https://www.phoenixcontact.com/us/products/1712041
PCB terminal block - MKDSF 3/ 4 - 1712041
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PCB terminal block, nominal current: 24 A, pitch: 5 mm, number of positions: 4, connection method: Screw
connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 90 °, color:
green. The article can be aligned to create different nos. of positions!
The figure shows a 2-position
version
Your advantages
Generously dimensioned wiring space, solid conductors up to 4 mm²
Well-known connection principle allows worldwide use
Low temperature rise, thanks to maximum contact force
Allows connection of two conductors
Integrated protective guide prevents incorrect insertion of the conductor underneath the tension sleeve
The latching on the side enables various numbers of positions to be combined
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4017918023782
Weight per Piece (excluding packing)
8.170 g
Custom tariff number
85369010
Country of origin
Germany
Technical data
Dimensions
Length [ l ]
18 mm
Pitch
5 mm
Dimension a
15 mm
09/10/2019 Page 1 / 8
https://www.phoenixcontact.com/us/products/1712041
PCB terminal block - MKDSF 3/ 4 - 1712041
Technical data
Dimensions
Width [ w ]
20 mm
Height
11.2 mm
Height [ h ]
15.3 mm
Solder pin [P]
4.1 mm
Hole diameter
1.3 mm
General
Range of articles
MKDSF 3
Insulating material group
I
Rated surge voltage (III/3)
4 kV
Rated surge voltage (III/2)
4 kV
Rated surge voltage (II/2)
4 kV
Rated voltage (III/3)
250 V
Rated voltage (III/2)
400 V
Rated voltage (II/2)
630 V
Connection in acc. with standard
EN-VDE
Nominal current IN
24 A
Nominal cross section
2.5 mm²
Maximum load current
32 A (with 4 mm² conductor cross section)
Insulating material
PA
Flammability rating according to UL 94
V0
Internal cylindrical gage
A3
Stripping length
8 mm
Number of positions
4
Screw thread
M3
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Conductor cross section AWG min.
24
09/10/2019 Page 2 / 8
https://www.phoenixcontact.com/us/products/1712041
PCB terminal block - MKDSF 3/ 4 - 1712041
Technical data
Connection data
Conductor cross section AWG max.
12
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
0.75 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
1.5 mm²
sleeve, max.
Standards and Regulations
Connection in acc. with standard
EN-VDE
CSA
Flammability rating according to UL 94
V0
Environmental Product Compliance
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
09/10/2019 Page 3 / 8
https://www.phoenixcontact.com/us/products/1712041
PCB terminal block - MKDSF 3/ 4 - 1712041
Drilling diagram
09/10/2019 Page 4 / 8
https://www.phoenixcontact.com/us/products/1712041
PCB terminal block - MKDSF 3/ 4 - 1712041
Dimensional drawing
Classifications
eCl@ss
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27261100
eCl@ss 6.0
27261100
eCl@ss 7.0
27440401
eCl@ss 8.0
27440401
eCl@ss 9.0
27440401
ETIM
ETIM 3.0
EC001121
ETIM 4.0
EC002643
ETIM 5.0
EC002643
ETIM 6.0
EC002643
ETIM 7.0
EC002643
UNSPSC
UNSPSC 6.01
30211801
UNSPSC 7.0901
39121432
UNSPSC 11
39121432
UNSPSC 12.01
39121432
UNSPSC 13.2
39121432
09/10/2019 Page 5 / 8
https://www.phoenixcontact.com/us/products/1712041
PCB terminal block - MKDSF 3/ 4 - 1712041
Approvals
Approvals
Approvals
CSA / CCA / SEV / EAC / cULus Recognized
Ex Approvals
Approval details
CSA
http://www.csagroup.org/services-industries/product-listing/
B
D
Nominal voltage UN
300 V
300 V
Nominal current IN
10 A
10 A
mm²/AWG/kcmil
28-12
28-12
CCA
IK-3249
https://www.electrosuisse.ch/de/meta/shop/produktezertifikate.html
IK-4199
Nominal voltage UN
250 V
mm²/AWG/kcmil
4
SEV
Nominal voltage UN
250 V
Nominal current IN
32 A
mm²/AWG/kcmil
4
EAC
13631
B.01742
09/10/2019 Page 6 / 8
https://www.phoenixcontact.com/us/products/1712041
PCB terminal block - MKDSF 3/ 4 - 1712041
Approvals
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
D
Nominal voltage UN
250 V
300 V
Nominal current IN
15 A
10 A
mm²/AWG/kcmil
30-12
30-12
E60425-19870331
Accessories
Accessories
Bridge
Insertion bridge - EBP 2- 5 - 1733169
Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 2
Insertion bridge - EBP 4- 5 - 1733185
Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 4
Labeled terminal marker
Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183
Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting
type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm
Screwdriver tools
09/10/2019 Page 7 / 8
https://www.phoenixcontact.com/us/products/1712041
PCB terminal block - MKDSF 3/ 4 - 1712041
Accessories
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
09/10/2019 Page 8 / 8
