1727117

https://www.phoenixcontact.com/gb/products/1727117 PCB terminal block - MKDS 1/12-3,81 - 1727117 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, Nominal current: 13.5 A, Nom. voltage: 200 V, Pitch: 3.81 mm, Number of positions: 12, Connection method: Screw connection with tension sleeve, Mounting: Wave soldering, Conductor/PCB connection direction: 0 °, Color: green The figure shows a 10-position version of the product Why buy this product  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Extremely small design for the respective conductor cross section Key Commercial Data Packing unit 50 STK GTIN GTIN 4017918025588 Weight per Piece (excluding packing) 6.280 g Custom tariff number 85369010 Country of origin Germany Technical data Dimensions Length 7.3 mm Pitch 3.81 mm Dimension a 41.91 mm Width 45.71 mm Constructional height 8.5 mm Height 12 mm Length of the solder pin 3.5 mm Pin dimensions 0,5 x 0,9 mm 12/22/2016   Page 1 / 6 https://www.phoenixcontact.com/gb/products/1727117 PCB terminal block - MKDS 1/12-3,81 - 1727117 Technical data Dimensions Hole diameter 1.1 mm General Range of articles MKDS 1 Insulating material group I Rated surge voltage (III/3) 2.5 kV Rated surge voltage (III/2) 2.5 kV Rated surge voltage (II/2) 2.5 kV Rated voltage (III/3) 160 V Rated voltage (III/2) 200 V Rated voltage (II/2) 400 V Connection in acc. with standard EN-VDE Nominal current IN 13.5 A Nominal cross section 1.5 mm² Insulating material PA Solder pin surface Sn Flammability rating according to UL 94 V0 Stripping length 5 mm Number of positions 12 Screw thread M2 Tightening torque, min 0.22 Nm Tightening torque max 0.25 Nm Connection data Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 0.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 0.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 16 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 0.5 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 0.34 mm² Standards and Regulations Connection in acc. with standard EN-VDE CSA 12/22/2016   Page 2 / 6 https://www.phoenixcontact.com/gb/products/1727117 PCB terminal block - MKDS 1/12-3,81 - 1727117 Technical data Standards and Regulations Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Drilling diagram a Dimensional drawing 2 (1,9) 7,3 a+4 (a+3,8) 3,5 3,6 8,5 3,5 (3,81) 3,6 Ø1,1 2 (1,9) 3,5 (3,81) a Classifications eCl@ss eCl@ss 4.0 27141109 eCl@ss 4.1 27141109 eCl@ss 5.0 27141190 eCl@ss 5.1 27141190 eCl@ss 6.0 27261101 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 ETIM 6.0 EC002643 UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 12/22/2016   Page 3 / 6 https://www.phoenixcontact.com/gb/products/1727117 PCB terminal block - MKDS 1/12-3,81 - 1727117 Approvals Approvals Approvals CSA / SEV / CCA / IECEE CB Scheme / EAC / cULus Recognized Ex Approvals Approval details CSA    http://www.csagroup.org/services/testingand-certification/certified-product-listing/   B D mm²/AWG/kcmil 28-16 28-16 Nominal current IN 10 A 10 A Nominal voltage UN 150 V 300 V SEV    https://www.electrosuisse.ch/en/meta/shop/product-certificates.html     mm²/AWG/kcmil 1.5 Nominal current IN 12 A Nominal voltage UN 125 V CCA   IK-2722  http://www.iecee.org/  CH-8225   mm²/AWG/kcmil 1.5 Nominal current IN 12 A Nominal voltage UN 125 V   IK-3542-M1     IECEE CB Scheme   13631     mm²/AWG/kcmil 1.5 Nominal current IN 12 A Nominal voltage UN 125 V 12/22/2016   Page 4 / 6 https://www.phoenixcontact.com/gb/products/1727117 PCB terminal block - MKDS 1/12-3,81 - 1727117 Approvals EAC   cULus Recognized      B.01742  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-19770427   B D mm²/AWG/kcmil 30-16 30-16 Nominal current IN 10 A 10 A Nominal voltage UN 300 V 300 V Accessories Accessories Labeled terminal marker Marker card - SK 3,81/2,8:FORTL.ZAHLEN - 0804109 Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting type: Adhesive, for terminal block width: 3.81 mm, Lettering field: 3.81 x 2.8 mm     Marker pen Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     Screwdriver tools Screwdriver - SZS 0,4X2,5 VDE - 1205037 Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip     12/22/2016   Page 5 / 6 https://www.phoenixcontact.com/gb/products/1727117 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/22/2016   Page 6 / 6