1766424

https://www.phoenixcontact.com/us/products/1766424 Feed-through header - GMSTBA 2,5/10-G - 1766424 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB headers, nominal current: 12 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of positions: 10, pitch: 7.5 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.5 mm The figure shows a 10-position version of the product Your advantages  Maximum flexibility when it comes to device design – one header for connectors with different connection technologies  Well-known mounting principle allows worldwide use  Larger pitch for increased voltage requirements  Closed contour for optimum stability of the plug-in connection Key Commercial Data Packing unit 1 pc Minimum order quantity 100 pc GTIN GTIN 4017918032449 Weight per Piece (excluding packing) 6.030 g Custom tariff number 85366930 Country of origin Germany Technical data Item properties Brief article description Feed-through header Plug-in system CLASSIC COMBICON Type of contact Male connector Range of articles GMSTBA 2,5/..-G 01/17/2020   Page 1 / 10 https://www.phoenixcontact.com/us/products/1766424 Feed-through header - GMSTBA 2,5/10-G - 1766424 Technical data Item properties Pitch 7.5 mm Number of positions 10 Mounting type Wave soldering Pin layout Linear pinning Locking without Number of levels 1 Number of connections 10 Number of potentials 10 Electrical parameters Nom. voltage 630 V Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics Tin-plated Metal surface contact area (top layer) Tin (3 - 5 µm Sn) Metal surface contact area (middle layer) Nickel (1.3 - 3 µm Ni), Metal surface soldering area (top layer) Tin (3 - 5 µm Sn) Metal surface soldering area (middle layer) Nickel (1.3 - 3 µm Ni) Material data - housing Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Dimensions for the product Length [ l ] 12 mm Width [ w ] 75 mm Height [ h ] 12.1 mm Pitch 7.5 mm Height (without solder pin) 8.6 mm Solder pin [P] 3.5 mm Pin dimensions 1 x 1 mm Dimension a 67.5 mm 01/17/2020   Page 2 / 10 https://www.phoenixcontact.com/us/products/1766424 Feed-through header - GMSTBA 2,5/10-G - 1766424 Technical data Dimensions for PCB design Hole diameter 1.4 mm Packaging information Type of packaging packed in cardboard Pieces per package 100 Denomination packing units Pcs. General product information Note In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. Ambient conditions Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve) Air clearances and creepage distances Clearances and creepage distances IEC 60664-1:2007-04 Specification IEC 60664-1:2007-04 Rated insulation voltage (III/3) 400 V Rated insulation voltage (III/2) 630 V Rated insulation voltage (II/2) 630 V Rated surge voltage (III/3) 6 kV Rated surge voltage (III/2) 6 kV Rated surge voltage (II/2) 6 kV Minimum clearance - inhomogeneous field (III/3) 5.5 mm Minimum clearance - inhomogeneous field (III/2) 5.5 mm Minimum clearance - inhomogeneous field (II/2) 5.5 mm Minimum creepage distance value (III/3) 6.3 mm Minimum creepage distance value (III/2) 5.5 mm Minimum creepage distance value (II/2) 5.5 mm Mechanical tests (A) Test specification IEC 61984 Insertion strength per pos. approx. 11 N Withdraw strength per pos. approx. 10 N Polarization when inserted requirement >20 N Test passed 01/17/2020   Page 3 / 10 https://www.phoenixcontact.com/us/products/1766424 Feed-through header - GMSTBA 2,5/10-G - 1766424 Technical data Mechanical tests (A) Contact holder in insert requirements >20 N Test passed Durability tests (B) Specification IEC 60512-9-1:2010-03 Contact resistance R1 0.9 mΩ Insertion/withdrawal cycles 25 Contact resistance R2 0.9 mΩ Impulse withstand voltage at sea level 7.3 kV Power-frequency withstand voltage 3.31 kV Insulation resistance, neighboring positions > 30 GΩ Climatic tests (D) Specification ISO 6988:1985-02 Cold stress -40 °C/2 h Thermal stress 100 °C/168 h Corrosive stress 0.2 dm SO2 on 300 dm /40 °C/1 cycle Impulse withstand voltage at sea level 7.3 kV Power-frequency withstand voltage 3.31 kV 3 3 Environmental and durability tests (E) Specification IEC 61984:2008-10 Result, degree of protection, IP code Finger safety with IP20 test finger Vibration test Specification IEC 60068-2-6:2007-12 Result Test passed Frequency 10 - 150 - 10 Hz Sweep speed 1 octave/min Amplitude 0.35 mm (10 - 60.1 Hz) Acceleration 5 g (60.1 - 150 Hz) Test duration per axis 2.5 h Standards and Regulations Connection in acc. with standard EN-VDE CSA Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values 01/17/2020   Page 4 / 10 https://www.phoenixcontact.com/us/products/1766424 Feed-through header - GMSTBA 2,5/10-G - 1766424 Drawings Drilling diagram 01/17/2020   Page 5 / 10 https://www.phoenixcontact.com/us/products/1766424 Feed-through header - GMSTBA 2,5/10-G - 1766424 Diagram Type: GFKC 2,5/...-ST-7,5 with GMSTBA 2,5/...-G Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27260700 01/17/2020   Page 6 / 10 https://www.phoenixcontact.com/us/products/1766424 Feed-through header - GMSTBA 2,5/10-G - 1766424 Classifications eCl@ss eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700 eCl@ss 7.0 27440402 eCl@ss 8.0 27440402 eCl@ss 9.0 27440402 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002637 ETIM 5.0 EC002637 ETIM 6.0 EC002637 ETIM 7.0 EC002637 UNSPSC UNSPSC 6.01 30211810 UNSPSC 7.0901 39121409 UNSPSC 11 39121409 UNSPSC 12.01 39121409 UNSPSC 13.2 39121409 UNSPSC 18.0 39121409 UNSPSC 19.0 39121409 UNSPSC 20.0 39121409 UNSPSC 21.0 39121409 Approvals Approvals Approvals CSA / IECEE CB Scheme / EAC / cULus Recognized / VDE Zeichengenehmigung Ex Approvals Approval details 01/17/2020   Page 7 / 10 https://www.phoenixcontact.com/us/products/1766424 Feed-through header - GMSTBA 2,5/10-G - 1766424 Approvals CSA    http://www.csagroup.org/services-industries/product-listing/   B D Nominal voltage UN 300 V 300 V Nominal current IN 10 A 10 A IECEE CB Scheme    13631  http://www.iecee.org/     Nominal voltage UN 400 V Nominal current IN 12 A  DE1-60988-B1B2 EAC      B.01742 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-19931013   B D Nominal voltage UN 300 V 300 V Nominal current IN 15 A 10 A VDE Zeichengenehmigung    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 400 V Nominal current IN 12 A  40050648 Accessories Accessories Coding element 01/17/2020   Page 8 / 10 https://www.phoenixcontact.com/us/products/1766424 Feed-through header - GMSTBA 2,5/10-G - 1766424 Accessories Coding section - CR-MSTB - 1734401 Coding section, inserted into the recess in the header or the inverted plug, red insulating material     Filler plug Accessories - MSTB-BL - 1755477 Keying cap, for forming sections, plugs onto header pin, green insulating material     Labeled terminal marker Marker card - SK 7,5/3,8:FORTL.ZAHLEN - 0804455 Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: adhesive, for terminal block width: 7.5 mm, lettering field size: 7.5 x 3.8 mm     Additional products Printed-circuit board connector - GMVSTBR 2,5/10-ST - 1737783 PCB connector, nominal current: 12 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of positions: 10, pitch: 7.5 mm, connection method: Screw connection with tension sleeve, color: green, contact surface: Tin     01/17/2020   Page 9 / 10 https://www.phoenixcontact.com/us/products/1766424 Feed-through header - GMSTBA 2,5/10-G - 1766424 Accessories Printed-circuit board connector - GMVSTBW 2,5/10-ST - 1737893 PCB connector, nominal current: 12 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of positions: 10, pitch: 7.5 mm, connection method: Screw connection with tension sleeve, color: green, contact surface: Tin     Printed-circuit board connector - GMSTB 2,5/10-ST - 1766961 PCB connector, nominal current: 12 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of positions: 10, pitch: 7.5 mm, connection method: Screw connection with tension sleeve, color: green, contact surface: Tin     Printed-circuit board connector - GFKC 2,5/10-ST-7,5 - 1939497 PCB connector, nominal current: 12 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of positions: 10, pitch: 7.5 mm, connection method: Push-in spring connection, color: green, contact surface: Tin, COMBICON connectors may only be activated under no load conditions. If for operating reasons small loads must be switched, experimental values are available upon request.     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 01/17/2020   Page 10 / 10