https://www.phoenixcontact.com/us/products/1718326
Printed-circuit board connector - IPC 5/ 8-STGCL-7,62 - 1718326
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PCB connector, nominal current: 41 A, rated voltage (III/2): 1000 V, nominal cross section: 6 mm², number of
positions: 8, pitch: 7.62 mm, connection method: Screw connection with tension sleeve, color: green, contact
surface: Tin
The figure shows a 5-pos. version of
the product
Your advantages
Well-known connection principle allows worldwide use
Low temperature rise, thanks to maximum contact force
Allows connection of two conductors
Inverted connector with pin contacts for touch-proof device outputs or free-hanging cable/cable connections
The automatically locking Click and Lock system prevents accidental disconnection
600 V UL approval in the smallest of dimensions
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4046356175333
Weight per Piece (excluding packing)
35.350 g
Custom tariff number
85366990
Country of origin
Poland
Technical data
Item properties
Brief article description
Printed-circuit board connector
Plug-in system
POWER COMBICON 5
06/27/2020 Page 1 / 11
https://www.phoenixcontact.com/us/products/1718326
Printed-circuit board connector - IPC 5/ 8-STGCL-7,62 - 1718326
Technical data
Item properties
Type of contact
Male connector
Range of articles
IPC 5/..-STGCL
Pitch
7.62 mm
Number of positions
8
Connection method
Screw connection with tension sleeve
Drive form screw head
Slotted Pozidriv (Z1L)
Screw thread
M3
Locking
Click & Lock latching slide
Number of levels
1
Number of connections
8
Number of potentials
8
Electrical parameters
Nominal current
41 A
Nom. voltage
1000 V
Rated voltage
1000 V
Rated voltage (III/2)
1000 V
Rated voltage (II/2)
1000 V
Rated surge voltage (III/3)
8 kV
Rated surge voltage (III/2)
8 kV
Rated surge voltage (II/2)
6 kV
Connection capacity
Connection method
Screw connection with tension sleeve
pluggable
Yes
Conductor cross section solid
0.2 mm² ... 10 mm²
Conductor cross section flexible
0.2 mm² ... 6 mm²
Conductor cross section AWG / kcmil
24 ... 10
Conductor cross section flexible, with ferrule without plastic sleeve
0.25 mm² ... 6 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 4 mm²
2 conductors with same cross section, solid
0.2 mm² ... 2.5 mm²
2 conductors with same cross section, flexible
0.2 mm² ... 4 mm²
2 conductors with same cross section, flexible, with ferrule without plastic
sleeve
0.25 mm² ... 1.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with
plastic sleeve
0.25 mm² ... 2.5 mm²
Stripping length
10 mm
Torque
0.7 Nm ... 0.8 Nm
Flange specifications
06/27/2020 Page 2 / 11
https://www.phoenixcontact.com/us/products/1718326
Printed-circuit board connector - IPC 5/ 8-STGCL-7,62 - 1718326
Technical data
Flange specifications
Type of locking
Clip locking
Mounting flange
Click & Lock latching window
Material data - contact
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/
JEDEC JESD 201
Contact material
Cu alloy
Surface characteristics
hot-dip tin-plated
Metal surface terminal point (top layer)
Tin (4 - 8 µm Sn)
Metal surface contact area (top layer)
Tin (4 - 8 µm Sn)
Material data - housing
Housing color
green (6021)
Insulating material
PA
Insulating material group
I
CTI according to IEC 60112
600
Flammability rating according to UL 94
V0
Glow wire flammability index GWFI according to EN 60695-2-12
850
Glow wire ignition temperature GWIT according to EN 60695-2-13
775
Temperature for the ball pressure test according to EN 60695-10-2
125 °C
Dimensions for the product
Length [ l ]
36.55 mm
Width [ w ]
63.76 mm
Height [ h ]
22.9 mm
Pitch
7.62 mm
Height (without solder pin)
22.9 mm
Packaging information
Type of packaging
packed in cardboard
Pieces per package
50
Denomination packing units
Pcs.
Ambient conditions
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 100 °C
Ambient temperature (operation)
-40 °C ... 100 °C (dependent on the derating curve)
Termination and connection method
Test for conductor damage and slackening
IEC 60999-1:1999-11
Test passed
06/27/2020 Page 3 / 11
https://www.phoenixcontact.com/us/products/1718326
Printed-circuit board connector - IPC 5/ 8-STGCL-7,62 - 1718326
Technical data
Pull-out test
Pull-out test
IEC 60999-1:1999-11
Test passed
Conductor cross section / conductor type / tensile force
0.2 mm² / solid / > 10 N
0.2 mm² / flexible / > 10 N
10 mm² / solid / > 90 N
6 mm² / flexible / > 80 N
Mechanical tests according to standard
Test specification
IEC 61984
Visual examination
Test passed IEC 60512-1-1:2002-02
Dimensional test
Test passed IEC 60512-1-2:2002-02
Resistance of marking
Test passed IEC 60068-2-70:1995-12
Result
Test passed
Specification
IEC 60512-13-2:2006-02
No. of cycles
25
Insertion strength per pos. approx.
6N
Withdraw strength per pos. approx.
2N
Polarization and coding
Test passed IEC 60512-13-5:2006-02
Air clearances and creepage distances
Clearances and creepage distances
IEC 60664-1:2007-04
Specification
IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3)
8 mm
Minimum clearance - inhomogeneous field (III/2)
8 mm
Minimum clearance - inhomogeneous field (II/2)
5.5 mm
Minimum creepage distance value (III/3)
12.5 mm
Minimum creepage distance value (III/2)
5 mm
Minimum creepage distance value (II/2)
5 mm
Current carrying capacity / derating curves
Specification
IEC 61984
Mechanical tests (A)
Test specification
IEC 61984
Insertion strength per pos. approx.
6N
Withdraw strength per pos. approx.
2N
Polarization when inserted requirement >20 N
Test passed
Durability tests (B)
Specification
IEC 60512-9-1:2010-03
06/27/2020 Page 4 / 11
https://www.phoenixcontact.com/us/products/1718326
Printed-circuit board connector - IPC 5/ 8-STGCL-7,62 - 1718326
Technical data
Durability tests (B)
Contact resistance R1
0.5 mΩ
Insertion/withdrawal cycles
25
Contact resistance R2
0.6 mΩ
Impulse withstand voltage at sea level
9.8 kV
Power-frequency withstand voltage
4.26 kV
Insulation resistance, neighboring positions
12 TΩ
Climatic tests (D)
Specification
ISO 6988:1985-02
Cold stress
-40 °C/2 h
Thermal stress
100 °C/168 h
Corrosive stress
0.2 dm SO2 on 300 dm /40 °C/1 cycle
Impulse withstand voltage at sea level
9.8 kV
Power-frequency withstand voltage
4.26 kV
3
3
Environmental and durability tests (E)
Specification
IEC 61984:2008-10
Result, degree of protection, IP code
Finger safety with IP20 test finger
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
06/27/2020 Page 5 / 11
https://www.phoenixcontact.com/us/products/1718326
Printed-circuit board connector - IPC 5/ 8-STGCL-7,62 - 1718326
Schematic diagram
Click and Lock system method of operation
06/27/2020 Page 6 / 11
https://www.phoenixcontact.com/us/products/1718326
Printed-circuit board connector - IPC 5/ 8-STGCL-7,62 - 1718326
Diagram
Derating curve for: IPC 5/...-ST-7,62 with PC 5/...-ST-7,62
Conductor cross section = 10 mm²
Diagram
Derating curve for: IPC 5/...-ST-7,62 with IPC 5/...-G-7,62
Conductor cross section = 10 mm²
06/27/2020 Page 7 / 11
https://www.phoenixcontact.com/us/products/1718326
Printed-circuit board connector - IPC 5/ 8-STGCL-7,62 - 1718326
Diagram
Derating curve for: IPC 5/...-ST-7,62 with IPC 5/....-G-7,62
Conductor cross section 6 mm²
Dimensional drawing
Classifications
eCl@ss
eCl@ss 10.0.1
27440309
06/27/2020 Page 8 / 11
https://www.phoenixcontact.com/us/products/1718326
Printed-circuit board connector - IPC 5/ 8-STGCL-7,62 - 1718326
Classifications
eCl@ss
eCl@ss 4.0
27260700
eCl@ss 4.1
27260700
eCl@ss 5.0
27260700
eCl@ss 5.1
27260700
eCl@ss 6.0
27260700
eCl@ss 7.0
27440309
eCl@ss 8.0
27440309
eCl@ss 9.0
27440309
ETIM
ETIM 3.0
EC001121
ETIM 4.0
EC002638
ETIM 5.0
EC002638
ETIM 6.0
EC002638
ETIM 7.0
EC002638
UNSPSC
UNSPSC 6.01
30211810
UNSPSC 7.0901
39121409
UNSPSC 11
39121409
UNSPSC 12.01
39121409
UNSPSC 13.2
39121409
UNSPSC 18.0
39121409
UNSPSC 19.0
39121409
UNSPSC 20.0
39121409
UNSPSC 21.0
39121409
Approvals
Approvals
Approvals
EAC / cULus Recognized
Ex Approvals
Approval details
06/27/2020 Page 9 / 11
https://www.phoenixcontact.com/us/products/1718326
Printed-circuit board connector - IPC 5/ 8-STGCL-7,62 - 1718326
Approvals
EAC
B.01687
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
E60425-19920722
B
C
Nominal voltage UN
600 V
600 V
Nominal current IN
41 A
41 A
mm²/AWG/kcmil
24-8
24-8
Accessories
Accessories
Coding element
Coding profile - CP-PC RD - 1701967
Coding profile, for plugging into the coding ribs of the plug at a later date, insulating material, color: Red
Labeled terminal marker
Marker card - SK 7,62/3,8:FORTL.ZAHLEN - 0804549
Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type:
adhesive, for terminal block width: 7.62 mm, lettering field size: 7.62 x 3.8 mm
Marker card - SK 3,8 REEL P7,62 WH CUS - 0825128
Marker card, Card, can be ordered: By card, white, labeled according to customer specifications, mounting type:
adhesive, for terminal block width: 7.62 mm, lettering field size: continuous x 3.8 mm
06/27/2020 Page 10 / 11
https://www.phoenixcontact.com/us/products/1718326
Printed-circuit board connector - IPC 5/ 8-STGCL-7,62 - 1718326
Accessories
Screwdriver tools
Philips screwdriver - SZK PZ1 VDE - 1206450
Screwdriver, PZ crosshead, VDE insulated, size: PZ 1 x 80 mm, 2-component grip, with non-slip grip
Terminal marking
Marker card - SK U/3,8 WH:UNBEDRUCKT - 0803906
Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems,
mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm, Number of individual labels:
1440
Marker strip - SK 3,8 WH:REEL - 0805218
Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL,
THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for
terminal block width: 90000 mm, lettering field size: continuous x 3.8 mm, Number of individual labels: 210000
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
06/27/2020 Page 11 / 11
