1714955

https://www.phoenixcontact.com/gb/products/1714955 PCB terminal block - MKDS 5/ 2-6,35 - 1714955 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, Nominal current: 32 A, Nom. voltage: 630 V, Pitch: 6.35 mm, Number of positions: 2, Connection method: Screw connection with tension sleeve, Mounting: Wave soldering, Conductor/PCB connection direction: 0 °, Color: green, The article can be aligned to create different nos. of positions! Why buy this product  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  The latching on the side enables various numbers of positions to be combined Key Commercial Data Packing unit 50 STK Minimum order quantity 50 STK GTIN GTIN 4017918024093 Weight per Piece (excluding packing) 5.150 g Custom tariff number 85369010 Country of origin Germany Technical data Dimensions Length 12.5 mm Pitch 6.35 mm Dimension a 6.35 mm Width 12.7 mm Constructional height 21.5 mm Height 26.6 mm Length of the solder pin 5.1 mm Pin dimensions 0,9 x 0,9 mm 12/22/2016   Page 1 / 7 https://www.phoenixcontact.com/gb/products/1714955 PCB terminal block - MKDS 5/ 2-6,35 - 1714955 Technical data Dimensions Hole diameter 1.3 mm General Range of articles MKDS 5 Insulating material group I Rated surge voltage (III/3) 6 kV Rated surge voltage (III/2) 6 kV Rated surge voltage (II/2) 6 kV Rated voltage (III/3) 500 V Rated voltage (III/2) 630 V Rated voltage (II/2) 1000 V Connection in acc. with standard EN-VDE Nominal current IN 32 A Nominal cross section 4 mm² Maximum load current 32 A Insulating material PA Solder pin surface Sn Flammability rating according to UL 94 V0 Internal cylindrical gage A4 Stripping length 8 mm Number of positions 2 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 10 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 12/22/2016   Page 2 / 7 https://www.phoenixcontact.com/gb/products/1714955 PCB terminal block - MKDS 5/ 2-6,35 - 1714955 Technical data Connection data 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 0.75 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. 0.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. 2.5 mm² Standards and Regulations Connection in acc. with standard EN-VDE CSA Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Drilling diagram Diagram Current carrying capacity [A] a 3,17 4,6 1,3 6,35 48 40 2 4 mm 32 24 16 8 0 0 20 40 60 80 100 Ambient temperature [°C] Type: MKDS 5/2-6,35 and MKDS 5/3-6,35 Test following DIN EN 60512-5-2:2003-01 Reduction factor = 1 No. of positions: 5 Dimensional drawing 12,5 a+6,35 48 40 2 4 mm 21,5 32 24 16 8 0 0 20 40 60 80 100 Ambient temperature [°C] 5,1 Current carrying capacity [A] Diagram 4,6 3,17 6,35 a Derating diagram for 5 pins;reduction factor=1 12/22/2016   Page 3 / 7 https://www.phoenixcontact.com/gb/products/1714955 PCB terminal block - MKDS 5/ 2-6,35 - 1714955 Classifications eCl@ss eCl@ss 4.0 27141109 eCl@ss 4.1 27141109 eCl@ss 5.0 27141190 eCl@ss 5.1 27141190 eCl@ss 6.0 27261101 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 ETIM 6.0 EC002643 UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 Approvals Approvals Approvals CSA / SEV / RS / CCA / EAC / cULus Recognized / DNV GL Ex Approvals Approval details CSA    http://www.csagroup.org/services/testingand-certification/certified-product-listing/   B D mm²/AWG/kcmil 28-10 28-10 Nominal current IN 10 A 10 A Nominal voltage UN 300 V 300 V  13631 12/22/2016   Page 4 / 7 https://www.phoenixcontact.com/gb/products/1714955 PCB terminal block - MKDS 5/ 2-6,35 - 1714955 Approvals  SEV   https://www.electrosuisse.ch/en/meta/shop/product-certificates.html     mm²/AWG/kcmil 4 Nominal current IN 32 A Nominal voltage UN 450 V  RS   http://www.rs-head.spb.ru/en/index.php  10.04059.250    IK-3249    B.01742 CCA      mm²/AWG/kcmil 4 Nominal voltage UN 450 V EAC   cULus Recognized    IK-3248  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-19770427   B D mm²/AWG/kcmil 30-10 30-10 Nominal current IN 30 A 10 A Nominal voltage UN 300 V 300 V DNV GL   https://www.dnvgl.com/  TAE00001EV Accessories Accessories Labeled terminal marker Marker card - SK 6,2/3,8:FORTL.ZAHLEN - 0804374 Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting type: Adhesive, for terminal block width: 6.2 mm, Lettering field: 6.2 x 3.8 mm     12/22/2016   Page 5 / 7 https://www.phoenixcontact.com/gb/products/1714955 PCB terminal block - MKDS 5/ 2-6,35 - 1714955 Accessories Marker card - SK 3,8 REEL P6,2 WH CUS - 0825126 Marker card, can be ordered: By card, white, labeled according to customer specifications, Mounting type: Adhesive, for terminal block width: 6.2 mm, Lettering field: continuous x 3.8 mm     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Marker strip - SK 5,0 WH:REEL - 0805221 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK X, THERMOMARK S1.1, THERMOMARK ROLL X1, Mounting type: Adhesive, Lettering field: continuous x 5 mm     Marker strip - SK 3,8 WH:REEL - 0805218 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK X, THERMOMARK S1.1, THERMOMARK ROLL X1, Mounting type: Adhesive, Lettering field: continuous x 3.8 mm     Additional products PCB terminal block - MKDS 5/ 3-6,35 - 1714968 PCB terminal block, Nominal current: 32 A, Nom. voltage: 630 V, Pitch: 6.35 mm, Number of positions: 3, Connection method: Screw connection with tension sleeve, Mounting: Wave soldering, Conductor/PCB connection direction: 0 °, Color: green, The article can be aligned to create different nos. of positions!     12/22/2016   Page 6 / 7 https://www.phoenixcontact.com/gb/products/1714955 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/22/2016   Page 7 / 7