1719031

https://www.phoenixcontact.com/us/products/1719031 PCB terminal block - MKKDS 5/ 2-6,35 - 1719031 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, nominal current: 41 A, nom. voltage: 630 V, pitch: 6.35 mm, number of positions: 2, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green. The article can be aligned to create different nos. of positions! The figure shows a 2-pos. version of the product Your advantages  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  The latching on the side enables various numbers of positions to be combined  Conductor connection on several levels enables higher contact density Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918122713 Weight per Piece (excluding packing) 14.360 g Custom tariff number 85369010 Country of origin Poland Technical data Dimensions Length [ l ] 28 mm Pitch 6.35 mm Dimension a 6.35 mm Width [ w ] 12.7 mm 06/02/2019   Page 1 / 7 https://www.phoenixcontact.com/us/products/1719031 PCB terminal block - MKKDS 5/ 2-6,35 - 1719031 Technical data Dimensions Height 38.9 mm Height [ h ] 44.1 mm Solder pin [P] 5.2 mm Hole diameter 1.3 mm General Range of articles MKKDS 5 Insulating material group I Rated surge voltage (III/3) 6 kV Rated surge voltage (III/2) 6 kV Rated surge voltage (II/2) 6 kV Rated voltage (III/3) 500 V Rated voltage (III/2) 630 V Rated voltage (II/2) 1000 V Connection in acc. with standard EN-VDE Nominal current IN 41 A Nominal cross section 4 mm² Maximum load current 41 A Insulating material PA Flammability rating according to UL 94 V0 Internal cylindrical gage A4 Stripping length 8 mm Number of positions 2 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 6 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 10 06/02/2019   Page 2 / 7 https://www.phoenixcontact.com/us/products/1719031 PCB terminal block - MKKDS 5/ 2-6,35 - 1719031 Technical data Connection data 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 0.75 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. Standards and Regulations Connection in acc. with standard EN-VDE CSA Flammability rating according to UL 94 V0 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Drilling diagram 70 3,16 a 60 3,16 6,35 50 ! 40 20 != 6 mm² 10 0 0 10 20 30 40 50 60 70 80 90 100 110 1,3 17,5 30 7,9 Current strength [A] Diagram Ambient temperature [°C] Type: MKKDS 5/..-6,35 06/02/2019   Page 3 / 7 https://www.phoenixcontact.com/us/products/1719031 PCB terminal block - MKKDS 5/ 2-6,35 - 1719031 Dimensional drawing a+6,35 3,17 5,2 21,5 38,9 28 7,9 17,5 3,17 6,35 a The figure shows a 3-position version Classifications eCl@ss eCl@ss 4.0 27141109 eCl@ss 4.1 27141109 eCl@ss 5.0 27141190 eCl@ss 5.1 27261100 eCl@ss 6.0 27261100 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 ETIM 6.0 EC002643 ETIM 7.0 EC002643 UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 Approvals Approvals 06/02/2019   Page 4 / 7 https://www.phoenixcontact.com/us/products/1719031 PCB terminal block - MKKDS 5/ 2-6,35 - 1719031 Approvals Approvals CSA / CCA / SEV / EAC / cULus Recognized Ex Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/   D B Nominal voltage UN 300 V 300 V Nominal current IN 10 A 10 A mm²/AWG/kcmil 28-10 28-10 CCA     IK-3249  https://www.electrosuisse.ch/de/meta/shop/produktezertifikate.html  IK-4199     Nominal voltage UN 450 V mm²/AWG/kcmil 4 SEV    13631     Nominal voltage UN 450 V Nominal current IN 32 A mm²/AWG/kcmil 4 EAC      B.01742 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-19770427   D B Nominal voltage UN 300 V 300 V 06/02/2019   Page 5 / 7 https://www.phoenixcontact.com/us/products/1719031 PCB terminal block - MKKDS 5/ 2-6,35 - 1719031 Approvals   D B Nominal current IN 10 A 30 A mm²/AWG/kcmil 30-10 30-10 Accessories Accessories Labeled terminal marker Marker card - SK 6,2/3,8:FORTL.ZAHLEN - 0804374 Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 6.2 mm, lettering field size: 6.2 x 3.8 mm     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Marker card - SK 6,2/3,8:UNBEDRUCKT - 0805425 Marker card, Card, white, unlabeled, can be labeled with: Marker pen, mounting type: adhesive, for terminal block width: 6.2 mm, lettering field size: 6.2 x 3.8 mm     Marker strip - SK 5,0 WH:REEL - 0805221 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: continuous x 5 mm     06/02/2019   Page 6 / 7 https://www.phoenixcontact.com/us/products/1719031 PCB terminal block - MKKDS 5/ 2-6,35 - 1719031 Accessories Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 06/02/2019   Page 7 / 7