1773170

https://www.phoenixcontact.com/us/products/1773170 PCB terminal block - FRONT 2,5-H/SA10/ 4 - 1773170 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, nominal current: 24 A, rated voltage (III/2): 400 V, nominal cross section: 2.5 mm², pitch: 5 mm, number of positions: 4, connection method: Front screw connection, mounting: Wave soldering, conductor/ PCB connection direction: 0 °, color: green, Pin layout: Linear double pinning, Solder pin [P]: 4.2 mm. The article can be aligned to create different nos. of positions! The figure shows the 10-position version Your advantages  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Operation and conductor connection from one direction enable integration into front of device  Two solder pins reduce the mechanical strain on the soldering spots  The latching on the side enables various numbers of positions to be combined Key Commercial Data Packing unit 1 pc Minimum order quantity 20 pc GTIN GTIN 4046356465724 Weight per Piece (excluding packing) 15.000 g Custom tariff number 85369010 Country of origin Germany Technical data Item properties Brief article description PCB terminal block Range of articles FRONT 2,5-H/SA10 01/17/2020   Page 1 / 8 https://www.phoenixcontact.com/us/products/1773170 PCB terminal block - FRONT 2,5-H/SA10/ 4 - 1773170 Technical data Item properties Pitch 5 mm Number of positions 4 Connection method Front screw connection Screw thread M2,5 Mounting type Wave soldering Pin layout Linear double pinning Number of levels 1 Number of connections 4 Number of potentials 4 Electrical parameters Nom. voltage 400 V Connection capacity Connection method Front screw connection pluggable Yes Conductor cross section solid 0.2 mm² ... 2.5 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG / kcmil 24 ... 14 Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm² 2 conductors with same cross section, solid 0.2 mm² ... 0.75 mm² 2 conductors with same cross section, flexible 0.2 mm² ... 0.75 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve 0.25 mm² ... 0.34 mm² Stripping length 9 mm Torque 0.4 Nm ... 0.5 Nm Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics hot-dip tin-plated Metal surface terminal point (top layer) Tin (5 - 7 µm Sn) Metal surface soldering area (top layer) Tin (5 - 7 µm Sn) Material data - housing Insulating material PA Insulating material group I CTI according to IEC 60112 600 01/17/2020   Page 2 / 8 https://www.phoenixcontact.com/us/products/1773170 PCB terminal block - FRONT 2,5-H/SA10/ 4 - 1773170 Technical data Material data - housing Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Dimensions for the product Caption Schematic representation – for additional information, see product range drawing in the Download Center Length [ l ] 18.5 mm Width [ w ] 22.5 mm Height [ h ] 22.7 mm Pitch 5 mm Height (without solder pin) 18.5 mm Solder pin [P] 4.2 mm Pin spacing 10 mm Pin dimensions 0.8 x 0.8 mm Dimension a 15 mm Dimensions for PCB design Hole diameter 1.2 mm Pin spacing 10 mm Packaging information Type of packaging packed in cardboard Pieces per package 20 Denomination packing units Pcs. Ambient conditions Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) Termination and connection method Test for conductor damage and slackening IEC 60999-1:1999-11 Test passed Pull-out test Pull-out test IEC 60999-1:1999-11 Test passed Conductor cross section / conductor type / tensile force 0.2 mm² / solid / > 10 N 01/17/2020   Page 3 / 8 https://www.phoenixcontact.com/us/products/1773170 PCB terminal block - FRONT 2,5-H/SA10/ 4 - 1773170 Technical data Pull-out test 0.2 mm² / flexible / > 10 N 2.5 mm² / flexible / > 50 N 2.5 mm² / solid / > 50 N Electrical tests Rated current 24 A Conductor cross section 2.5 mm² Rated voltage (III/2) 400 V Rated surge voltage (III/2) 4 kV Air clearances and creepage distances Clearances and creepage distances IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 Specification IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 Rated insulation voltage (III/3) 250 V Rated insulation voltage (III/2) 400 V Rated insulation voltage (II/2) 630 V Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Minimum clearance - inhomogeneous field (III/3) 3 mm Minimum clearance - inhomogeneous field (III/2) 3 mm Minimum clearance - inhomogeneous field (II/2) 3 mm Minimum creepage distance value (III/3) 3.2 mm Minimum creepage distance value (III/2) 3 mm Minimum creepage distance value (II/2) 3.2 mm Vibration test Specification IEC 60068-2-6:2007-12 Result Test passed Frequency 10 - 150 - 10 Hz Sweep speed 1 octave/min Amplitude 0.35 mm (10 - 60.1 Hz) Test duration per axis 2.5 h Standards and Regulations Connection in acc. with standard EN-VDE Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e 01/17/2020   Page 4 / 8 https://www.phoenixcontact.com/us/products/1773170 PCB terminal block - FRONT 2,5-H/SA10/ 4 - 1773170 Technical data Environmental Product Compliance No hazardous substances above threshold values Drawings Diagram Type: FRONT 2,5-H/SA 5/... Classifications eCl@ss eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27261100 eCl@ss 6.0 27261100 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 01/17/2020   Page 5 / 8 https://www.phoenixcontact.com/us/products/1773170 PCB terminal block - FRONT 2,5-H/SA10/ 4 - 1773170 Classifications ETIM ETIM 5.0 EC002643 ETIM 6.0 EC002643 ETIM 7.0 EC002643 UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 UNSPSC 18.0 39121432 UNSPSC 19.0 39121432 UNSPSC 20.0 39121432 UNSPSC 21.0 39121432 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC      B.01742 Accessories Accessories End cover 01/17/2020   Page 6 / 8 https://www.phoenixcontact.com/us/products/1773170 PCB terminal block - FRONT 2,5-H/SA10/ 4 - 1773170 Accessories End cover - D-FRONT 2,5-H-O.Z. - 1700024 End cover, necessary at the end of a terminal row, 2.5 mm thick, color: green     Labeled terminal marker Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm     Marker pen Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     Pitch spacer Pitch spacer - RZ 2,5-FRONT 2,5 H - 1700079 Pitch spacer, raises the pitch by 2.5 mm, interlocks with terminal block of the same shape, color: green     Screwdriver tools 01/17/2020   Page 7 / 8 https://www.phoenixcontact.com/us/products/1773170 PCB terminal block - FRONT 2,5-H/SA10/ 4 - 1773170 Accessories Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Marker card - SK U/3,8 WH:UNBEDRUCKT - 0803906 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm, Number of individual labels: 1440     Marker card - SK 5/3,8:UNBEDRUCKT - 0805409 Marker card, Card, white, unlabeled, can be labeled with: Marker pen, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 01/17/2020   Page 8 / 8