1790182

https://www.phoenixcontact.com/us/products/1790182 Printed-circuit board connector - DFMC 1,5/10-ST-3,5 - 1790182 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug, nominal current: 8 A, rated voltage (III/2): 160 V, number of positions: 10 with 20 contacts, pitch: 3.5 mm, connection method: spring-cage connection, color: green, contact surface: tin The figure shows a 10-pos. version with 20 contacts Your advantages  Time saving push-in connection, tools not required  Defined contact force ensures that contact remains stable over the long term  Intuitive use through colour coded actuation lever  Optimized for tight installation situations: operation and conductor connection from one direction Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356594332 Weight per Piece (excluding packing) 10.400 g Custom tariff number 85366990 Country of origin Germany Technical data Item properties Brief article description PCB connector Plug-in system MINI COMBICON - DFMC 1,5 Type of contact Female connector Range of articles DFMC 1,5/..-ST 06/15/2020   Page 1 / 12 https://www.phoenixcontact.com/us/products/1790182 Printed-circuit board connector - DFMC 1,5/10-ST-3,5 - 1790182 Technical data Item properties Pitch 3.5 mm Number of positions 10 Connection method Push-in spring connection Locking without Number of levels 2 Number of connections 20 Number of potentials 20 Electrical parameters Nominal current 8A Nom. voltage 160 V Rated voltage 160 V Rated voltage (III/2) 160 V Rated voltage (II/2) 320 V Rated surge voltage (III/3) 2.5 kV Rated surge voltage (III/2) 2.5 kV Rated surge voltage (II/2) 2.5 kV Connection capacity Connection method Push-in spring connection pluggable Yes Conductor cross section solid 0.2 mm² ... 1.5 mm² Conductor cross section flexible 0.2 mm² ... 1.5 mm² Conductor cross section AWG / kcmil 24 ... 16 Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 0.14 mm² ... 0.75 mm² Stripping length 10 mm Specifications for ferrules Recommended crimping pliers 1212034 CRIMPFOX 6 Ferrules without insulating collar, according to DIN 46228‑1 Cross section: 0.25 mm²; Length: 7 mm Cross section: 0.34 mm²; Length: 7 mm Cross section: 0.5 mm²; Length: 8 mm ... 10 mm Cross section: 0.75 mm²; Length: 8 mm ... 10 mm Cross section: 1 mm²; Length: 8 mm ... 10 mm Cross section: 1.5 mm²; Length: 10 mm Recommended crimping pliers 1212034 CRIMPFOX 6 Ferrules with insulating collar, according to DIN 46228‑4 Cross section: 0.14 mm²; Length: 8 mm Cross section: 0.25 mm²; Length: 8 mm ... 10 mm 06/15/2020   Page 2 / 12 https://www.phoenixcontact.com/us/products/1790182 Printed-circuit board connector - DFMC 1,5/10-ST-3,5 - 1790182 Technical data Specifications for ferrules Cross section: 0.34 mm²; Length: 8 mm ... 10 mm Cross section: 0.5 mm²; Length: 8 mm ... 10 mm Cross section: 0.75 mm²; Length: 10 mm Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics hot-dip tin-plated Metal surface terminal point (top layer) Tin (4 - 8 µm Sn) Metal surface contact area (top layer) Tin (4 - 8 µm Sn) Material data - housing Housing color green (6021) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Material data – actuating element Insulating material PBT CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Dimensions for the product Length [ l ] 23.35 mm Width [ w ] 35.8 mm Height [ h ] 13.25 mm Pitch 3.5 mm Height (without solder pin) 13.25 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. Ambient conditions Ambient temperature (storage/transport) -40 °C ... 70 °C 06/15/2020   Page 3 / 12 https://www.phoenixcontact.com/us/products/1790182 Printed-circuit board connector - DFMC 1,5/10-ST-3,5 - 1790182 Technical data Ambient conditions Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve) Termination and connection method Conductor connection test The stripped-off ends of the largest conductor can be completely inserted in the opening of the terminal point without using excessive force. Test result Test passed Test – repeated connection and release IEC 60999-1:1999-11 Test passed Test for conductor damage and slackening IEC 60999-1:1999-11 Test passed Pull-out test Pull-out test IEC 60999-1:1999-11 Test passed Conductor cross section / conductor type / tensile force 0.2 mm² / solid / > 10 N 0.2 mm² / flexible / > 10 N 1.5 mm² / solid / > 40 N 1.5 mm² / flexible / > 40 N Mechanical tests according to standard Test specification IEC 61984 Visual examination Test passed IEC 60512-1-1:2002-02 Dimensional test Test passed IEC 60512-1-2:2002-02 Resistance of marking Test passed IEC 60068-2-70:1995-12 Result Test passed Specification IEC 60512-13-2:2006-02 No. of cycles 25 Insertion strength per pos. approx. 3N Withdraw strength per pos. approx. 2N Polarization and coding Test passed IEC 60512-13-5:2006-02 Result Test passed Specification IEC 60512-15-1:2008-05 Test force per pos. 30 N Air clearances and creepage distances Clearances and creepage distances IEC 60664-1:2007-04 Specification IEC 60664-1:2007-04 Minimum clearance - inhomogeneous field (III/3) 1.5 mm Minimum clearance - inhomogeneous field (III/2) 1.5 mm 06/15/2020   Page 4 / 12 https://www.phoenixcontact.com/us/products/1790182 Printed-circuit board connector - DFMC 1,5/10-ST-3,5 - 1790182 Technical data Air clearances and creepage distances Minimum clearance - inhomogeneous field (II/2) 1.5 mm Minimum creepage distance value (III/3) 2 mm Minimum creepage distance value (III/2) 0.8 mm Minimum creepage distance value (II/2) 1.6 mm Electrical tests - Function Specification IEC 60999-1:1999-11 Temperature cycles Specification IEC 60999-1:1999-11 Test current (minimum cross section) 4 A DC Test current (maximum cross section) 8 A DC Temperature cycles 192 Current carrying capacity / derating curves Specification IEC 61984 Mechanical tests (A) Test specification IEC 61984 Insertion strength per pos. approx. 3N Withdraw strength per pos. approx. 2N Polarization when inserted requirement >20 N Test passed Contact holder in insert requirements >20 N Test passed Durability tests (B) Specification IEC 60512-9-1:2010-03 Contact resistance R1 2 mΩ Insertion/withdrawal cycles 25 Contact resistance R2 2.3 mΩ Impulse withstand voltage at sea level 2.95 kV Power-frequency withstand voltage 1.39 kV Insulation resistance, neighboring positions > 12 TΩ Climatic tests (D) Specification ISO 6988:1985-02 Cold stress -40 °C/2 h Thermal stress 100 °C/168 h Corrosive stress 0.2 dm SO2 on 300 dm /40 °C/1 cycle Impulse withstand voltage at sea level 2.95 kV Power-frequency withstand voltage 1.39 kV 3 3 06/15/2020   Page 5 / 12 https://www.phoenixcontact.com/us/products/1790182 Printed-circuit board connector - DFMC 1,5/10-ST-3,5 - 1790182 Technical data Environmental and durability tests (E) Specification IEC 61984:2008-10 Result, degree of protection, IP code Finger safety with IP20 test finger Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Diagram Type: DFMC 1,5/...-ST-3,5 with DMC 1,5/...-G1-3,5 P20 THR 06/15/2020   Page 6 / 12 https://www.phoenixcontact.com/us/products/1790182 Printed-circuit board connector - DFMC 1,5/10-ST-3,5 - 1790182 Diagram Typ: DFMC 1,5/..-ST-3,5 with DMCV 1,5/..-G1-3,5 P20 THR Dimensional drawing 06/15/2020   Page 7 / 12 https://www.phoenixcontact.com/us/products/1790182 Printed-circuit board connector - DFMC 1,5/10-ST-3,5 - 1790182 Schematic diagram Use of the CP-DMC... coding profile Classifications eCl@ss eCl@ss 10.0.1 27440309 eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700 eCl@ss 7.0 27440309 eCl@ss 8.0 27440309 eCl@ss 9.0 27440309 ETIM ETIM 4.0 EC002638 ETIM 5.0 EC002638 ETIM 6.0 EC002638 06/15/2020   Page 8 / 12 https://www.phoenixcontact.com/us/products/1790182 Printed-circuit board connector - DFMC 1,5/10-ST-3,5 - 1790182 Classifications ETIM ETIM 7.0 EC002638 UNSPSC UNSPSC 6.01 30211810 UNSPSC 7.0901 39121409 UNSPSC 11 39121409 UNSPSC 12.01 39121409 UNSPSC 13.2 39121409 UNSPSC 18.0 39121409 UNSPSC 19.0 39121409 UNSPSC 20.0 39121409 UNSPSC 21.0 39121409 Approvals Approvals Approvals IECEE CB Scheme / VDE Gutachten mit Fertigungsüberwachung / EAC / cULus Recognized Ex Approvals Approval details IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 160 V Nominal current IN 8A VDE Gutachten mit Fertigungsüberwachung    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 160 V Nominal current IN 8A  DE1-60359_B1_B2  40038423 06/15/2020   Page 9 / 12 https://www.phoenixcontact.com/us/products/1790182 Printed-circuit board connector - DFMC 1,5/10-ST-3,5 - 1790182 Approvals     mm²/AWG/kcmil 0.2-1.5 EAC      B.01687 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-19920306   B C D Nominal voltage UN 300 V 50 V 300 V Nominal current IN 8A 8A 8A mm²/AWG/kcmil 24-16 24-16 24-16 Accessories Accessories Coding element Coding profile - CP-DMC 1,5 NAT - 1790647 Coding profile, for insertion between the coding ribs of the connector and the header following the reflow soldering process, insulating material, color: natural     Crimping tool Crimping pliers - CRIMPFOX 6 - 1212034 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp     Screwdriver tools 06/15/2020   Page 10 / 12 https://www.phoenixcontact.com/us/products/1790182 Printed-circuit board connector - DFMC 1,5/10-ST-3,5 - 1790182 Accessories Screwdriver - SZS 0,4X2,5 VDE - 1205037 Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip     Additional products Printed-circuit board connector - DMC 1,5/10-G1-3,5 P20THR - 1786918 PCB headers, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm², number of positions: 10, pitch: 3.5 mm, color: black, contact surface: Tin, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2 mm     Printed-circuit board connector - DMCV 1,5/10-G1-3,5 P20THR - 1787289 PCB headers, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm², number of positions: 10, pitch: 3.5 mm, color: black, contact surface: Tin, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2 mm     Printed-circuit board connector - DMC 1,5/10-G1-3,5 P20THR R56 - 1816182 PCB headers, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm², number of positions: 10, pitch: 3.5 mm, color: black, contact surface: Tin, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2 mm     Printed-circuit board connector - DMCV 1,5/10-G1-3,5 P20THR R56 - 1818656 PCB headers, nominal current: 8 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm², number of positions: 10, pitch: 3.5 mm, color: black, contact surface: Tin, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2 mm     06/15/2020   Page 11 / 12 https://www.phoenixcontact.com/us/products/1790182 Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 06/15/2020   Page 12 / 12