1716603

https://www.phoenixcontact.com/us/products/1716603 Feed-through plug - DFK-PC 5/12-ST-7,62 - 1716603 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through connector, nominal current: 41 A, number of positions: 12, pitch: 7.62 mm, connection method: Screw connection with tension sleeve, color: green, contact surface: Tin Your advantages  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Flange system enables secure fixing to the housing panel by means of tool-free snap-in locking or screws Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4046356137225 Weight per Piece (excluding packing) 68.000 g Custom tariff number 85366990 Country of origin Poland Technical data Dimensions Length [ l ] 48.93 mm Width [ w ] 116.94 mm Height [ h ] 26.24 mm Pitch 7.62 mm Dimension a 83.82 mm 09/05/2019   Page 1 / 9 https://www.phoenixcontact.com/us/products/1716603 Feed-through plug - DFK-PC 5/12-ST-7,62 - 1716603 Technical data General Range of articles DFK-PC 5/..-ST Number of positions 12 Connection method Screw connection with tension sleeve Insulating material group I Rated surge voltage (III/3) 8 kV Rated surge voltage (III/2) 8 kV Rated surge voltage (II/2) 6 kV Rated voltage (III/3) 630 V Rated voltage (III/2) 1000 V Rated voltage (II/2) 1000 V Connection in acc. with standard EN-VDE Nominal current IN 41 A Nominal cross section 6 mm² Maximum load current 41 A Insulating material PA Flammability rating according to UL 94 V0 Stripping length 10 mm Screw thread M3 Tightening torque, min 0.7 Nm Tightening torque max 0.8 Nm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 10 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 6 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 10 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 2.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 4 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 09/05/2019   Page 2 / 9 https://www.phoenixcontact.com/us/products/1716603 Feed-through plug - DFK-PC 5/12-ST-7,62 - 1716603 Technical data Connection data 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.25 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. Minimum AWG according to UL/CUL 24 Maximum AWG according to UL/CUL 8 Standards and Regulations Connection in acc. with standard EN-VDE CUL Flammability rating according to UL 94 V0 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Diagram Derating curve for: DFK-PC 5/...-ST-7,62 with PC 5/...-ST-7,62 09/05/2019   Page 3 / 9 https://www.phoenixcontact.com/us/products/1716603 Feed-through plug - DFK-PC 5/12-ST-7,62 - 1716603 Conductor cross section = 6 mm² Diagram Derating curve for: DFK-PC 5/...-ST-7,62 with PC 5/...-ST-7,62 Conductor cross section = 10 mm² Diagram Type: SPC 5/..-ST-7,62 with DFK-PC 5/..-ST-7,62 09/05/2019   Page 4 / 9 https://www.phoenixcontact.com/us/products/1716603 Feed-through plug - DFK-PC 5/12-ST-7,62 - 1716603 Dimensional drawing Sheet metal cutout for snap-on. 09/05/2019   Page 5 / 9 https://www.phoenixcontact.com/us/products/1716603 Feed-through plug - DFK-PC 5/12-ST-7,62 - 1716603 Dimensional drawing Sheet metal cutout for screw connection. Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27260700 09/05/2019   Page 6 / 9 https://www.phoenixcontact.com/us/products/1716603 Feed-through plug - DFK-PC 5/12-ST-7,62 - 1716603 Classifications eCl@ss eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700 eCl@ss 7.0 27440309 eCl@ss 8.0 27440309 eCl@ss 9.0 27440309 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002638 ETIM 5.0 EC002637 ETIM 6.0 EC002638 ETIM 7.0 EC002638 UNSPSC UNSPSC 6.01 30211810 UNSPSC 7.0901 39121409 UNSPSC 11 39121409 UNSPSC 12.01 39121409 UNSPSC 13.2 39121409 Approvals Approvals Approvals EAC / cULus Recognized Ex Approvals Approval details EAC      B.01742 09/05/2019   Page 7 / 9 https://www.phoenixcontact.com/us/products/1716603 Feed-through plug - DFK-PC 5/12-ST-7,62 - 1716603 Approvals cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 41 A 41 A mm²/AWG/kcmil 24-8 24-8  E60425-19920722 Accessories Accessories Coding element Coding profile - CP-PC RD - 1701967 Coding profile, for plugging into the coding ribs of the plug at a later date, insulating material, color: Red     Labeled terminal marker Marker card - SK 7,62/3,8:FORTL.ZAHLEN - 0804549 Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: adhesive, for terminal block width: 7.62 mm, lettering field size: 7.62 x 3.8 mm     Marker card - SK 3,8 REEL P7,62 WH CUS - 0825128 Marker card, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 7.62 mm, lettering field size: continuous x 3.8 mm     Mounting material 09/05/2019   Page 8 / 9 https://www.phoenixcontact.com/us/products/1716603 Feed-through plug - DFK-PC 5/12-ST-7,62 - 1716603 Accessories Accessories - DFK-PC 16-SS - 1705449 Screw set for DFK-PC 16... connectors     Screwdriver tools Philips screwdriver - SZK PZ1 VDE - 1206450 Screwdriver, PZ crosshead, VDE insulated, size: PZ 1 x 80 mm, 2-component grip, with non-slip grip     Terminal marking Marker card - SK U/3,8 WH:UNBEDRUCKT - 0803906 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm     Marker strip - SK 3,8 WH:REEL - 0805218 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 90000 mm, lettering field size: continuous x 3.8 mm     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/05/2019   Page 9 / 9