1775758

https://www.phoenixcontact.com/us/products/1775758 Contact insert - HC-D 8-ESTC - 1775758 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON male insert, D8 series, 8-pos., crimp connection, with IP65 sealing screw Key Commercial Data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 11.83 g Custom tariff number 85366990 Country of origin Germany Technical data General Note For HC-D8 housing, crimp contacts CK1,6-ED (crimp contacts not included in scope of supply) Connection method Crimp connection Degree of pollution 3 Overvoltage category III Constructional and testing regulations DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60664-1, DIN IEC 60512 IEC 60352 Number of positions 8 Insertion/withdrawal cycles ≥ 500 Size D8 04/27/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/1775758 Contact insert - HC-D 8-ESTC - 1775758 Technical data General Connection in acc. with standard IEC / EN Conductor cross section 0.14 mm² ... 2.5 mm² Connection cross section AWG 26 ... 14 Stripping length of the individual wire 8 mm 6 mm (for cross section 2.5 mm²) Assembly instructions Connectors may be operated only when there is no load/voltage. Connection The inserts may only be used in plastic housings at voltages >42 V, since it is not possible to connect the protective conductor and the housing with each other. Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C (including heating up of contacts) Material data Flammability rating according to UL 94 V0 Contact material Copper alloy Contact surface material Ag (alternatively Au) Contact carrier material PA Electrical characteristics Rated voltage (III/3) 50 V Rated surge voltage 0.8 kV Rated current 10 A Standards and Regulations Connection in acc. with standard IEC / EN CSA Constructional and testing regulations DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60664-1, DIN IEC 60512 IEC 60352 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27140816 eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 04/27/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/1775758 Contact insert - HC-D 8-ESTC - 1775758 Classifications eCl@ss eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440205 eCl@ss 9.0 27440205 ETIM ETIM 2.0 EC000438 ETIM 3.0 EC000438 ETIM 4.0 EC000438 ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals CSA / EAC Ex Approvals Approvals submitted Approval details 04/27/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/1775758 Contact insert - HC-D 8-ESTC - 1775758 Approvals CSA      mm²/AWG/kcmil 22-16 Nominal current IN 10 A Nominal voltage UN 300 V EAC  Drawings Schematic diagram Diagram 6 5 4 1 Operating current [A] 10 7 7 8 2 3 8 2 3 1 6 5 4 D15 D7/D8 D7/D8 D40 8 D25 6 D64 D40 D64 4 2 0 D40 D64 2 1 = 0,5 mm 2 2 = 1,5 mm 0 1 20 40 60 80 100 120 0 2 20 40 60 80 100 120 Ambient temperature [°C] Dimensional drawing 30,2 21 Male insert (turned contacts) Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/27/2016   Page 4 / 4