https://www.phoenixcontact.com/us/products/1710056
PCB terminal block - MKDSV 5/ 2-6,35 - 1710056
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PCB terminal block, nominal current: 32 A, pitch: 6.35 mm, number of positions: 2, connection method: Screw
connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green.
The article can be aligned to create different nos. of positions!
The figure shows the 5-pos. version
Your advantages
Well-known connection principle allows worldwide use
Low temperature rise, thanks to maximum contact force
Allows connection of two conductors
The latching on the side enables various numbers of positions to be combined
Anti-rotation pins support positioning on the PCB
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4017918241537
Weight per Piece (excluding packing)
5.760 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
Item properties
Brief article description
PCB terminal block
Range of articles
MKDSV 5
Pitch
6.35 mm
08/29/2019 Page 1 / 6
https://www.phoenixcontact.com/us/products/1710056
PCB terminal block - MKDSV 5/ 2-6,35 - 1710056
Technical data
Item properties
Number of positions
2
Connection method
Screw connection with tension sleeve
Screw thread
M3
Mounting type
Wave soldering
Pin layout
Linear pinning
Number of levels
1
Number of connections
2
Number of potentials
2
Electrical parameters
Rated current
32 A
Connection capacity
Conductor cross section solid
0.2 mm² ... 6 mm²
Conductor cross section flexible
0.2 mm² ... 4 mm²
Conductor cross section AWG / kcmil
24 ... 10
Conductor cross section flexible, with ferrule without plastic sleeve
0.25 mm² ... 4 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 4 mm²
2 conductors with same cross section, solid
0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible
0.2 mm² ... 1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve
0.25 mm² ... 0.75 mm²
2 conductors with same cross section, stranded, with TWIN ferrules with
plastic sleeve
0.5 mm² ... 2.5 mm²
Stripping length
8 mm
Torque
0.5 Nm
Material data - contact
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/
JEDEC JESD 201
Contact material
Cu alloy
Surface characteristics
hot-dip tin-plated
Metal surface terminal point (top layer)
Tin (4 - 8 µm Sn)
Metal surface soldering area (top layer)
Tin (4 - 8 µm Sn)
Material data - housing
Insulating material
PA
Insulating material group
I
CTI according to IEC 60112
600
Flammability rating according to UL 94
V0
08/29/2019 Page 2 / 6
https://www.phoenixcontact.com/us/products/1710056
PCB terminal block - MKDSV 5/ 2-6,35 - 1710056
Technical data
Material data - housing
Glow wire flammability index GWFI according to EN 60695-2-12
850
Glow wire ignition temperature GWIT according to EN 60695-2-13
775
Temperature for the ball pressure test according to EN 60695-10-2
125 °C
Dimensions for the product
Length [ l ]
12.5 mm
Width [ w ]
12.7 mm
Height [ h ]
26.6 mm
Pitch
6.35 mm
Height (without solder pin)
21.5 mm
Solder pin [P]
5.1 mm
Pin dimensions
0.9 x 0.9 mm
Dimension a
6.35 mm
Dimensions for PCB design
Hole diameter
1.3 mm
Packaging information
Type of packaging
packed in cardboard
Pieces per package
50
Denomination packing units
Pcs.
General product information
Type of note
Note on application
Note
For safe conductor connection, always adhere to a defined tightening
torque. Particularly in the case of PCB terminal blocks with two or
three positions, the individual solder pin for each contact point cannot
compensate for this. That is why the terminal blocks must be supported
during conductor connection (held with one hand, support on the housing).
Processing notes
Process
Wave soldering
Specification
Following IEC 61760-1:2006-04
Following IEC 60068-2-54:2006-04
Electrical tests
Rated current
32 A
Conductor cross section
4 mm²
Air clearances and creepage distances
Rated insulation voltage (III/3)
500 V
Current carrying capacity / derating curves
08/29/2019 Page 3 / 6
https://www.phoenixcontact.com/us/products/1710056
PCB terminal block - MKDSV 5/ 2-6,35 - 1710056
Technical data
Standards and Regulations
Connection in acc. with standard
EN-VDE
CUL
Flammability rating according to UL 94
V0
Environmental Product Compliance
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Classifications
eCl@ss
eCl@ss 4.1
27141100
eCl@ss 5.1
27261100
eCl@ss 6.0
27261100
eCl@ss 7.0
27440401
eCl@ss 8.0
27440401
eCl@ss 9.0
27440401
ETIM
ETIM 3.0
EC001121
ETIM 4.0
EC002643
ETIM 5.0
EC002643
ETIM 6.0
EC002643
ETIM 7.0
EC002643
UNSPSC
UNSPSC 6.01
30211801
UNSPSC 7.0901
39121432
UNSPSC 11
39121432
UNSPSC 12.01
39121432
UNSPSC 13.2
39121432
Approvals
Approvals
08/29/2019 Page 4 / 6
https://www.phoenixcontact.com/us/products/1710056
PCB terminal block - MKDSV 5/ 2-6,35 - 1710056
Approvals
Approvals
EAC / cULus Recognized
Ex Approvals
Approval details
EAC
B.01742
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
E60425-19770427
B
D
Nominal voltage UN
300 V
300 V
Nominal current IN
30 A
10 A
mm²/AWG/kcmil
30-10
30-10
Accessories
Accessories
Labeled terminal marker
Marker card - SK 6,2/3,8:FORTL.ZAHLEN - 0804374
Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting
type: adhesive, for terminal block width: 6.2 mm, lettering field size: 6.2 x 3.8 mm
Marker card - SK 3,8 REEL P6,2 WH CUS - 0825126
Marker card, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, for
terminal block width: 6.2 mm, lettering field size: continuous x 3.8 mm
08/29/2019 Page 5 / 6
https://www.phoenixcontact.com/us/products/1710056
PCB terminal block - MKDSV 5/ 2-6,35 - 1710056
Accessories
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Terminal marking
Marker strip - SK 5,0 WH:REEL - 0805221
Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL,
THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for
terminal block width: 5 mm, lettering field size: continuous x 5 mm
Marker strip - SK 3,8 WH:REEL - 0805218
Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL,
THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for
terminal block width: 90000 mm, lettering field size: continuous x 3.8 mm
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
08/29/2019 Page 6 / 6
