1700040

https://www.phoenixcontact.com/us/products/1700040 PCB terminal block - FRONT 2,5-H/SA10 - 1700040 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, Nominal current: 24 A, Nom. voltage: 400 V, Pitch: 5 mm, Number of positions: 1, Connection method: Front screw connection, Mounting: Wave soldering, Conductor/PCB connection direction: 0 °, Color: green, The article can be aligned to create different nos. of positions! Product Features ■ ■ ■ ■ ■ ■ Well-known connection principle allows worldwide use Low temperature rise, thanks to maximum contact force Allows connection of two conductors Operation and conductor connection from one direction enable integration into front of device Two solder pins reduce the mechanical strain on the soldering spots The latch on the side enables various numbers of positions to be combined Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN Weight per Piece (excluding packing) 3.6 g Custom tariff number 85369010 Country of origin Germany Technical data Dimensions Length 18.5 mm Pitch 5.00 mm Constructional height 19 mm Length of the solder pin 3.5 mm 04/19/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1700040 PCB terminal block - FRONT 2,5-H/SA10 - 1700040 Technical data Dimensions Pin dimensions 0,8 x 0,8 mm Pin spacing 10 mm Hole diameter 1.2 mm General Range of articles FRONT 2,5-H/SA10 Insulating material group I Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/3) 250 V Rated voltage (III/2) 400 V Rated voltage (II/2) 630 V Connection in acc. with standard EN-VDE Nominal current IN 24 A Nominal cross section 2.5 mm² Maximum load current 17.5 A Insulating material PA Solder pin surface Sn Flammability rating according to UL 94 V0 Internal cylindrical gage A3 Stripping length 9 mm Number of positions 1 Screw thread M2,5 Tightening torque, min 0.4 Nm Tightening torque max 0.5 Nm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 04/19/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1700040 PCB terminal block - FRONT 2,5-H/SA10 - 1700040 Technical data Connection data 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 0.75 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 0.75 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 0.34 mm² Standards and Regulations Connection in acc. with standard EN-VDE CSA Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141109 eCl@ss 4.1 27141109 eCl@ss 5.0 27141190 eCl@ss 5.1 27141190 eCl@ss 6.0 27261101 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 04/19/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1700040 PCB terminal block - FRONT 2,5-H/SA10 - 1700040 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / GL / RS / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details CSA    B D mm²/AWG/kcmil 24-12 24-12 Nominal current IN 10 A 10 A Nominal voltage UN 300 V 300 V UL Recognized    B C D mm²/AWG/kcmil 30-12 30-12 30-12 Nominal current IN 20 A 17 A 20 A Nominal voltage UN 300 V 300 V 300 V   B C D mm²/AWG/kcmil 30-12 30-12 30-12 Nominal current IN 10 A 17 A 10 A Nominal voltage UN 250 V 300 V 300 V cUL Recognized  GL  04/19/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1700040 PCB terminal block - FRONT 2,5-H/SA10 - 1700040 Approvals RS  EAC  EAC  cULus Recognized  Drawings Drilling diagram 10 1,2 Current strength [A] 5 2,75 2,8 Diagram 40 32 24 16 ! 8 ! = 2,5 mm2 0 0 20 40 60 80 100 Ambient temperature [°C] Dimensional drawing 5 5 18,5 19,5 10 2,75 2,8 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/19/2016   Page 5 / 5