1716580

https://www.phoenixcontact.com/us/products/1716580 Feed-through plug - DFK-PC 5/10-ST-7,62 - 1716580 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through connector, nominal current: 41 A, rated voltage (III/2): 1000 V, nominal cross section: 6 mm², number of positions: 10, pitch: 7.62 mm, connection method: Screw connection with tension sleeve, color: green, contact surface: Tin Your advantages  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Flange system enables secure fixing to the housing panel by means of tool-free snap-in locking or screws Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4046356137201 Weight per Piece (excluding packing) 52.000 g Custom tariff number 85366990 Country of origin Poland Technical data Item properties Brief article description Feed-through plug Plug-in system POWER COMBICON 5 Type of contact Male connector Range of articles DFK-PC 5/..-ST Pitch 7.62 mm 02/10/2020   Page 1 / 11 https://www.phoenixcontact.com/us/products/1716580 Feed-through plug - DFK-PC 5/10-ST-7,62 - 1716580 Technical data Item properties Number of positions 10 Connection method Screw connection with tension sleeve Screw thread M3 Locking without Number of levels 1 Number of connections 10 Number of potentials 10 Electrical parameters Nominal current 41 A Nom. voltage 1000 V Rated voltage 630 V Rated voltage (III/2) 1000 V Rated voltage (II/2) 1000 V Rated surge voltage (III/3) 8 kV Rated surge voltage (III/2) 8 kV Rated surge voltage (II/2) 6 kV Connection capacity Connection method Screw connection with tension sleeve pluggable Yes Conductor cross section solid 0.2 mm² ... 10 mm² Conductor cross section flexible 0.2 mm² ... 6 mm² Conductor cross section AWG / kcmil 24 ... 10 Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 6 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 4 mm² 2 conductors with same cross section, solid 0.2 mm² ... 2.5 mm² 2 conductors with same cross section, flexible 0.2 mm² ... 4 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve 0.25 mm² ... 1.5 mm² 2 conductors with same cross section, stranded, with TWIN ferrules with plastic sleeve 0.25 mm² ... 2.5 mm² Stripping length 10 mm Torque 0.7 Nm ... 0.8 Nm Type of locking without Mounting flange without Material data - contact 02/10/2020   Page 2 / 11 https://www.phoenixcontact.com/us/products/1716580 Feed-through plug - DFK-PC 5/10-ST-7,62 - 1716580 Technical data Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics hot-dip tin-plated Metal surface terminal point (top layer) Tin (4 - 8 µm Sn) Metal surface contact area (top layer) Tin (4 - 8 µm Sn) Material data - housing Housing color green (6021) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Dimensions for the product Length [ l ] 48.93 mm Width [ w ] 101.7 mm Height [ h ] 26.24 mm Pitch 7.62 mm Height (without solder pin) 26.24 mm Dimension a 68.58 mm Packaging information Type of packaging packed in cardboard Pieces per package 10 Denomination packing units Pcs. Ambient conditions Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve) Termination and connection method Conductor connection test The stripped-off ends of the largest conductor can be completely inserted in the opening of the terminal point without using excessive force. Test result Test passed Test – repeated connection and release IEC 60999-1:1999-11 Test passed 02/10/2020   Page 3 / 11 https://www.phoenixcontact.com/us/products/1716580 Feed-through plug - DFK-PC 5/10-ST-7,62 - 1716580 Technical data Termination and connection method Test for conductor damage and slackening IEC 60999-1:1999-11 Test passed Pull-out test Pull-out test IEC 60999-1:1999-11 Test passed Conductor cross section / conductor type / tensile force 0.2 mm² / solid / > 10 N 0.2 mm² / flexible / > 10 N 6 mm² / solid / > 80 N Mechanical tests according to standard Visual examination Test passed IEC 60512-1-1:2002-02 Dimensional test Test passed IEC 60512-1-2:2002-02 Resistance of marking Test passed IEC 60068-2-70:1995-12 Result Test passed Specification IEC 60512-13-2:2006-02 No. of cycles 50 Insertion strength per pos. approx. 6N Withdraw strength per pos. approx. 4N Polarization and coding Test passed IEC 60512-13-5:2006-02 Air clearances and creepage distances Clearances and creepage distances IEC 60664-1:2007-04 Specification IEC 60664-1:2007-04 Minimum clearance - inhomogeneous field (III/3) 8 mm Minimum clearance - inhomogeneous field (III/2) 8 mm Minimum clearance - inhomogeneous field (II/2) 5.5 mm Minimum creepage distance value (III/3) 8 mm Minimum creepage distance value (III/2) 5 mm Minimum creepage distance value (II/2) 5 mm Electrical tests - Function Specification IEC 60999-1:1999-11 Temperature cycles Specification IEC 60999-1:1999-11 Test current (minimum cross section) 5 A DC Test current (maximum cross section) 32 A DC Temperature cycles 192 Current carrying capacity / derating curves 02/10/2020   Page 4 / 11 https://www.phoenixcontact.com/us/products/1716580 Feed-through plug - DFK-PC 5/10-ST-7,62 - 1716580 Technical data Mechanical tests (A) Insertion strength per pos. approx. 6N Withdraw strength per pos. approx. 4N Polarization when inserted requirement >20 N Test passed Durability tests (B) Specification IEC 60512-9-1:2010-03 Contact resistance R1 0.5 mΩ Insertion/withdrawal cycles 50 Contact resistance R2 0.6 mΩ Impulse withstand voltage at sea level 9.8 kV Power-frequency withstand voltage 4.26 kV Climatic tests (D) Specification ISO 6988:1985-02 Cold stress -40 °C/2 h Thermal stress 100 °C/168 h Corrosive stress 0.2 dm SO2 on 300 dm /40 °C/1 cycle Impulse withstand voltage at sea level 9.8 kV Power-frequency withstand voltage 4.26 kV 3 3 Environmental and durability tests (E) Specification IEC 61984:2008-10 Result, degree of protection, IP code Finger safety with IP20 test finger Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 02/10/2020   Page 5 / 11 https://www.phoenixcontact.com/us/products/1716580 Feed-through plug - DFK-PC 5/10-ST-7,62 - 1716580 Diagram Derating curve for: DFK-PC 5/...-ST-7,62 with PC 5/...-ST-7,62 Conductor cross section = 6 mm² Diagram Derating curve for: DFK-PC 5/...-ST-7,62 with PC 5/...-ST-7,62 Conductor cross section = 10 mm² 02/10/2020   Page 6 / 11 https://www.phoenixcontact.com/us/products/1716580 Feed-through plug - DFK-PC 5/10-ST-7,62 - 1716580 Diagram Type: SPC 5/..-ST-7,62 with DFK-PC 5/..-ST-7,62 Dimensional drawing Sheet metal cutout for snap-on. 02/10/2020   Page 7 / 11 https://www.phoenixcontact.com/us/products/1716580 Feed-through plug - DFK-PC 5/10-ST-7,62 - 1716580 Dimensional drawing Sheet metal cutout for screw connection. Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27260700 02/10/2020   Page 8 / 11 https://www.phoenixcontact.com/us/products/1716580 Feed-through plug - DFK-PC 5/10-ST-7,62 - 1716580 Classifications eCl@ss eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700 eCl@ss 7.0 27440309 eCl@ss 8.0 27440309 eCl@ss 9.0 27440309 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002638 ETIM 5.0 EC002637 ETIM 6.0 EC002638 ETIM 7.0 EC002638 UNSPSC UNSPSC 6.01 30211810 UNSPSC 7.0901 39121409 UNSPSC 11 39121409 UNSPSC 12.01 39121409 UNSPSC 13.2 39121409 UNSPSC 18.0 39121409 UNSPSC 19.0 39121409 UNSPSC 20.0 39121409 UNSPSC 21.0 39121409 Approvals Approvals Approvals EAC / cULus Recognized Ex Approvals Approval details 02/10/2020   Page 9 / 11 https://www.phoenixcontact.com/us/products/1716580 Feed-through plug - DFK-PC 5/10-ST-7,62 - 1716580 Approvals EAC      B.01742 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-19920722   B C Nominal voltage UN 600 V 600 V Nominal current IN 41 A 41 A mm²/AWG/kcmil 24-8 24-8 Accessories Accessories Coding element Coding profile - CP-PC RD - 1701967 Coding profile, for plugging into the coding ribs of the plug at a later date, insulating material, color: Red     Connector set Accessories - DFK-PC MOUNT SET - 1054021 Contains 20 pcs. latch and screw elements for feed-through connectors each     Labeled terminal marker Marker card - SK 7,62/3,8:FORTL.ZAHLEN - 0804549 Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: adhesive, for terminal block width: 7.62 mm, lettering field size: 7.62 x 3.8 mm     02/10/2020   Page 10 / 11 https://www.phoenixcontact.com/us/products/1716580 Feed-through plug - DFK-PC 5/10-ST-7,62 - 1716580 Accessories Marker card - SK 3,8 REEL P7,62 WH CUS - 0825128 Marker card, Card, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 7.62 mm, lettering field size: continuous x 3.8 mm     Mounting material Accessories - DFK-PC 16-SS - 1705449 Screw set for DFK-PC 16... connectors     Screwdriver tools Philips screwdriver - SZK PZ1 VDE - 1206450 Screwdriver, PZ crosshead, VDE insulated, size: PZ 1 x 80 mm, 2-component grip, with non-slip grip     Terminal marking Marker card - SK U/3,8 WH:UNBEDRUCKT - 0803906 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm, Number of individual labels: 1440     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 02/10/2020   Page 11 / 11