1701465

PCB header - MDSTBA 2,5/ 6-G GY 1701465 https://www.phoenixcontact.com/us/products/1701465 Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. PCB headers, nominal cross section: 2.5 mm2, color: gray, nominal current: 10 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male connector, number of potentials: 12, number of rows: 2, number of positions: 6, number of connections: 12, product range: MDSTBA 2,5/..-G, pitch: 5 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.2 mm, number of solder pins per potential: 1, plug-in system: COMBICON MSTB 2,5, Pin connector pattern alignment: Standard, locking: without, mounting: without, type of packaging: packed in cardboard, The article can be aligned to create different nos. of positions! In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible! Your advantages • Maximum flexibility when it comes to device design – one header for connectors with different connection technologies • Easy PCB replacement thanks to plug-in modules • Well-known mounting principle allows worldwide use • Conductor connection on several levels enables higher contact density Commercial Data Item number 1701465 Packing unit 1 pc Minimum order quantity 50 pc Note Made to Order (non-returnable) Sales Key A01 Product Key AACSCC GTIN 4046356536257 Weight per Piece (including packing) 10.32 g Weight per Piece (excluding packing) 10.32 g Customs tariff number 85366930 Country of origin DE Dec 22, 2022, 2:56 PM Page 1 (8) PCB header - MDSTBA 2,5/ 6-G GY 1701465 https://www.phoenixcontact.com/us/products/1701465 Technical Data Product properties Type Header can be aligned Product line COMBICON Connectors M Product type PCB headers Number of positions 6 Pitch 5 mm Number of connections 12 Number of rows 2 Mounting flange without Number of potentials 12 Pin layout Linear pinning Solder pins per potential 1 Electrical properties Nominal current IN 10 A Nominal voltage UN 320 V Degree of pollution 3 Rated voltage (III/3) 250 V Rated surge voltage (III/3) 4 kV Rated voltage (III/2) 320 V Rated surge voltage (III/2) 4 kV Mounting Mounting type Wave soldering Pin layout Linear pinning Material specifications Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 Contact material Cu alloy Surface characteristics Tin-plated Metal surface contact area (top layer) Tin (5 - 7 µm Sn) Metal surface contact area (middle layer) Nickel (2 - 3 µm Ni) Metal surface soldering area (top layer) Tin (5 - 7 µm Sn) Metal surface soldering area (middle layer) Nickel (2 - 3 µm Ni) Material data - housing Insulating material PBT Insulating material group IIIa CTI according to IEC 60112 225 Flammability rating according to UL 94 V0 Dec 22, 2022, 2:56 PM Page 2 (8) PCB header - MDSTBA 2,5/ 6-G GY 1701465 https://www.phoenixcontact.com/us/products/1701465 Notes Notes on operation In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. Dimensions Dimensional drawing Pitch 5 mm Width [w] 34.5 mm Height [h] 27.2 mm Length [l] 22.1 mm Installed height 24 mm Solder pin length [P] 3.2 mm Electrical tests Air clearances and creepage distances | Specification IEC 60664-1:2007-04 Insulating material group IIIa Comparative tracking index (IEC 60112) CTI 225 Rated insulation voltage (III/3) 250 V Rated surge voltage (III/3) 4 kV minimum clearance value - non-homogenous field (III/3) 3 mm minimum creepage distance (III/3) 4 mm Rated insulation voltage (III/2) 320 V Rated surge voltage (III/2) 4 kV minimum clearance value - non-homogenous field (III/2) 3 mm minimum creepage distance (III/2) 4 mm Rated insulation voltage (II/2) 400 V Rated surge voltage (II/2) 4 kV minimum clearance value - non-homogenous field (II/2) 3 mm minimum creepage distance (II/2) 4 mm Environmental and real-life conditions Ambient conditions Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve) Ambient temperature (storage/transport) -40 °C ... 70 °C Relative humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 100 °C Dec 22, 2022, 2:56 PM Page 3 (8) PCB header - MDSTBA 2,5/ 6-G GY 1701465 https://www.phoenixcontact.com/us/products/1701465 Packaging specifications Type of packaging packed in cardboard Dec 22, 2022, 2:56 PM Page 4 (8) PCB header - MDSTBA 2,5/ 6-G GY 1701465 https://www.phoenixcontact.com/us/products/1701465 Classifications ECLASS ECLASS-9.0 27440402 ECLASS-10.0.1 27440402 ECLASS-11.0 27460201 ETIM ETIM 7.0 EC002637 UNSPSC UNSPSC 21.0 39121409 Dec 22, 2022, 2:56 PM Page 5 (8) PCB header - MDSTBA 2,5/ 6-G GY 1701465 https://www.phoenixcontact.com/us/products/1701465 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Dec 22, 2022, 2:56 PM Page 6 (8) PCB header - MDSTBA 2,5/ 6-G GY 1701465 https://www.phoenixcontact.com/us/products/1701465 Accessories Accessories Accessories - MSTB-BL - 1755477 https://www.phoenixcontact.com/us/products/1755477 Keying cap, for forming sections, plugs onto header pin, green insulating material Coding section Coding section - CR-MSTB - 1734401 https://www.phoenixcontact.com/us/products/1734401 Coding section, inserted into the recess in the header or the inverted plug, red insulating material Dec 22, 2022, 2:56 PM Page 7 (8) PCB header - MDSTBA 2,5/ 6-G GY 1701465 https://www.phoenixcontact.com/us/products/1701465 Marker card Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 https://www.phoenixcontact.com/us/products/0804183 Marker card, white, labeled, horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm Phoenix Contact 2022 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Dec 22, 2022, 2:56 PM Page 8 (8)