1771529

https://www.phoenixcontact.com/us/products/1771529 PCB terminal block - MKDSFW 3/ 2 - 1771529 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, nominal current: 24 A, pitch: 5 mm, number of positions: 2, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 90 °, color: green. The article can be aligned to create different nos. of positions! Your advantages  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Stand-offs enable the PCB to be cleaned or sealed  Integrated protective guide prevents incorrect insertion of the conductor underneath the tension sleeve  The latching on the side enables various numbers of positions to be combined Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918036256 Weight per Piece (excluding packing) 4.320 g Custom tariff number 85369010 Country of origin Poland Technical data Item properties Brief article description PCB terminal block Range of articles MKDSFW 3 Pitch 5 mm 08/29/2019   Page 1 / 6 https://www.phoenixcontact.com/us/products/1771529 PCB terminal block - MKDSFW 3/ 2 - 1771529 Technical data Item properties Number of positions 2 Connection method Screw connection with tension sleeve Screw thread M3 Mounting type Wave soldering Pin layout Linear pinning Number of levels 1 Number of connections 2 Number of potentials 2 Electrical parameters Rated current 24 A Connection capacity Conductor cross section solid 0.2 mm² ... 4 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG / kcmil 24 ... 12 Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 1 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1 mm² 2 conductors with same cross section, solid 0.2 mm² ... 1.5 mm² 2 conductors with same cross section, flexible 0.2 mm² ... 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve 0.25 mm² ... 0.75 mm² 2 conductors with same cross section, stranded, with TWIN ferrules with plastic sleeve 0.5 mm² ... 1.5 mm² Stripping length 8 mm Torque 0.5 Nm ... 0.6 Nm Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Metal surface terminal point (top layer) Tin (5 - 7 µm Sn) Metal surface soldering area (top layer) Tin (5 - 7 µm Sn) Metal surface soldering area (middle layer) Nickel (2 - 3 µm Ni) Material data - housing Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V2 08/29/2019   Page 2 / 6 https://www.phoenixcontact.com/us/products/1771529 PCB terminal block - MKDSFW 3/ 2 - 1771529 Technical data Dimensions for the product Length [ l ] 20.5 mm Width [ w ] 10 mm Height [ h ] 16.7 mm Pitch 5 mm Height (without solder pin) 11.7 mm Solder pin [P] 5 mm Pin dimensions 0.9 x 0.9 mm Dimension a 5 mm Dimensions for PCB design Hole diameter 1.3 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. General product information Type of note Note on application Note For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). Processing notes Process Wave soldering Specification Following IEC 61760-1:2006-04 Following IEC 60068-2-54:2006-04 Electrical tests Rated current 24 A Conductor cross section 2.5 mm² Air clearances and creepage distances Rated insulation voltage (III/3) 250 V Standards and Regulations Connection in acc. with standard EN-VDE CSA Flammability rating according to UL 94 V2 Environmental Product Compliance 08/29/2019   Page 3 / 6 https://www.phoenixcontact.com/us/products/1771529 PCB terminal block - MKDSFW 3/ 2 - 1771529 Technical data Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Classifications eCl@ss eCl@ss 4.1 27141100 eCl@ss 5.1 27261100 eCl@ss 6.0 27261100 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 ETIM 6.0 EC002643 ETIM 7.0 EC002643 UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 Approvals Approvals Approvals CSA / EAC / cULus Recognized Ex Approvals 08/29/2019   Page 4 / 6 https://www.phoenixcontact.com/us/products/1771529 PCB terminal block - MKDSFW 3/ 2 - 1771529 Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/   B D Nominal voltage UN 300 V 300 V Nominal current IN 10 A 10 A mm²/AWG/kcmil 28-12 28-12  13631 EAC      B.01742 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-19870331   B D Nominal voltage UN 250 V 300 V Nominal current IN 16 A 10 A mm²/AWG/kcmil 30-12 30-12 Accessories Accessories Labeled terminal marker Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm     Screwdriver tools 08/29/2019   Page 5 / 6 https://www.phoenixcontact.com/us/products/1771529 PCB terminal block - MKDSFW 3/ 2 - 1771529 Accessories Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 08/29/2019   Page 6 / 6