https://www.phoenixcontact.com/gb/products/1792825
Printed-circuit board connector - MVSTBW 2,5/ 9-ST-5,08 - 1792825
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Plug component, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm,
Connection method: Screw connection with tension sleeve, Color: green, Contact surface: Tin
The figure shows a 10-position
version of the product
Why buy this product
Well-known connection principle allows worldwide use
90° difference in plug-in direction for the conductor connection, reduces the risk of the connector being pulled out with the conductor and
narrower conductor routing to the application
Allows connection of two conductors
Key Commercial Data
Packing unit
50 STK
GTIN
GTIN
4017918045258
Weight per Piece (excluding packing)
18.330 g
Custom tariff number
85366990
Country of origin
Germany
Technical data
Dimensions
Width
45.72 mm
Pitch
5.08 mm
Dimension a
40.64 mm
General
Range of articles
MVSTBW 2,5/..-ST
Type of contact
Female connector
Number of positions
9
Connection method
Screw connection with tension sleeve
12/23/2016 Page 1 / 13
https://www.phoenixcontact.com/gb/products/1792825
Printed-circuit board connector - MVSTBW 2,5/ 9-ST-5,08 - 1792825
Technical data
General
Insulating material group
I
Rated surge voltage (III/3)
4 kV
Rated surge voltage (III/2)
4 kV
Rated surge voltage (II/2)
4 kV
Rated voltage (III/3)
250 V
Rated voltage (III/2)
320 V
Rated voltage (II/2)
630 V
Connection in acc. with standard
EN-VDE
Nominal current IN
12 A
Nominal cross section
2.5 mm²
Maximum load current
12 A
Insulating material
PA
Flammability rating according to UL 94
V0
Internal cylindrical gage
A3
Stripping length
7 mm
Screw thread
M3
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, max.
1.5 mm²
12/23/2016 Page 2 / 13
https://www.phoenixcontact.com/gb/products/1792825
Printed-circuit board connector - MVSTBW 2,5/ 9-ST-5,08 - 1792825
Technical data
Connection data
Minimum AWG according to UL/CUL
30
Maximum AWG according to UL/CUL
12
Standards and Regulations
Connection in acc. with standard
EN-VDE
CSA
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Dimensional drawing
12,6
8,3
26
a+5,08
2,54
5,08
a
Classifications
eCl@ss
eCl@ss 4.0
272607xx
eCl@ss 4.1
27260701
eCl@ss 5.0
27260701
eCl@ss 5.1
27260701
eCl@ss 6.0
27260704
eCl@ss 7.0
27440402
eCl@ss 8.0
27440309
eCl@ss 9.0
27440309
ETIM
ETIM 3.0
EC001121
ETIM 4.0
EC002638
ETIM 5.0
EC002638
ETIM 6.0
EC002638
12/23/2016 Page 3 / 13
https://www.phoenixcontact.com/gb/products/1792825
Printed-circuit board connector - MVSTBW 2,5/ 9-ST-5,08 - 1792825
Classifications
UNSPSC
UNSPSC 6.01
30211810
UNSPSC 7.0901
39121409
UNSPSC 11
39121409
UNSPSC 12.01
39121409
UNSPSC 13.2
39121409
Approvals
Approvals
Approvals
UL Recognized / VDE Gutachten mit Fertigungsüberwachung / cUL Recognized / IECEE CB Scheme / CSA / EAC / cULus Recognized
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
D
mm²/AWG/kcmil
30-12
30-12
Nominal current IN
15 A
10 A
Nominal voltage UN
300 V
300 V
VDE Gutachten mit
Fertigungsüberwachung
http://www.vde.com/en/Institute/OnlineService/
VDE-approved-products/Pages/Online-Search.aspx
mm²/AWG/kcmil
0.2-2.5
Nominal current IN
12 A
Nominal voltage UN
250 V
cUL Recognized
40004701
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
D
mm²/AWG/kcmil
30-12
30-12
Nominal current IN
15 A
10 A
Nominal voltage UN
300 V
300 V
FILE E 60425
FILE E 60425
12/23/2016 Page 4 / 13
https://www.phoenixcontact.com/gb/products/1792825
Printed-circuit board connector - MVSTBW 2,5/ 9-ST-5,08 - 1792825
Approvals
IECEE CB Scheme
http://www.iecee.org/
mm²/AWG/kcmil
0.2-2.5
Nominal current IN
12 A
Nominal voltage UN
250 V
CSA
DE1-56062-B1B2
http://www.csagroup.org/services/testingand-certification/certified-product-listing/
B
D
mm²/AWG/kcmil
28-12
28-12
Nominal current IN
10 A
10 A
Nominal voltage UN
300 V
300 V
13631
EAC
B.01742
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
Coding element
Coding star - CR-MSTB - 1734401
Coding section, inserted into the recess in the header or the inverted plug, red insulating material
Coding profile - CP-MSTB - 1734634
Coding profile, is inserted into the slot on the plug or inverted header, red insulating material
12/23/2016 Page 5 / 13
https://www.phoenixcontact.com/gb/products/1792825
Printed-circuit board connector - MVSTBW 2,5/ 9-ST-5,08 - 1792825
Accessories
Labeled terminal marker
Marker card - SK 5,08/3,8:FORTL.ZAHLEN - 0804293
Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting
type: Adhesive, for terminal block width: 5.08 mm, Lettering field: 5.08 x 3.8 mm
Marker pen
Marker pen - B-STIFT - 1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100
mm, 2-component grip, with non-slip grip
Terminal marking
Marker card - SK 5,08/3,8:UNBEDRUCKT - 0805412
Marker card, Card, white, unlabeled, can be labeled with: Marker pen, Mounting type: Adhesive, for terminal block
width: 5.08 mm, Lettering field: 5.08 x 3.8 mm
Additional products
12/23/2016 Page 6 / 13
https://www.phoenixcontact.com/gb/products/1792825
Printed-circuit board connector - MVSTBW 2,5/ 9-ST-5,08 - 1792825
Accessories
Base strip - MSTBW 2,5/ 9-G-5,08 - 1735811
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
Base strip - MSTBVA 2,5/ 9-G-5,08 - 1755804
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
Base strip - MSTBA 2,5/ 9-G-5,08 - 1757310
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
Base strip - MSTBV 2,5/ 9-G-5,08 - 1758089
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
Base strip - MSTB 2,5/ 9-G-5,08 - 1759088
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
12/23/2016 Page 7 / 13
https://www.phoenixcontact.com/gb/products/1792825
Printed-circuit board connector - MVSTBW 2,5/ 9-ST-5,08 - 1792825
Accessories
Base strip - MDSTB 2,5/ 9-G1-5,08 - 1762444
Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering, In combination with MVSTB or FKCV plug components, both
an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug
components is not possible!
Base strip - MDSTBV 2,5/ 9-G1-5,08 - 1762570
Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering, In combination with MVSTB or FKCV plug components, both
an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug
components is not possible!
Base strip - SMSTBA 2,5/ 9-G-5,08 - 1767449
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
Base strip - MSTBA 2,5/ 9-G-5,08-LA - 1768011
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
Base strip - SMSTB 2,5/ 9-G-5,08 - 1769531
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
12/23/2016 Page 8 / 13
https://www.phoenixcontact.com/gb/products/1792825
Printed-circuit board connector - MVSTBW 2,5/ 9-ST-5,08 - 1792825
Accessories
Base strip - MSTBV 2,5/ 9-GEH-5,08 - 1808531
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
Base strip - MDSTBA 2,5/ 9-G-5,08 - 1842131
Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering, The article can be aligned to create different nos. of positions!
In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or
FKCVR) must be used. Combination with TMSTBP plug components is not possible!
Base strip - MDSTBW 2,5/ 9-G-5,08 - 1842283
Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering, The article can be aligned to create different nos. of positions!
In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or
FKCVR) must be used. Combination with TMSTBP plug components is not possible!
Base strip - MDSTB 2,5/ 9-G-5,08 - 1842584
Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering, Can be aligned! Mounting flange: Order No. 1736771, 1736768.
In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or
FKCVR) must be used. Combination with TMSTBP plug components is not possible!
Base strip - MDSTBVA 2,5/ 9-G-5,08 - 1845400
Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering, The article can be aligned to create different nos. of positions!
In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or
FKCVR) must be used. Combination with TMSTBP plug components is not possible!
12/23/2016 Page 9 / 13
https://www.phoenixcontact.com/gb/products/1792825
Printed-circuit board connector - MVSTBW 2,5/ 9-ST-5,08 - 1792825
Accessories
Base strip - MDSTBV 2,5/ 9-G-5,08 - 1845552
Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering, Can be aligned! Mounting flange: Order No. 1836477, 1836480.
In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or
FKCVR) must be used. Combination with TMSTBP plug components is not possible!
Base strip - EMSTBVA 2,5/ 9-G-5,08 - 1859580
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Press-in technology
Base strip - EMSTBA 2,5/ 9-G-5,08 - 1880371
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Press-in technology
Base strip - DFK-MSTBA 2,5/ 9-G-5,08 - 1898907
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
Base strip - DFK-MSTBVA 2,5/ 9-G-5,08 - 1899207
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: green,
Contact surface: Tin, Mounting: Wave soldering
12/23/2016 Page 10 / 13
https://www.phoenixcontact.com/gb/products/1792825
Printed-circuit board connector - MVSTBW 2,5/ 9-ST-5,08 - 1792825
Accessories
Printed-circuit board connector - CC 2,5/ 9-G-5,08 P26THR - 1954540
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
Printed-circuit board connector - CC 2,5/ 9-G-5,08 P26THRR88 - 1954650
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
Printed-circuit board connector - CCA 2,5/ 9-G-5,08 P26THR - 1954993
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
Printed-circuit board connector - CCA 2,5/ 9-G-5,08 P26THRR88 - 1955109
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
Printed-circuit board connector - CCV 2,5/ 9-G-5,08 P26THR - 1955484
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
12/23/2016 Page 11 / 13
https://www.phoenixcontact.com/gb/products/1792825
Printed-circuit board connector - MVSTBW 2,5/ 9-ST-5,08 - 1792825
Accessories
Printed-circuit board connector - CCV 2,5/ 9-G-5,08 P26THRR88 - 1955594
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
Printed-circuit board connector - CCVA 2,5/ 9-G-5,08 P26THR - 1955921
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
Printed-circuit board connector - CCVA 2,5/ 9-G-5,08 P26THRR88 - 1956030
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole
reflow technology can be found under “Downloads”
Printed-circuit board connector - CCA 2,5/ 9-GL-5,08P26THR - 1959134
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CCA 2,5/ 9-GL-5,08P26THRR88 - 1959202
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
12/23/2016 Page 12 / 13
https://www.phoenixcontact.com/gb/products/1792825
Printed-circuit board connector - MVSTBW 2,5/ 9-ST-5,08 - 1792825
Accessories
Printed-circuit board connector - CCA 2,5/ 9-GR-5,08P26THR - 1959273
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CCA 2,5/ 9-GR-5,08P26THRR88 - 1959341
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CCVA 2,5/ 9-GL-5,08P26THR - 1959972
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CCVA 2,5/ 9-GR-5,08P26THR - 1960152
Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 9, Pitch: 5.08 mm, Color: black,
Contact surface: Tin, Mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
12/23/2016 Page 13 / 13
工商网监
湘ICP备2023018690号
