1712025

https://www.phoenixcontact.com/us/products/1712025 PCB terminal block - MKDSF 3/ 2 - 1712025 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, nominal current: 24 A, pitch: 5 mm, number of positions: 2, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 90 °, color: green. The article can be aligned to create different nos. of positions! Your advantages  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Integrated protective guide prevents incorrect insertion of the conductor underneath the tension sleeve  The latching on the side enables various numbers of positions to be combined Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918023768 Weight per Piece (excluding packing) 4.240 g Custom tariff number 85369010 Country of origin Germany Technical data Item properties Brief article description PCB terminal block Range of articles MKDSF 3 Pitch 5 mm Number of positions 2 09/13/2019   Page 1 / 9 https://www.phoenixcontact.com/us/products/1712025 PCB terminal block - MKDSF 3/ 2 - 1712025 Technical data Item properties Connection method Screw connection with tension sleeve Drive form screw head Slotted (L) Screw thread M3 Mounting type Wave soldering Pin layout Linear pinning Number of levels 1 Number of connections 2 Number of potentials 2 Electrical parameters Rated current 24 A Connection capacity Conductor cross section solid 0.2 mm² ... 4 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG / kcmil 24 ... 12 Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 2.5 mm² 2 conductors with same cross section, solid 0.2 mm² ... 1.5 mm² 2 conductors with same cross section, flexible 0.2 mm² ... 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve 0.25 mm² ... 0.75 mm² 2 conductors with same cross section, stranded, with TWIN ferrules with plastic sleeve 0.5 mm² ... 1.5 mm² Stripping length 8 mm Torque 0.5 Nm ... 0.6 Nm Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics Tin-plated Metal surface terminal point (top layer) Tin (5 - 7 µm Sn) Metal surface terminal point (middle layer) Nickel (2 - 3 µm Ni) Metal surface soldering area (top layer) Tin (5 - 7 µm Sn) Metal surface soldering area (middle layer) Nickel (2 - 3 µm Ni) Material data - housing Insulating material PA Insulating material group I 09/13/2019   Page 2 / 9 https://www.phoenixcontact.com/us/products/1712025 PCB terminal block - MKDSF 3/ 2 - 1712025 Technical data Material data - housing CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Dimensions for the product Length [ l ] 18 mm Width [ w ] 10 mm Height [ h ] 15.3 mm Pitch 5 mm Height (without solder pin) 11.2 mm Solder pin [P] 4.1 mm Pin dimensions 0.9 x 0.9 mm Dimension a 5 mm Dimensions for PCB design Hole diameter 1.3 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. General product information Type of note Note on application Note For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). Processing notes Process Wave soldering Specification Following IEC 61760-1:2006-04 Following IEC 60068-2-54:2006-04 Ambient conditions Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) 09/13/2019   Page 3 / 9 https://www.phoenixcontact.com/us/products/1712025 PCB terminal block - MKDSF 3/ 2 - 1712025 Technical data Termination and connection method Test for conductor damage and slackening IEC 60999-1:1990-05 Test passed Pull-out test Pull-out test IEC 60999-1:1990-05 Test passed Conductor cross section / conductor type / tensile force 0.2 mm² / solid / > 10 N 0.2 mm² / flexible / > 10 N 4 mm² / solid / > 60 N 2.5 mm² / flexible / > 50 N Electrical tests Rated current 24 A Conductor cross section 2.5 mm² Air clearances and creepage distances Specification IEC 60664-1:2007-04 Rated insulation voltage (III/3) 250 V Minimum clearance - inhomogeneous field (III/3) 3 mm Minimum clearance - inhomogeneous field (III/2) 3 mm Minimum clearance - inhomogeneous field (II/2) 3 mm Minimum creepage distance value (III/3) 3.2 mm Minimum creepage distance value (III/2) 2 mm Minimum creepage distance value (II/2) 3.2 mm Vibration test Specification IEC 60068-2-6:1982 + AMD 2:1985 Result Test passed Frequency 10 - 150 - 10 Hz Sweep speed 1 octave/min Amplitude 0.35 mm (10 - 60.1 Hz) Acceleration 5 g (60.1 - 150 Hz) Test duration per axis 2.5 h Standards and Regulations Connection in acc. with standard EN-VDE CSA Flammability rating according to UL 94 V0 Environmental Product Compliance Lead 7439-92-1 09/13/2019   Page 4 / 9 https://www.phoenixcontact.com/us/products/1712025 PCB terminal block - MKDSF 3/ 2 - 1712025 Technical data Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Drilling diagram 09/13/2019   Page 5 / 9 https://www.phoenixcontact.com/us/products/1712025 PCB terminal block - MKDSF 3/ 2 - 1712025 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27261100 eCl@ss 6.0 27261100 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 ETIM 6.0 EC002643 ETIM 7.0 EC002643 UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 09/13/2019   Page 6 / 9 https://www.phoenixcontact.com/us/products/1712025 PCB terminal block - MKDSF 3/ 2 - 1712025 Approvals Approvals Approvals CSA / CCA / SEV / EAC / cULus Recognized Ex Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/   B D Nominal voltage UN 300 V 300 V Nominal current IN 10 A 10 A mm²/AWG/kcmil 28-12 28-12 CCA     IK-3249  https://www.electrosuisse.ch/de/meta/shop/produktezertifikate.html  IK-4199     Nominal voltage UN 250 V mm²/AWG/kcmil 4 SEV       Nominal voltage UN 250 V Nominal current IN 32 A mm²/AWG/kcmil 4 EAC    13631    B.01742 09/13/2019   Page 7 / 9 https://www.phoenixcontact.com/us/products/1712025 PCB terminal block - MKDSF 3/ 2 - 1712025 Approvals cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B D Nominal voltage UN 250 V 300 V Nominal current IN 15 A 10 A mm²/AWG/kcmil 30-12 30-12  E60425-19870331 Accessories Accessories Bridge Insertion bridge - EBP 2- 5 - 1733169 Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 2     Labeled terminal marker Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     09/13/2019   Page 8 / 9 https://www.phoenixcontact.com/us/products/1712025 Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/13/2019   Page 9 / 9