1714333

https://www.phoenixcontact.com/us/products/1714333 Plug - GMSTB 2,5 HCV/ 8-ST-7,62 - 1714333 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB connector, nominal current: 16 A, rated voltage (III/2): 1000 V, nominal cross section: 2.5 mm², number of positions: 8, pitch: 7.62 mm, connection method: Screw connection with tension sleeve, color: green, contact surface: Tin The figure shows the 5-position version of the product Your advantages  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Integrated double steel spring provides additional safety in the event of temperature and power fluctuations  600 V UL approval in the smallest of dimensions Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356095624 Weight per Piece (excluding packing) 16.260 g Custom tariff number 85366990 Country of origin Germany Technical data Item properties Brief article description Printed-circuit board connector Plug-in system POWER COMBICON 2,5 Type of contact Female connector 08/21/2020   Page 1 / 10 https://www.phoenixcontact.com/us/products/1714333 Plug - GMSTB 2,5 HCV/ 8-ST-7,62 - 1714333 Technical data Item properties Range of articles GMSTB 2,5 HCV/..-ST Pitch 7.62 mm Number of positions 8 Connection method Screw connection with tension sleeve Drive form screw head Slotted (L) Screw thread M3 Locking without Number of levels 1 Number of connections 8 Number of potentials 8 Electrical parameters Nominal current 16 A Nom. voltage 1000 V Rated voltage 1000 V Rated voltage (III/2) 1000 V Rated voltage (II/2) 1000 V Rated surge voltage (III/3) 8 kV Rated surge voltage (III/2) 8 kV Rated surge voltage (II/2) 6 kV Connection capacity Connection method Screw connection with tension sleeve pluggable Yes Conductor cross section solid 0.2 mm² ... 2.5 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG / kcmil 24 ... 12 Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 2.5 mm² 2 conductors with same cross section, solid 0.2 mm² ... 1 mm² 2 conductors with same cross section, flexible 0.2 mm² ... 1.5 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm² ... 1 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 1 mm² Cylindrical gauge a x b / diameter 2.8 mm x 2.4 mm / 2.5 mm Stripping length 8 mm Torque 0.5 Nm ... 0.6 Nm Material data - contact 08/21/2020   Page 2 / 10 https://www.phoenixcontact.com/us/products/1714333 Plug - GMSTB 2,5 HCV/ 8-ST-7,62 - 1714333 Technical data Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics hot-dip tin-plated Metal surface terminal point (top layer) Tin (2 - 4 µm Sn) Metal surface contact area (top layer) Tin (2 - 4 µm Sn) Material data - housing Housing color green (6021) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Dimensions for the product Length [ l ] 21 mm Width [ w ] 60.74 mm Height [ h ] 17.5 mm Pitch 7.62 mm Height (without solder pin) 17.5 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. General product information Note In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. Ambient conditions Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve) Termination and connection method Test for conductor damage and slackening IEC 60999-1:1999-11 Test passed 08/21/2020   Page 3 / 10 https://www.phoenixcontact.com/us/products/1714333 Plug - GMSTB 2,5 HCV/ 8-ST-7,62 - 1714333 Technical data Pull-out test Pull-out test IEC 60999-1:1999-11 Test passed Conductor cross section / conductor type / tensile force 0.2 mm² / solid / > 10 N 0.2 mm² / flexible / > 10 N 2.5 mm² / solid / > 50 N 2.5 mm² / flexible / > 50 N Mechanical tests according to standard Test specification IEC 61984 Visual inspection IEC 60512-1-1:2002-02 Dimension check IEC 60512-1-2:2002-02 Resistance of inscriptions IEC 60068-2-70:1995-12 Insertion and withdrawal force IEC 60512-13-2:2006-02 No. of cycles 50 Insertion strength per pos. approx. 7N Withdraw strength per pos. approx. 5N Polarization and coding IEC 60512-13-5:2006-02 Contact holder in insert IEC 60512-15-1:2008-05 Test force per pos. 28 N Air clearances and creepage distances Clearances and creepage distances IEC 60664-1:2007-04 Specification IEC 60664-1:2007-04 Minimum clearance - inhomogeneous field (III/3) 8 mm Minimum clearance - inhomogeneous field (III/2) 8 mm Minimum clearance - inhomogeneous field (II/2) 5.5 mm Minimum creepage distance value (III/3) 12.5 mm Minimum creepage distance value (III/2) 5 mm Minimum creepage distance value (II/2) 5 mm Current carrying capacity / derating curves Caption Type: GMSTB 2,5 HCV/...-ST-7,62 with GMSTBA 2,5 HC/...-G-7,62 Specification IEC 61984:2008-10 Reduction factor 0.8 Note Representation based on IEC 60512-5-2:2002-02 For number of positions, see diagram Mechanical tests (A) Test specification IEC 61984 08/21/2020   Page 4 / 10 https://www.phoenixcontact.com/us/products/1714333 Plug - GMSTB 2,5 HCV/ 8-ST-7,62 - 1714333 Technical data Mechanical tests (A) Insertion strength per pos. approx. 7N Withdraw strength per pos. approx. 5N Polarization when inserted requirement >20 N Test passed Contact holder in insert requirements >20 N Test passed Durability tests (B) Specification IEC 60512-9-1:2010-03 Contact resistance R1 0.6 mΩ Insertion/withdrawal cycles 50 Contact resistance R2 0.8 mΩ Impulse withstand voltage at sea level 9.8 kV Power-frequency withstand voltage 4.26 kV Insulation resistance, neighboring positions > 9 TΩ Thermal tests (C) Specification IEC 60512-5-1:2002-02 Number of positions 12 Conductor cross section 2.5 mm² Test current 16 A DC Upper limiting temperature requirements