1751235

https://www.phoenixcontact.com/us/products/1751235 PCB terminal block - SMKDS 1/16-3,5 - 1751235 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, Nominal current: 10 A, Nom. voltage: 200 V, Pitch: 3.5 mm, Number of positions: 16, Connection method: Screw connection with tension sleeve, Mounting: Wave soldering, Conductor/PCB connection direction: 35 °, Color: green The figure shows a 10-position version of the product Product Features ■ ■ Conductor and screwdriver axis at an angle of 55° to the usual direction Arrangement of several rows of terminal blocks one behind the other – multi-level effect with the same design height Key Commercial Data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 9.45 g Custom tariff number 85369010 Country of origin Germany Technical data Dimensions Length 10 mm Pitch 3.50 mm Dimension a 52.5 mm Width 56.5 mm Constructional height 9.5 mm Height 13 mm Length of the solder pin 3.5 mm 04/13/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1751235 PCB terminal block - SMKDS 1/16-3,5 - 1751235 Technical data Dimensions Pin dimensions 0,5 x 0,9 mm Hole diameter 1.1 mm General Range of articles SMKDS 1 Insulating material group I Rated surge voltage (III/3) 2.5 kV Rated surge voltage (III/2) 2.5 kV Rated surge voltage (II/2) 2.5 kV Rated voltage (III/3) 160 V Rated voltage (III/2) 200 V Rated voltage (II/2) 400 V Connection in acc. with standard EN-VDE Nominal current IN 10 A Nominal cross section 1 mm² Maximum load current 12 A Insulating material PA Solder pin surface Sn Flammability rating according to UL 94 V0 Stripping length 5 mm Number of positions 16 Screw thread M2 Tightening torque, min 0.22 Nm Tightening torque max 0.25 Nm Connection data Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 0.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 0.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 16 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 0.5 mm² 04/13/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1751235 PCB terminal block - SMKDS 1/16-3,5 - 1751235 Technical data Connection data 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 0.2 mm² Standards and Regulations Connection in acc. with standard EN-VDE CSA Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141109 eCl@ss 4.1 27141109 eCl@ss 5.0 27141190 eCl@ss 5.1 27141190 eCl@ss 6.0 27261101 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 Approvals Approvals Approvals CSA / SEV / CCA / IECEE CB Scheme / SEV / EAC / EAC / cULus Recognized / cULus Recognized 04/13/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1751235 PCB terminal block - SMKDS 1/16-3,5 - 1751235 Approvals Ex Approvals Approvals submitted Approval details CSA    B D mm²/AWG/kcmil 28-16 28-16 Nominal current IN 10 A 10 A Nominal voltage UN 150 V 300 V SEV      mm²/AWG/kcmil 1.5 Nominal current IN 12 A Nominal voltage UN 125 V CCA  IECEE CB Scheme  SEV      mm²/AWG/kcmil 1.5 Nominal voltage UN 125 V EAC  EAC  04/13/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1751235 PCB terminal block - SMKDS 1/16-3,5 - 1751235 Approvals cULus Recognized    B D mm²/AWG/kcmil 30-16 30-16 Nominal current IN 10 A 10 A Nominal voltage UN 300 V 300 V cULus Recognized  Drawings Diagram Drilling diagram a 3,5 4,3 2 1,1 Type: SMKDS 1/5-3,5 Tested according to DIN EN 60512-5-2:2003-01 Reduction factor = 1 Number of positions: 5 Dimensional drawing 10 3,5 9,5 a+4 4,3 2 3,5 a Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/13/2016   Page 5 / 5