https://www.phoenixcontact.com/us/products/1792809
Printed-circuit board connector - MVSTBW 2,5/ 7-ST-5,08 - 1792809
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Plug component, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm,
connection method: Screw connection with tension sleeve, color: green, contact surface: Tin
The figure shows a 10-position
version of the product
Why buy this product
Well-known connection principle allows worldwide use
Allows connection of two conductors
Low temperature rise, thanks to maximum contact force
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4017918045234
Weight per Piece (excluding packing)
14.400 g
Custom tariff number
85366990
Country of origin
Germany
Technical data
Dimensions
Length [ l ]
26 mm
Width [ w ]
35.56 mm
Height [ h ]
12.5 mm
Pitch
5.08 mm
Dimension a
30.48 mm
01/05/2018 Page 1 / 13
https://www.phoenixcontact.com/us/products/1792809
Printed-circuit board connector - MVSTBW 2,5/ 7-ST-5,08 - 1792809
Technical data
General
Range of articles
MVSTBW 2,5/..-ST
Type of contact
Female connector
Number of positions
7
Connection method
Screw connection with tension sleeve
Insulating material group
I
Rated surge voltage (III/3)
4 kV
Rated surge voltage (III/2)
4 kV
Rated surge voltage (II/2)
4 kV
Rated voltage (III/3)
250 V
Rated voltage (III/2)
320 V
Rated voltage (II/2)
630 V
Connection in acc. with standard
EN-VDE
Nominal current IN
12 A
Nominal cross section
2.5 mm²
Maximum load current
12 A
Insulating material
PA
Flammability rating according to UL 94
V0
Internal cylindrical gage
A3
Stripping length
7 mm
Screw thread
M3
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
01/05/2018 Page 2 / 13
https://www.phoenixcontact.com/us/products/1792809
Printed-circuit board connector - MVSTBW 2,5/ 7-ST-5,08 - 1792809
Technical data
Connection data
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
1.5 mm²
sleeve, max.
Minimum AWG according to UL/CUL
30
Maximum AWG according to UL/CUL
12
Standards and Regulations
Connection in acc. with standard
EN-VDE
CSA
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Dimensional drawing
12,6
8,3
26
a+5,08
2,54
5,08
a
Classifications
eCl@ss
eCl@ss 4.0
272607xx
eCl@ss 4.1
27260701
eCl@ss 5.0
27260701
eCl@ss 5.1
27260701
eCl@ss 6.0
27260704
01/05/2018 Page 3 / 13
https://www.phoenixcontact.com/us/products/1792809
Printed-circuit board connector - MVSTBW 2,5/ 7-ST-5,08 - 1792809
Classifications
eCl@ss
eCl@ss 7.0
27440402
eCl@ss 8.0
27440309
eCl@ss 9.0
27440309
ETIM
ETIM 3.0
EC001121
ETIM 4.0
EC002638
ETIM 5.0
EC002638
ETIM 6.0
EC002638
UNSPSC
UNSPSC 6.01
30211810
UNSPSC 7.0901
39121409
UNSPSC 11
39121409
UNSPSC 12.01
39121409
UNSPSC 13.2
39121409
Approvals
Approvals
Approvals
VDE Gutachten mit Fertigungsüberwachung / IECEE CB Scheme / CSA / EAC / cULus Recognized
Ex Approvals
Approval details
VDE Gutachten mit
Fertigungsüberwachung
http://www.vde.com/en/Institute/OnlineService/
VDE-approved-products/Pages/Online-Search.aspx
mm²/AWG/kcmil
0.2-2.5
Nominal current IN
12 A
Nominal voltage UN
250 V
40004701
01/05/2018 Page 4 / 13
https://www.phoenixcontact.com/us/products/1792809
Printed-circuit board connector - MVSTBW 2,5/ 7-ST-5,08 - 1792809
Approvals
IECEE CB Scheme
http://www.iecee.org/
mm²/AWG/kcmil
0.2-2.5
Nominal current IN
12 A
Nominal voltage UN
250 V
CSA
DE1-58978-B1B2
http://www.csagroup.org/services-industries/product-listing/
B
D
mm²/AWG/kcmil
28-12
28-12
Nominal current IN
10 A
10 A
Nominal voltage UN
300 V
300 V
2585950
EAC
B.01742
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
E60425-19931011
B
D
mm²/AWG/kcmil
30-12
30-12
Nominal current IN
15 A
10 A
Nominal voltage UN
300 V
300 V
Accessories
Accessories
Coding element
Coding profile - CP-MSTB - 1734634
Coding profile, is inserted into the slot on the plug or inverted header, red insulating material
01/05/2018 Page 5 / 13
https://www.phoenixcontact.com/us/products/1792809
Printed-circuit board connector - MVSTBW 2,5/ 7-ST-5,08 - 1792809
Accessories
Labeled terminal marker
Marker card - SK 5,08/3,8:FORTL.ZAHLEN - 0804293
Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, mounting
type: adhesive, for terminal block width: 5.08 mm, lettering field size: 5.08 x 3.8 mm
Marker pen
Marker pen - B-STIFT - 1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Terminal marking
Marker card - SK 5,08/3,8:UNBEDRUCKT - 0805412
Marker card, Card, white, unlabeled, can be labeled with: Marker pen, mounting type: adhesive, for terminal block width:
5.08 mm, lettering field size: 5.08 x 3.8 mm
Additional products
01/05/2018 Page 6 / 13
https://www.phoenixcontact.com/us/products/1792809
Printed-circuit board connector - MVSTBW 2,5/ 7-ST-5,08 - 1792809
Accessories
Base strip - MSTBW 2,5/ 7-G-5,08 - 1735837
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering
Printed-circuit board connector - MSTBVA 2,5/ 7-G-5,08 - 1755781
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering
Printed-circuit board connector - MSTBA 2,5/ 7-G-5,08 - 1757297
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering
Base strip - MSTBV 2,5/ 7-G-5,08 - 1758063
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering
Base strip - MSTB 2,5/ 7-G-5,08 - 1759062
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering
01/05/2018 Page 7 / 13
https://www.phoenixcontact.com/us/products/1792809
Printed-circuit board connector - MVSTBW 2,5/ 7-ST-5,08 - 1792809
Accessories
Base strip - MDSTB 2,5/ 7-G1-5,08 - 1762428
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering, In combination with MVSTB or FKCV plug components, both an MVSTBW (or
FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!
Base strip - MDSTBV 2,5/ 7-G1-5,08 - 1762554
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering, In combination with MVSTB or FKCV plug components, both an MVSTBW (or
FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!
Base strip - SMSTBA 2,5/ 7-G-5,08 - 1767423
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering
Printed-circuit board connector - SMSTB 2,5/ 7-G-5,08 - 1769515
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering
Base strip - MSTBA 2,5/ 7-G-5,08-LA - 1770999
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering
01/05/2018 Page 8 / 13
https://www.phoenixcontact.com/us/products/1792809
Printed-circuit board connector - MVSTBW 2,5/ 7-ST-5,08 - 1792809
Accessories
Base strip - MDSTBA 2,5/ 7-G-5,08 - 1842115
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering, The article can be aligned to create different nos. of positions! In combination
with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be
used. Combination with TMSTBP plug components is not possible!
Base strip - MDSTBW 2,5/ 7-G-5,08 - 1842267
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering, The article can be aligned to create different nos. of positions! In combination
with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be
used. Combination with TMSTBP plug components is not possible!
Housing - MDSTB 2,5/ 7-G-5,08 - 1842568
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering, Can be aligned! Mounting flange: Order No. 1736771, 1736768. In combination
with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be
used. Combination with TMSTBP plug components is not possible!
Base strip - MDSTBVA 2,5/ 7-G-5,08 - 1845387
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering, The article can be aligned to create different nos. of positions! In combination
with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be
used. Combination with TMSTBP plug components is not possible!
Printed-circuit board connector - MDSTBV 2,5/ 7-G-5,08 - 1845536
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering, Can be aligned! Mounting flange: Order No. 1836477, 1836480. In combination
with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be
used. Combination with TMSTBP plug components is not possible!
01/05/2018 Page 9 / 13
https://www.phoenixcontact.com/us/products/1792809
Printed-circuit board connector - MVSTBW 2,5/ 7-ST-5,08 - 1792809
Accessories
Base strip - MSTBO 2,5/ 7-GR-5,08 - 1847152
Header, nominal current: 8 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering
Base strip - MSTBO 2,5/ 7-GL-5,08 - 1850482
Header, nominal current: 8 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering
Base strip - EMSTBVA 2,5/ 7-G-5,08 - 1859564
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Press-in technology
Base strip - EMSTBA 2,5/ 7-G-5,08 - 1880355
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Press-in technology
Printed-circuit board connector - DFK-MSTBA 2,5/ 7-G-5,08 - 1898884
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering
01/05/2018 Page 10 / 13
https://www.phoenixcontact.com/us/products/1792809
Printed-circuit board connector - MVSTBW 2,5/ 7-ST-5,08 - 1792809
Accessories
Printed-circuit board connector - DFK-MSTBVA 2,5/ 7-G-5,08 - 1899184
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: green, contact
surface: Tin, mounting: Wave soldering
Printed-circuit board connector - MSTBA 2,5/ 7-G-5,08 THT - 1902796
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: black, contact
surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow technology
can be found under “Downloads”
Base strip - MSTBVA 2,5/ 7-G-5,08 THT - 1902864
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: black, contact
surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow technology
can be found under “Downloads”
Printed-circuit board connector - CC 2,5/ 7-G-5,08 P26THR - 1954524
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: black, contact
surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow technology
can be found under “Downloads”
Printed-circuit board connector - CC 2,5/ 7-G-5,08 P26THRR56 - 1954634
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: black, contact
surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow technology
can be found under “Downloads”
01/05/2018 Page 11 / 13
https://www.phoenixcontact.com/us/products/1792809
Printed-circuit board connector - MVSTBW 2,5/ 7-ST-5,08 - 1792809
Accessories
Printed-circuit board connector - CCA 2,5/ 7-G-5,08 P26THR - 1954977
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: black, contact
surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow technology
can be found under “Downloads”
Printed-circuit board connector - CCA 2,5/ 7-G-5,08 P26THRR56 - 1955086
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: black, contact
surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow technology
can be found under “Downloads”
Printed-circuit board connector - CCV 2,5/ 7-G-5,08 P26THR - 1955468
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: black, contact
surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow technology
can be found under “Downloads”
Printed-circuit board connector - CCV 2,5/ 7-G-5,08 P26THRR56 - 1955578
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: black, contact
surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow technology
can be found under “Downloads”
Printed-circuit board connector - CCVA 2,5/ 7-G-5,08 P26THR - 1955905
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: black, contact
surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow technology
can be found under “Downloads”
01/05/2018 Page 12 / 13
https://www.phoenixcontact.com/us/products/1792809
Printed-circuit board connector - MVSTBW 2,5/ 7-ST-5,08 - 1792809
Accessories
Printed-circuit board connector - CCVA 2,5/ 7-G-5,08 P26THRR56 - 1956014
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: black, contact
surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow technology
can be found under “Downloads”
Printed-circuit board connector - CCA 2,5/ 7-GL-5,08P26THRR56 - 1959189
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: black, contact
surface: Tin, mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a right (R)
segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CCVA 2,5/ 7-GL-5,08P26THR - 1959956
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: black, contact
surface: Tin, mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a right (R)
segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CCVA 2,5/ 7-GR-5,08P26THR - 1960136
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 7, pitch: 5.08 mm, color: black, contact
surface: Tin, mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a right (R)
segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
01/05/2018 Page 13 / 13