1694237

https://www.phoenixcontact.com/gb/products/1694237 Panel feed-through - SACC-DSIV-M12FS-5CON-L180 - 1694237 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type socket, 5-pos., M12, A-coded, rear/screw mounting with M12 thread, with polarity protection, with straight solder connection Why buy this product ■ Standard pin assignments and codings for signal transmission with a uniform design-in design Key Commercial Data Packing unit 10 STK Minimum order quantity 10 STK GTIN Weight per Piece (excluding packing) 14.7 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 60 V Rated surge voltage 1.5 kV 08/06/2016   Page 1 / 4 https://www.phoenixcontact.com/gb/products/1694237 Panel feed-through - SACC-DSIV-M12FS-5CON-L180 - 1694237 Technical data General Number of positions 5 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting M12 x 1 With locking nut Material Flammability rating according to UL 94 HB Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Nickel-plated brass Sealing material NBR Cable Standards/specifications M12 connector IEC 61076-2-101 Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 HB Drawings Schematic diagram 3 Drilling diagram Ø5 4 Ø1,2 Ø2,8 1 6,5 2 4 5° 5 Pin assignment M12 socket, 5-pos., A-coded, socket side view +0,10 Ø2,45 -0,05 15 M12 flush-type connector 08/06/2016   Page 2 / 4 https://www.phoenixcontact.com/gb/products/1694237 Panel feed-through - SACC-DSIV-M12FS-5CON-L180 - 1694237 Dimensional drawing Dimensional drawing 27,7 2mm 19,5 3mm Ø12,2 +0,1 SW 15 14 SW14 10 16 2 min. 2 max. 3 M12 flush-type connector Panel cutout Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals EAC / EAC Ex Approvals 08/06/2016   Page 3 / 4 https://www.phoenixcontact.com/gb/products/1694237 Panel feed-through - SACC-DSIV-M12FS-5CON-L180 - 1694237 Approvals Approvals submitted Approval details EAC  EAC  Accessories Accessories Protective cap Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 SH - 1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 FB - 1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/06/2016   Page 4 / 4