1715802

https://www.phoenixcontact.com/gb/products/1715802 PCB terminal block - MKDS 1,5/10-5,08 - 1715802 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, Nominal current: 17.5 A, Nom. voltage: 400 V, Pitch: 5.08 mm, Number of positions: 10, Connection method: Screw connection with tension sleeve, Mounting: Wave soldering, Conductor/PCB connection direction: 0 °, Color: green, The article can be aligned to create different nos. of positions! Why buy this product  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  The latching on the side enables various numbers of positions to be combined Key Commercial Data Packing unit 50 STK GTIN GTIN 4017918024239 Weight per Piece (excluding packing) 14.210 g Custom tariff number 85369010 Country of origin Germany Technical data Dimensions Length 9.8 mm Pitch 5.08 mm Dimension a 45.72 mm Width 53.34 mm Constructional height 13.8 mm Height 17.3 mm Length of the solder pin 3.5 mm Pin dimensions 0,9 x 0,9 mm Hole diameter 1.3 mm 12/22/2016   Page 1 / 6 https://www.phoenixcontact.com/gb/products/1715802 PCB terminal block - MKDS 1,5/10-5,08 - 1715802 Technical data General Range of articles MKDS 1,5 Insulating material group I Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/3) 250 V Rated voltage (III/2) 400 V Rated voltage (II/2) 630 V Connection in acc. with standard EN-VDE Nominal current IN 17.5 A Nominal cross section 1.5 mm² Maximum load current 22 A Insulating material PA Solder pin surface Sn Flammability rating according to UL 94 V0 Internal cylindrical gage A1 Stripping length 7 mm Number of positions 10 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Connection data Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 14 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 1 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 0.75 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 0.5 mm² 12/22/2016   Page 2 / 6 https://www.phoenixcontact.com/gb/products/1715802 PCB terminal block - MKDS 1,5/10-5,08 - 1715802 Technical data Connection data 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. 0.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. 1 mm² Standards and Regulations Connection in acc. with standard EN-VDE CSA Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Drilling diagram a 9,8 2,5 (2,54) a+5 (a+5,08) 3,5 4,6 13,8 5 (5,08) Dimensional drawing Ø1,3 4,6 2,5 (2,54) 5 (5,08) a Classifications eCl@ss eCl@ss 4.0 27141109 eCl@ss 4.1 27141109 eCl@ss 5.0 27141190 eCl@ss 5.1 27141190 eCl@ss 6.0 27261101 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 ETIM 6.0 EC002643 12/22/2016   Page 3 / 6 https://www.phoenixcontact.com/gb/products/1715802 PCB terminal block - MKDS 1,5/10-5,08 - 1715802 Classifications UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 Approvals Approvals Approvals CSA / SEV / CCA / EAC / cULus Recognized / DNV GL Ex Approvals Approval details CSA    http://www.csagroup.org/services/testingand-certification/certified-product-listing/   B D mm²/AWG/kcmil 28-14 28-14 Nominal current IN 10 A 10 A Nominal voltage UN 300 V 300 V SEV    https://www.electrosuisse.ch/en/meta/shop/product-certificates.html     mm²/AWG/kcmil 2.5 Nominal current IN 24 A Nominal voltage UN 250 V CCA        mm²/AWG/kcmil 2.5 Nominal voltage UN 250 V  13631  IK-3248  IK-3249 12/22/2016   Page 4 / 6 https://www.phoenixcontact.com/gb/products/1715802 PCB terminal block - MKDS 1,5/10-5,08 - 1715802 Approvals EAC   cULus Recognized      B.01742  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-19770427   B D mm²/AWG/kcmil 30-14 30-14 Nominal current IN 15 A 10 A Nominal voltage UN 300 V 300 V DNV GL   https://www.dnvgl.com/  TAE00001EV Accessories Accessories Bridge Insertion bridge - EBP 2- 5 - 1733169 Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 2     Labeled terminal marker Marker card - SK 5,08/3,8:FORTL.ZAHLEN - 0804293 Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting type: Adhesive, for terminal block width: 5.08 mm, Lettering field: 5.08 x 3.8 mm     Pitch spacer Pitch spacer - RZ 1,25-MKDS 1,5 - 1702048 Pitch spacer, for adjusting the pitches between MKDS and GMKDS terminal blocks in mixed rows, 1.25 mm thick     12/22/2016   Page 5 / 6 https://www.phoenixcontact.com/gb/products/1715802 PCB terminal block - MKDS 1,5/10-5,08 - 1715802 Accessories Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/22/2016   Page 6 / 6