1712417

https://www.phoenixcontact.com/us/products/1712417 Panel feed-through terminal block - VDFK 6 RD - 1712417 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Solder connection, number of positions: 1, load current: 41 A, cross section: 0.2 mm² - 10 mm², connection direction of the conductor to plug-in direction: 0 °, width: 10 mm, color: red The figure shows a 6-position version Your advantages  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force Key Commercial Data Packing unit 1 pc Minimum order quantity 500 pc GTIN GTIN 4055626298412 Weight per Piece (excluding packing) 7.600 g Custom tariff number 85369010 Country of origin Poland Technical data Item properties Brief article description Panel feed-through terminal block Range of articles VDFK 6 Number of positions 1 Electrical parameters Nominal current 41 A 05/03/2021   Page 1 / 6 https://www.phoenixcontact.com/us/products/1712417 Panel feed-through terminal block - VDFK 6 RD - 1712417 Technical data Electrical parameters Nom. voltage 500 V Rated voltage (III/3) 500 V Rated surge voltage (III/3) 6 kV Connection capacity, external Connection method Screw connection with tension sleeve Connection direction of the conductor to plug-in direction 0° Conductor cross section solid 0.2 mm² ... 10 mm² Conductor cross section flexible 0.2 mm² ... 6 mm² Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 6 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 6 mm² 2 conductors with same cross section, solid 0.2 mm² ... 4 mm² 2 conductors with same cross section, flexible 0.2 mm² ... 4 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 4 mm² Internal cylindrical gage A5 Stripping length 9 mm Torque 1.5 Nm ... 1.8 Nm Connection capacity, internal Connection method Solder connection Connection direction of the conductor to plug-in direction 0° Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics tin-plated Material data - housing Housing color red (3001) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C 05/03/2021   Page 2 / 6 https://www.phoenixcontact.com/us/products/1712417 Panel feed-through terminal block - VDFK 6 RD - 1712417 Technical data Dimensions for the product Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center Length [ l ] 30.2 mm Width [ w ] 10 mm Height [ h ] 31.5 mm Pitch 10 mm Packaging information Pieces per package 50 Denomination packing units Pcs. Electrical tests Rated current 41 A Conductor cross section 6 mm² Air clearances and creepage distances Clearances and creepage distances Internal part molded Application Internal part molded Minimum clearance - inhomogeneous field (III/3) 5.5 mm Standards and Regulations Flammability rating according to UL 94 V0 Safety note • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. • The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection. • To maintain the nominal voltage, cast the terminals on the inside.  There is no electrical contact to the housing. Make sure that protective grounding is provided for green/yellow color variants and articles marked with PE. Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” 05/03/2021   Page 3 / 6 https://www.phoenixcontact.com/us/products/1712417 Panel feed-through terminal block - VDFK 6 RD - 1712417 Classifications eCl@ss eCl@ss 10.0.1 27141134 eCl@ss 11.0 27141134 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141134 eCl@ss 9.0 27141134 ETIM ETIM 6.0 EC001283 ETIM 7.0 EC001283 Approvals Approvals Approvals KEMA-KEUR / IECEE CB Scheme / EAC / cULus Recognized / CSA Ex Approvals Approval details KEMA-KEUR    http://www.dekra-certification.com     Nominal voltage UN 500 V Nominal current IN 41 A mm²/AWG/kcmil 6 IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 500 V  2169260.01  NL-29947 05/03/2021   Page 4 / 6 https://www.phoenixcontact.com/us/products/1712417 Panel feed-through terminal block - VDFK 6 RD - 1712417 Approvals     Nominal current IN 41 A mm²/AWG/kcmil 6 EAC      B.01687 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-19770427   B C D Nominal voltage UN 300 V 150 V 300 V Nominal current IN 50 A 50 A 10 A mm²/AWG/kcmil 26-8 26-8 26-8 CSA    http://www.csagroup.org/services-industries/product-listing/   B C D Nominal voltage UN 300 V 150 V 300 V Nominal current IN 50 A 50 A 10 A mm²/AWG/kcmil 26-8 26-8 26-8  LR13631-70215335 Accessories Accessories Screwdriver tools Screwdriver - SZS 0,8X4,0 VDE - 1212508 Screwdriver, slot-headed, VDE insulated, size: 0.8 x 4.0 x 100 mm, 2-component grip, with non-slip grip     05/03/2021   Page 5 / 6 https://www.phoenixcontact.com/us/products/1712417 Panel feed-through terminal block - VDFK 6 RD - 1712417 Accessories Screw insert - SF-BIT-SL 0,8X4,0-50 - 1212571 Screw bit, bladed, E6.3-1/4" drive, size: 0.8 x 4.0 x 50 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173     Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com 05/03/2021   Page 6 / 6