1792812

https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug component, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Connection method: Screw connection with tension sleeve, Color: green, Contact surface: Tin The figure shows a 10-position version of the product Why buy this product  Well-known connection principle allows worldwide use  90° difference in plug-in direction for the conductor connection, reduces the risk of the connector being pulled out with the conductor and narrower conductor routing to the application  Allows connection of two conductors Key Commercial Data Packing unit 50 STK GTIN GTIN 4017918045241 Weight per Piece (excluding packing) 16.560 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Width 40.64 mm Pitch 5.08 mm Dimension a 35.56 mm General Range of articles MVSTBW 2,5/..-ST Type of contact Female connector Number of positions 8 Connection method Screw connection with tension sleeve 12/23/2016   Page 1 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Technical data General Insulating material group I Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/3) 250 V Rated voltage (III/2) 320 V Rated voltage (II/2) 630 V Connection in acc. with standard EN-VDE Nominal current IN 12 A Nominal cross section 2.5 mm² Maximum load current 12 A Insulating material PA Flammability rating according to UL 94 V0 Internal cylindrical gage A3 Stripping length 7 mm Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. 0.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. 1.5 mm² 12/23/2016   Page 2 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Technical data Connection data Minimum AWG according to UL/CUL 30 Maximum AWG according to UL/CUL 12 Standards and Regulations Connection in acc. with standard EN-VDE CSA Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing 12,6 8,3 26 a+5,08 2,54 5,08 a Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27260701 eCl@ss 5.1 27260701 eCl@ss 6.0 27260704 eCl@ss 7.0 27440402 eCl@ss 8.0 27440309 eCl@ss 9.0 27440309 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002638 ETIM 5.0 EC002638 ETIM 6.0 EC002638 12/23/2016   Page 3 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Classifications UNSPSC UNSPSC 6.01 30211810 UNSPSC 7.0901 39121409 UNSPSC 11 39121409 UNSPSC 12.01 39121409 UNSPSC 13.2 39121409 Approvals Approvals Approvals UL Recognized / VDE Gutachten mit Fertigungsüberwachung / cUL Recognized / IECEE CB Scheme / CSA / EAC / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B D mm²/AWG/kcmil 30-12 30-12 Nominal current IN 15 A 10 A Nominal voltage UN 300 V 300 V VDE Gutachten mit Fertigungsüberwachung    http://www.vde.com/en/Institute/OnlineService/ VDE-approved-products/Pages/Online-Search.aspx     mm²/AWG/kcmil 0.2-2.5 Nominal current IN 12 A Nominal voltage UN 250 V cUL Recognized    40004701  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B D mm²/AWG/kcmil 30-12 30-12 Nominal current IN 15 A 10 A Nominal voltage UN 300 V 300 V  FILE E 60425  FILE E 60425 12/23/2016   Page 4 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Approvals IECEE CB Scheme    http://www.iecee.org/     mm²/AWG/kcmil 0.2-2.5 Nominal current IN 12 A Nominal voltage UN 250 V CSA    DE1-56062-B1B2  http://www.csagroup.org/services/testingand-certification/certified-product-listing/   B D mm²/AWG/kcmil 28-12 28-12 Nominal current IN 10 A 10 A Nominal voltage UN 300 V 300 V  13631 EAC      B.01742 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Coding element Coding star - CR-MSTB - 1734401 Coding section, inserted into the recess in the header or the inverted plug, red insulating material     Coding profile - CP-MSTB - 1734634 Coding profile, is inserted into the slot on the plug or inverted header, red insulating material     12/23/2016   Page 5 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Accessories Labeled terminal marker Marker card - SK 5,08/3,8:FORTL.ZAHLEN - 0804293 Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting type: Adhesive, for terminal block width: 5.08 mm, Lettering field: 5.08 x 3.8 mm     Marker pen Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Marker card - SK 5,08/3,8:UNBEDRUCKT - 0805412 Marker card, Card, white, unlabeled, can be labeled with: Marker pen, Mounting type: Adhesive, for terminal block width: 5.08 mm, Lettering field: 5.08 x 3.8 mm     Additional products 12/23/2016   Page 6 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Accessories Base strip - MSTBW 2,5/ 8-G-5,08 - 1735824 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering     Base strip - MSTBVA 2,5/ 8-G-5,08 - 1755794 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering     Base strip - MSTBA 2,5/ 8-G-5,08 - 1757307 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering     Base strip - MSTBV 2,5/ 8-G-5,08 - 1758076 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering     Base strip - MSTB 2,5/ 8-G-5,08 - 1759075 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering     12/23/2016   Page 7 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Accessories Base strip - MDSTB 2,5/ 8-G1-5,08 - 1762431 Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering, In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!     Base strip - MDSTBV 2,5/ 8-G1-5,08 - 1762567 Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering, In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!     Base strip - SMSTBA 2,5/ 8-G-5,08 - 1767436 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering     Base strip - SMSTB 2,5/ 8-G-5,08 - 1769528 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering     Base strip - MSTBA 2,5/ 8-G-5,08-LA - 1771008 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering     12/23/2016   Page 8 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Accessories Base strip - MSTBV 2,5/ 8-GEH-5,08 - 1808528 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering     Base strip - MDSTB 2,5/ 8-G-5,08 - 1840052 Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering, Can be aligned! Mounting flange: Order No. 1736771, 1736768. In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!     Base strip - MDSTBA 2,5/ 8-G-5,08 - 1842128 Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering, The article can be aligned to create different nos. of positions! In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!     Base strip - MDSTBW 2,5/ 8-G-5,08 - 1842270 Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering, The article can be aligned to create different nos. of positions! In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!     Base strip - MDSTBVA 2,5/ 8-G-5,08 - 1845390 Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering, The article can be aligned to create different nos. of positions! In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!     12/23/2016   Page 9 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Accessories Base strip - MDSTBV 2,5/ 8-G-5,08 - 1845549 Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering, Can be aligned! Mounting flange: Order No. 1836477, 1836480. In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!     Base strip - MSTBO 2,5/ 8-GR-5,08 - 1847165 Header, Nominal current: 8 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering     Base strip - MSTBO 2,5/ 8-GL-5,08 - 1850495 Header, Nominal current: 8 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering     Base strip - EMSTBVA 2,5/ 8-G-5,08 - 1859577 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Press-in technology     Base strip - EMSTBA 2,5/ 8-G-5,08 - 1880368 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Press-in technology     12/23/2016   Page 10 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Accessories Base strip - DFK-MSTBA 2,5/ 8-G-5,08 - 1898897 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering     Base strip - DFK-MSTBVA 2,5/ 8-G-5,08 - 1899197 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: green, Contact surface: Tin, Mounting: Wave soldering     Printed-circuit board connector - MSTBA 2,5/ 8-G-5,08 THT - 1902806 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”     Base strip - MSTBVA 2,5/ 8-G-5,08 THT - 1902877 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”     Printed-circuit board connector - MSTBA 2,5/ 8-G-5,08 THT-R56 - 1937295 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”     12/23/2016   Page 11 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Accessories Base strip - MSTBVA 2,5/ 8-G-5,08 THT-R56 - 1940473 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”     Printed-circuit board connector - CC 2,5/ 8-G-5,08 P26THR - 1954537 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”     Printed-circuit board connector - CC 2,5/ 8-G-5,08 P26THRR56 - 1954647 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”     Printed-circuit board connector - CCA 2,5/ 8-G-5,08 P26THR - 1954980 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”     Printed-circuit board connector - CCA 2,5/ 8-G-5,08 P26THRR56 - 1955099 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”     12/23/2016   Page 12 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Accessories Printed-circuit board connector - CCV 2,5/ 8-G-5,08 P26THR - 1955471 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”     Printed-circuit board connector - CCV 2,5/ 8-G-5,08 P26THRR56 - 1955581 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”     Printed-circuit board connector - CCVA 2,5/ 8-G-5,08 P26THR - 1955918 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”     Printed-circuit board connector - CCVA 2,5/ 8-G-5,08 P26THRR56 - 1956027 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”     Printed-circuit board connector - CCA 2,5/ 8-GL-5,08P26THR - 1959121 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.     12/23/2016   Page 13 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Accessories Printed-circuit board connector - CCA 2,5/ 8-GL-5,08P26THRR56 - 1959192 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.     Printed-circuit board connector - CCA 2,5/ 8-GR-5,08P26THR - 1959260 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.     Printed-circuit board connector - CCA 2,5/ 8-GR-5,08P26THRR56 - 1959338 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.     Printed-circuit board connector - CCVA 2,5/ 8-GL-5,08P26THR - 1959969 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.     Printed-circuit board connector - CCVA 2,5/ 8-GL-5,08P26THRR56 - 1960068 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.     12/23/2016   Page 14 / 15 https://www.phoenixcontact.com/gb/products/1792812 Printed-circuit board connector - MVSTBW 2,5/ 8-ST-5,08 - 1792812 Accessories Printed-circuit board connector - CCVA 2,5/ 8-GR-5,08P26THR - 1960149 Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 8, Pitch: 5.08 mm, Color: black, Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/23/2016   Page 15 / 15