1805164

PV-FT-CM-C-4-130-RD - Device connector front mounting 1805164 https://www.phoenixcontact.com/us/products/1805164 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector front mounting, Range of articles: Sunclix, housing material: PPE, color: black, min. conductor cross section: 4 mm2, Connection method: Crimp, Contact connection type: Pin, cable length: 130 Commercial data Item number 1805164 Packing unit 1 pc Minimum order quantity 50 pc Sales key AB02 Product key ABLBAA Catalog page Page 420 (C-2-2013) GTIN 4046356671446 Weight per piece (including packing) 14.41 g Weight per piece (excluding packing) 14.114 g Customs tariff number 85444290 Country of origin DE Jan 8, 2024, 9:53 AM Page 1 (10) PV-FT-CM-C-4-130-RD - Device connector front mounting 1805164 https://www.phoenixcontact.com/us/products/1805164 Technical data Notes Safety note Safety note • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. • The products are suitable for applications in plant, controller, and electrical device engineering. • Assembled products may not be manipulated or improperly opened. • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). • When using the product in direct connection with third-party manufacturers, the user is responsible. • For operating voltages > 50 V AC, conductive connector housings must be grounded • Ensure that the protective or functional ground has been properly connected. • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). • Operate the connector only when it is fully plugged in and interlocked. • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. Jan 8, 2024, 9:53 AM Page 2 (10) PV-FT-CM-C-4-130-RD - Device connector front mounting 1805164 https://www.phoenixcontact.com/us/products/1805164 • Observe the minimum bending radius of the cable. Lay the cable without twisting it. Product properties Product type Panel feed-through Product family SUNCLIX Insulation characteristics Protection class II Degree of pollution 2 Connection data Conductor connection Tightening torque 1.8 Nm ±0.1 Nm Dimensions Dimensional drawing Width 26.3 mm Height 26.3 mm Length 41.5 mm Electrical properties Rated voltage (III/2) 1000 V Rated surge voltage (III/2) 12 kV Rated current (4.0 mm²) 35 A Contact resistance 0.45 mΩ Mechanical properties Mechanical data Insertion force 45 N ±10 N Withdrawal force 250 N ±50 N Material specifications Color black Color of the housing part black Flammability rating according to UL 94 V0 Insulating material group III Seal material EPDM Insulating material mPPE Contact surface Silver Ag Jan 8, 2024, 9:53 AM Page 3 (10) PV-FT-CM-C-4-130-RD - Device connector front mounting 1805164 https://www.phoenixcontact.com/us/products/1805164 Cable seal material Elastosil LR 3065/50 Contact material Cu Contact surface material Ag Contact carrier material PPE Housing material PPE Outer sheath, material PE-X Cable/line Cable length 130 mm Cable type S02 Structure of individual litz in acc. with VDE 0295 / smallest wire diameter 56x0.3 External cable diameter 4.6 mm ±0.15 mm Outer sheath, material PE-X External sheath, color red Single wire, cross section 4 mm² Cable pull-out force > 80 N Halogen-free yes Mounting Connection method Crimp Environmental and real-life conditions Ambient conditions Degree of protection (when plugged in) IP66 / IP68 (2 m / 24 h) Degree of protection (not plugged in) IP65 Ambient temperature (operation) -40 °C ... 85 °C Ambient temperature (assembly) -25 °C ... 50 °C Jan 8, 2024, 9:53 AM Page 4 (10) PV-FT-CM-C-4-130-RD - Device connector front mounting 1805164 https://www.phoenixcontact.com/us/products/1805164 Drawings Dimensional drawing Ø12,1 b 5,2 ±0,05 Ø1,2 ±0,1 a ±0,05 ±0,05 5,7 c Jan 8, 2024, 9:53 AM Page 5 (10) PV-FT-CM-C-4-130-RD - Device connector front mounting 1805164 https://www.phoenixcontact.com/us/products/1805164 Dimensional drawing 18,6 26,4 c 41,6 DO NOT DISCONNECT UNDER LOAD x Dimension x = cable length c: panel thickness - plastic: 2 - 6 mm; metal: 2 - 5 mm Jan 8, 2024, 9:53 AM Page 6 (10) PV-FT-CM-C-4-130-RD - Device connector front mounting 1805164 https://www.phoenixcontact.com/us/products/1805164 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1805164  TÜV Rheinland Approval ID: R 60165003-0001 Jan 8, 2024, 9:53 AM Page 7 (10) PV-FT-CM-C-4-130-RD - Device connector front mounting 1805164 https://www.phoenixcontact.com/us/products/1805164 Classifications ECLASS ECLASS-11.0 27440107 ECLASS-12.0 27440107 ECLASS-13.0 27440107 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 Jan 8, 2024, 9:53 AM Page 8 (10) PV-FT-CM-C-4-130-RD - Device connector front mounting 1805164 https://www.phoenixcontact.com/us/products/1805164 Environmental product compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Jan 8, 2024, 9:53 AM Page 9 (10) PV-FT-CM-C-4-130-RD - Device connector front mounting 1805164 https://www.phoenixcontact.com/us/products/1805164 Accessories PV-FT-C NUT BK - Screw connection 1775880 https://www.phoenixcontact.com/us/products/1775880 Screw connection, Range of articles: Sunclix PV-C PROTECTION CAP - Protective cap 1785430 https://www.phoenixcontact.com/us/products/1785430 Protective cap, Range of articles: Sunclix, color: black. self-sealing, without interlock, set consisting of: 1 protective cap for connector side and 1 protective cap for coupling side Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 9:53 AM Page 10 (10)