1681114

https://www.phoenixcontact.com/us/products/1681114 Connector - SACC-M12FS-4CON-PG7 - 1681114 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, 4-position, Socket straight M12, A-coded, Screw connection, Knurl material: Plastic, Cable gland Pg7, External cable diameter 4 mm ... 6 mm Product Features  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Screw connection: proven connection technology for a large selection of different conductors   Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 16.3 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions External cable diameter 4 mm ... 6 mm Stripping length of the sheath 20 mm Stripping length of the individual wire 5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Rated current at 40°C 4A Rated voltage 250 V Number of positions 4 Insulation resistance ≥ 100 MΩ 12/22/2015   Page 1 / 5 https://www.phoenixcontact.com/us/products/1681114 Connector - SACC-M12FS-4CON-PG7 - 1681114 Technical data General Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Pollution degree 3 Connection method Screw connection Conductor cross section 0.25 mm² ... 0.75 mm² Conductor cross section AWG 24 ... 18 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 0.2 Nm (Screw terminal blocks) 0.8 Nm ... 1 Nm (Pressure screw with sleeve housing) Tightening torque Screw plug insert with sleeve housing as far it will go Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 HB Contact material CuZn Contact surface material CuSnZn Contact carrier material PA 66 Material of grip body PBT Material, knurls Plastic Sealing material NBR Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Connection in acc. with standard CUL Flammability rating according to UL 94 HB Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27260701 eCl@ss 5.1 27260701 eCl@ss 6.0 27279221 12/22/2015   Page 2 / 5 https://www.phoenixcontact.com/us/products/1681114 Connector - SACC-M12FS-4CON-PG7 - 1681114 Classifications eCl@ss eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 ETIM ETIM 2.0 EC001121 ETIM 3.0 EC002062 ETIM 4.0 EC002062 ETIM 5.0 EC002062 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized      Nominal current IN 4A Nominal voltage UN 250 V 12/22/2015   Page 3 / 5 https://www.phoenixcontact.com/us/products/1681114 Connector - SACC-M12FS-4CON-PG7 - 1681114 Approvals cUL Recognized      Nominal current IN 4A Nominal voltage UN 250 V EAC  EAC  cULus Recognized  Drawings Schematic diagram 1 Schematic diagram 3 4 2 1 5 2 4 3 Cable connection side M12 (screw connection) Pin assignment M12 socket, 4-pos., A-coded, view female side Dimensional drawing Schematic diagram Angular housing Female insert with threaded ring 54 Ø20 Gasket Clamping cage Insulating sleeve Pressure screw M12 x 1 socket, straight Threaded sleeve Male/Female M12 12/22/2015   Page 4 / 5 https://www.phoenixcontact.com/us/products/1681114 Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/22/2015   Page 5 / 5