1679469

https://www.phoenixcontact.com/us/products/1679469 Contact insert - HC-D 15-ESTC-R - 1679469 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) HEAVYCON male insert, D15 series, 15-pos., crimp connection, rolled contacts The illustration shows version HC-D 15-ESTC Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 34.8 GRM Custom tariff number 85366990 Country of origin Czech Republic Technical data General Note For HC-D15 housing, crimp contacts CK1,6-ER (crimp contacts not included in scope of supply) Connection method Crimp connection Pollution degree 3 Surge voltage category III Constructional and testing regulations DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60664-1, DIN IEC 60512 IEC 60352 Number of positions 15+PE Insertion/withdrawal cycles ≥ 500 Design D15 Connection in acc. with standard IEC / EN Conductor cross section 0.14 mm² ... 1.5 mm² 2/4/14   Page 1 / 6 https://www.phoenixcontact.com/us/products/1679469 Contact insert - HC-D 15-ESTC-R - 1679469 Technical data General Connection cross section AWG 26 ... 16 Stripping length of the individual wire 3 mm +0,5 (0.14 mm² ... 0.5 mm²) 3.5 mm +1 (0.5 mm² ... 1.5 mm²) Assembly instructions - Use of HC-CST (1676857) coding pins and HC-CBU (1676860) coding sockets has been prescribed. Connection Connectors may be plugged in only when there is no load/voltage. Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C (including heating up of contacts) Material data Inflammability class according to UL 94 V0 Contact material Copper alloy Contact surface material Ag (alternatively Au) Contact carrier material PC Electrical characteristics Rated voltage (III/3) 250 V Rated surge voltage 4 kV Rated current 10 A Classifications eCl@ss eCl@ss 4.0 27140816 eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440209 ETIM ETIM 2.0 EC000438 ETIM 3.0 EC000438 ETIM 4.0 EC000438 ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 30211923 2/4/14   Page 2 / 6 https://www.phoenixcontact.com/us/products/1679469 Contact insert - HC-D 15-ESTC-R - 1679469 Classifications UNSPSC UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals CSA / UL Recognized / GOST Ex Approvals Approvals submitted Approval details CSA      Nominal current IN 10 A Nominal voltage UN 600 V UL Recognized      Nominal current IN 10 A Nominal voltage UN 600 V GOST  2/4/14   Page 3 / 6 https://www.phoenixcontact.com/us/products/1679469 Contact insert - HC-D 15-ESTC-R - 1679469 Accessories Accessories Coding element Coding element - HC-CST - 1676857 Coding peg for coding up to 16 connectors     Coding element - HC-CBU - 1676860 Coding socket for coding up to 16 connectors     Coding bolt - HC-CB - 1772722 Coding pin, prevents mismating of up to six connectors with an identical number of positions     Crimp contact Crimp contact - CK1,6-ER-0,50ST AG - 1884092 Rolled 1.6 crimp contact, individual male contact, core diameter 0.5 mm²     2/4/14   Page 4 / 6 https://www.phoenixcontact.com/us/products/1679469 Contact insert - HC-D 15-ESTC-R - 1679469 Accessories Crimp contact - CK1,6-ER-1,50ST AG - 1884089 Rolled male contact, single contacts, silver-plated, 0.5 mm² ... 1.5 mm²     Crimp contact - CK1,6-ER-2,50ST AG - 1884102 Rolled male contact, single contacts, silver-plated, 1.5 mm² ... 2.5 mm²     Mounting material Screw - HC-A-PES - 1584868 PE screw for contact inserts of A series     Plug assembly frame Connector assembly frame - HC-SMR-D15 - 1604010 HEAVYCON connector assembly frame, for contact inserts of type D15     Drawings 2/4/14   Page 5 / 6 https://www.phoenixcontact.com/us/products/1679469 Contact insert - HC-D 15-ESTC-R - 1679469 Schematic diagram Diagram 1 2 3 4 5 Operating current [A] 10 C B A A B C 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 = male insert 2 = female insert D15 D7/D8 D7/D8 D40 8 D25 6 D64 D40 D64 4 2 0 D40 D64 2 1 = 0,5 mm 2 2 = 1,5 mm 0 2 1 20 40 60 80 100 120 0 20 40 60 80 100 120 Ambient temperature [°C] Dimensioned drawing Dimensioned drawing 56 22,7 49,5 16 55,5 15 Male insert Ø3,4 24 10 16 34 43,5 49,5 Panel cutout © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 2/4/14   Page 6 / 6