60 40 44,2 Operating current [A] 100 1 20 1 = 10 mm2 2 = 16 mm² 0 20 40 60 80 100 120 Ambient temperature [°C] Female insert Derating diagram Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/27/2015   Page 4 / 4