PV-FT-CF-C-4-130-BU - Device connector front
mounting
1805151
https://www.phoenixcontact.com/us/products/1805151
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.
Device connector front mounting, Range of articles: Sunclix, housing material: PPE, color: black,
min. conductor cross section: 4 mm2, Connection method: Crimp, Contact connection type:
Socket, cable length: 130
Commercial data
Item number
1805151
Packing unit
1 pc
Minimum order quantity
50 pc
Sales key
AB02
Product key
ABLBAA
Catalog page
Page 420 (C-2-2013)
GTIN
4046356671774
Weight per piece (including packing)
12.16 g
Weight per piece (excluding packing)
11 g
Customs tariff number
85444290
Country of origin
DE
Jan 8, 2024, 9:53 AM
Page 1 (10)
PV-FT-CF-C-4-130-BU - Device connector front
mounting
1805151
https://www.phoenixcontact.com/us/products/1805151
Technical data
Notes
Safety note
Safety note
• WARNING: Commission properly functioning products only.
The products must be regularly inspected for damage.
Decommission defective products immediately. Replace
damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and
operate the product. They must observe the following safety
notes. The qualified personnel must be familiar with the basics of
electrical engineering. They must be able to recognize and
prevent danger. The relevant symbol on the packaging indicates
that only personnel familiar with electrical engineering are
allowed to install and operate the product.
WARNING: The connectors may not be plugged in or
disconnected under load. Ignoring the warning or improper use
may damage persons and/or property.
• The products are suitable for applications in plant, controller,
and electrical device engineering.
• Assembled products may not be manipulated or improperly
opened.
• Only use mating connectors that are specified in the technical
data of the standards listed (e.g. the ones listed in the product
accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party
manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector
housings must be grounded
• Ensure that the protective or functional ground has been
properly connected.
• Observe the corresponding technical data. You will find
information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• The installation notes/Design In documents online on the
download page at phoenixcontact.com/products must be
observed for this product.
• Use a protective cap to protect connectors that are not in use.
The suitable accessories are available online in the accessory
section of the product at phoenixcontact.com/products
• The connector warms up in normal operation. Depending on the
ambient conditions, the surface of the connector can continue to
warm up. In this case, the user is responsible for posting
warnings (e.g. DIN EN ISO 13732-1:2008-12).
• Operate the connector only when it is fully plugged in and
interlocked.
• Ensure that when laying the cable, the tensile load on the
connectors does not exceed the upper limit specified in the
standards.
Jan 8, 2024, 9:53 AM
Page 2 (10)
PV-FT-CF-C-4-130-BU - Device connector front
mounting
1805151
https://www.phoenixcontact.com/us/products/1805151
• Observe the minimum bending radius of the cable. Lay the
cable without twisting it.
Product properties
Product type
Panel feed-through
Product family
SUNCLIX
Insulation characteristics
Protection class
II
Degree of pollution
2
Connection data
Conductor connection
Tightening torque
1.8 Nm ±0.1 Nm
Dimensions
Dimensional drawing
Width
18.6 mm
Height
18.6 mm
Length
43.2 mm
Electrical properties
Rated voltage (III/2)
1000 V
Rated surge voltage (III/2)
12 kV
Rated current (4.0 mm²)
35 A
Contact resistance
0.45 mΩ
Mechanical properties
Mechanical data
Insertion force
45 N ±10 N
Withdrawal force
250 N ±50 N
Material specifications
Color
black
Color of the housing part
black
Flammability rating according to UL 94
V0
Insulating material group
III
Seal material
EPDM
Insulating material
mPPE
Contact surface
Silver Ag
Jan 8, 2024, 9:53 AM
Page 3 (10)
PV-FT-CF-C-4-130-BU - Device connector front
mounting
1805151
https://www.phoenixcontact.com/us/products/1805151
Cable seal material
Elastosil LR 3065/50
Contact material
Cu
Contact surface material
Ag
Contact carrier material
PPE
O-ring material
Silopren LSR 2660
Housing material
PPE
Outer sheath, material
PE-X
Cable/line
Cable length
130 mm
Cable type
S02
Structure of individual litz in acc. with VDE 0295 / smallest wire
diameter
56x0.3
External cable diameter
4.6 mm ±0.15 mm
Outer sheath, material
PE-X
External sheath, color
blue
Single wire, cross section
4 mm²
Cable pull-out force
> 80 N
Halogen-free
yes
Mounting
Connection method
Crimp
Environmental and real-life conditions
Ambient conditions
Degree of protection (when plugged in)
IP66 / IP68 (2 m / 24 h)
Degree of protection (not plugged in)
IP65
Ambient temperature (operation)
-40 °C ... 85 °C
Ambient temperature (assembly)
-25 °C ... 50 °C
Jan 8, 2024, 9:53 AM
Page 4 (10)
PV-FT-CF-C-4-130-BU - Device connector front
mounting
1805151
https://www.phoenixcontact.com/us/products/1805151
Drawings
Dimensional drawing
c
Ø18,6
43,2
x
Dimension x = cable length
c: panel thickness - plastic: 2 - 6 mm; metal: 2 - 5 mm
Jan 8, 2024, 9:53 AM
Page 5 (10)
PV-FT-CF-C-4-130-BU - Device connector front
mounting
1805151
https://www.phoenixcontact.com/us/products/1805151
±0,05
Ø12,1
±0,1
a
b
Ø1,2
5,2
±0,05
Dimensional drawing
5,7
±0,05
c
Jan 8, 2024, 9:53 AM
Page 6 (10)
PV-FT-CF-C-4-130-BU - Device connector front
mounting
1805151
https://www.phoenixcontact.com/us/products/1805151
Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1805151
TÜV Rheinland
Approval ID: R 60165003-0001
Jan 8, 2024, 9:53 AM
Page 7 (10)
PV-FT-CF-C-4-130-BU - Device connector front
mounting
1805151
https://www.phoenixcontact.com/us/products/1805151
Classifications
ECLASS
ECLASS-11.0
27440107
ECLASS-12.0
27440107
ECLASS-13.0
27440107
ETIM
ETIM 9.0
EC002635
UNSPSC
UNSPSC 21.0
39121400
Jan 8, 2024, 9:53 AM
Page 8 (10)
PV-FT-CF-C-4-130-BU - Device connector front
mounting
1805151
https://www.phoenixcontact.com/us/products/1805151
Environmental product compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Jan 8, 2024, 9:53 AM
Page 9 (10)
PV-FT-CF-C-4-130-BU - Device connector front
mounting
1805151
https://www.phoenixcontact.com/us/products/1805151
Accessories
PV-FT-C NUT BK - Screw connection
1775880
https://www.phoenixcontact.com/us/products/1775880
Screw connection, Range of articles: Sunclix
PV-C PROTECTION CAP - Protective cap
1785430
https://www.phoenixcontact.com/us/products/1785430
Protective cap, Range of articles: Sunclix, color: black. self-sealing, without
interlock, set consisting of: 1 protective cap for connector side and 1 protective
cap for coupling side
Phoenix Contact 2024 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Jan 8, 2024, 9:53 AM
Page 10 (10)