1827046

2017-12-19 Product version 02 Data sheet Document revision 0 Order No.: 1827046 Type: MCVW 1,5/ 9-ST-3,81 Plug component, Screw connection with tension sleeve Main features      No. of pos. Conductor cross section Color Pitch Connection method 9 1.5 mm² green 3.81 mm Screw connection with tension sleeve     Nominal current Nominal voltage Connection direction Type of packaging 8A 160 V -90 ° packed in cardboard   1   The figure shows a 10-position version of the product   Your advantages Well-known connection principle allows worldwide use Low temperature rise, thanks to maximum contact force Allows connection of two conductors Make sure you always use the latest documentation. It can be downloaded at: phoenixcontact.net/product/1827046 © PHOENIX CONTACT 2017 2 2017-12-19 Product version 02 Main features........................................................................................................................... 1 2 Your advantages ..................................................................................................................... 1 3 Table of contents ..................................................................................................................... 2 4 3D model in PDF can be activated (Acrobat Reader only)....................................................... 3 5 item properties......................................................................................................................... 4 5.1 Connection capacity ............................................................................................................. 4 5.2 Material data ...................................................................................................................... 4 6 Dimensions.............................................................................................................................. 4 6.1 Dimensions for the product .................................................................................................... 5 7 Series drawing......................................................................................................................... 6 8 Packaging information ............................................................................................................. 7 9 Application............................................................................................................................... 7 9.1 Temperature limit values ....................................................................................................... 7 10 Mechanical tests...................................................................................................................... 8 10.1 Termination and connection method ......................................................................................... 8 10.2 Pull-out test ........................................................................................................................ 8 11 Electrical tests ......................................................................................................................... 9 11.1 Electrical data ..................................................................................................................... 9 11.2 Air and creepage distances .................................................................................................... 9 12 Current carrying capacity/derating curves ............................................................................. 10 13 Environmental and durability tests ......................................................................................... 11 13.1 Vibration test .................................................................................................................... 11 14 Classification for connectors.................................................................................................. 11 15 Approvals .............................................................................................................................. 11 16 Commercial Data................................................................................................................... 13 17 corresponding headers.......................................................................................................... 13 18 Accessories ........................................................................................................................... 13 19 Combination tests.................................................................................................................. 14   Table of contents 1 © PHOENIX CONTACT 2017 3   Document revision 0   1827046 MCVW 1,5/ 9-ST-3,81 REF 1826979 PHOENIX CONTACT 2 / 14 2017-12-19 Product version 02 1827046 MCVW 1,5/ 9-ST-3,81 3D model in PDF can be activated (Acrobat Reader only) © PHOENIX CONTACT 2017       4 Document revision 0 REF 1826979 PHOENIX CONTACT 3 / 14 2017-12-19 Product version 02 1827046 MCVW 1,5/ 9-ST-3,81 5 Document revision 0 item properties Order No. 1827046 Type MCVW 1,5/ 9-ST-3,81 Type of contact Female connector Range of articles MCVW 1,5/..-ST Pitch 3.81 mm Number of positions 9 Connection method Screw connection with tension sleeve Drive form screw head Slotted Screw thread M2 Tightening torque 0.22 Nm   ...   0.25 Nm Locking without 5.1 Connection capacity Conductor cross section, solid 0.14 mm² to 1.5 mm² Conductor cross section, flexible 0.14 mm² to 1.5 mm² Conductor cross section AWG/kcmil 28 to 16 2 conductors with same cross section, solid 0.08 mm² to 0.5 mm² 2 conductors with same cross section, stranded 0.08 mm² to 0.75 mm² Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² to 1.5 mm² 0.25 mm² to 0.5 mm² 2 conductors with same cross section, stranded, with ferrule without plastic sleeve 0.25 mm² to 0.34 mm² 2 conductors with same cross section, stranded, with TWIN ferrules with plastic sleeve 0.5 mm² to 0.5 mm² Cylindrical gauge a x b / diameter 2.4 mm x 1.5 mm / 1.6 mm Stripping length 7 mm Material data   5.2   Conductor cross section flexible, with ferrule with plastic sleeve Material of metal parts Note WEEE/RoHS-compliant, whisker-free acc. to IEC 60068-2-82/JEDEC JESD 201 Contact material Cu alloy Sn 4 µm ... 8 µm   Terminal point surface Surface characteristics Sn 4 µm ... 8 µm hot-dip tin-plated Insulating material data Housing Insulating material PA CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Color green (6021) Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C 6 Housing © PHOENIX CONTACT 2017 Surface contact area Dimensions REF 1826979 PHOENIX CONTACT 4 / 14 2017-12-19 Product version 02 1827046 MCVW 1,5/ 9-ST-3,81 6.1 Document revision 0 Dimensions for the product 10.4 mm Width 35.08 mm Total height 19.15 mm Dimension a 30.48 mm © PHOENIX CONTACT 2017       Length REF 1826979 PHOENIX CONTACT 5 / 14 2017-12-19 Product version 02 1827046 MCVW 1,5/ 9-ST-3,81 Series drawing © PHOENIX CONTACT 2017       7 Document revision 0 REF 1826979 PHOENIX CONTACT 6 / 14 2017-12-19 Product version 02 1827046 MCVW 1,5/ 9-ST-3,81 8 Document revision 0 Packaging information Type of packaging packed in cardboard Pieces per package 50 9 Application 9.1 Temperature limit values -40 °C ... 70 °C Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C (dependent on the derating curve) © PHOENIX CONTACT 2017       Ambient temperature (storage/transport) REF 1826979 PHOENIX CONTACT 7 / 14 2017-12-19 Product version 02 1827046 MCVW 1,5/ 9-ST-3,81 10 Document revision 0 Mechanical tests Mechanical test group A Specification IEC 61984:2008-10 Visual test Test passed Specification IEC 60512-1-1:2002-02 Dimensional test Test passed Specification IEC 60512-1-2:2002-02 Resistance of marking Test passed Specification IEC 60068-2-70:1995-12 Insertion and withdrawal force Test passed Specification IEC 60512-13-2:2006-02 No. of cycles 25 Insertion strength per pos. approx. 8N Withdraw strength per pos. approx. 6N Polarization and coding Test passed Specification IEC 60512-13-5:2006-02 Test force 20 N Contact retention in insert Test passed Specification IEC 60512-15-1:2008-05 Test force per pos. 22 N 10.1 Termination and connection method IEC 60999-1:1999-11 Check for damage to conductor or loosening Test passed 10.2   Specification Pull-out test Termination and connection method: pull-out test IEC 60999-1:1999-11 Result Test passed Conductor cross section/conductor type/tractive force actual value 0.14 mm² / solid / > 10 N Conductor cross section/conductor type/tractive force actual value 0.14 mm² / stranded / > 10 N   Specification 1.5 mm² / solid / > 40 N Conductor cross section/conductor type/tractive force actual value 1.5 mm² / stranded / > 40 N © PHOENIX CONTACT 2017   Conductor cross section/conductor type/tractive force actual value REF 1826979 PHOENIX CONTACT 8 / 14 2017-12-19 Product version 02 1827046 MCVW 1,5/ 9-ST-3,81 11 Electrical tests 11.1 Electrical data Rated current / conductor cross section Document revision 0 8 A / 1.5 mm² Rated insulation voltage (III/2) 160 V Rated surge voltage (III/2) 2.5 kV Contact resistance 3.7 mΩ Degree of pollution 2 11.2 Air and creepage distances Component Plug component Specification IEC 60664-1:2007-04 Mains type unearthed mains Insulating material group I Comparative tracking index (IEC 60112:2003-01) CTI 600 Rated insulation voltage 160 V 160 V Rated surge voltage 2.5 kV 2.5 kV 2.5 kV Degree of pollution 3 2 2 Overvoltage category III III II Minimum clearance case A (inhomogeneous field) 1.5 mm 1.5 mm 1.5 mm Minimum value of the creepage path requirement in acc. with table 2 mm 1.5 mm 1.6 mm © PHOENIX CONTACT 2017       320 V REF 1826979 PHOENIX CONTACT 9 / 14 2017-12-19 Product version 02 1827046 MCVW 1,5/ 9-ST-3,81 12 Document revision 0 Current carrying capacity/derating curves Specification IEC 61984:2008-10 Note Representation based on IEC 60512-5-2:2002-02 Reduction factor 0.8 Number of positions See diagram Conductor cross section 1.5 mm² Type: MCVW 1,5/...-ST-3,81 with MC 1,5/...-G-3,81   16 14 12 10 8 6 4 2 0 = 2-pos. = 5-pos. = 16-pos. 0 10 20 30 40 50 60 70 80 90 100 110   Current strength [A] Type: MCV(W/R) 1,5/...-ST-3,81 with MCD 1,5/...-G1-3,81 Ambient temperature [°C]   16 14 12 10 8 6 4 2 0 = 2-pos. = 5-pos. = 16-pos. 0 10 20 30 40 50 60 70 80 © PHOENIX CONTACT 2017 Current strength [A] Type: MCV(W/R) 1,5/...-ST-3,81 with MCDV 1,5/...-G1-3,81 90 100 110 Ambient temperature [°C] Type: MCV(W/R) 1,5/...-STF-3,81 with IMC 1,5/...-ST-3,81 88457_1000_en REF 1826979 PHOENIX CONTACT 10 / 14 2017-12-19 Product version 02 1827046 MCVW 1,5/ 9-ST-3,81 13 Environmental and durability tests 13.1 Vibration test Document revision 0 Specification IEC 60068-2-6:2007-12 Result Test passed Frequency 10 - 150 - 10 Hz Sweep speed 1 octave/min Amplitude 0.35 mm (10 - 60.1 Hz) Acceleration 5 g (60.1 - 150 Hz) Test duration per axis 2.5 h Test directions X-, Y- and Z-axis 14 Classification for connectors Specification IEC 61984:2008-10 Main features Connectors without switching capacity (COC) Construction form Fixed connectors Strain relief elements without strain relief Connection method Can be reconnected Protection against electric shock Not encapsulated - touch-proof when inserted Protective conductor without PE Lock no Connection method Screw terminal points Approvals   15 Use group B D mm²/AWG/kcmil 28-16 28-16 Voltage 300 V 300 V Current 8A 8A   CSA  VDE Gutachten mit Fertigungsüberwachung  0.2-1.5 Voltage 160 V Current 8A   mm²/AWG/kcmil mm²/AWG/kcmil 0.2-1.5 Voltage 160 V Current 8A © PHOENIX CONTACT 2017 IECEE CB Scheme  CCA mm²/AWG/kcmil 0.2-1.5 Voltage 160 V Current 8A REF 1826979 PHOENIX CONTACT 11 / 14 2017-12-19 Product version 02 1827046 MCVW 1,5/ 9-ST-3,81 Document revision 0 cULus Recognized  Use group B D mm²/AWG/kcmil 30-14 30-14 Voltage 300 V 300 V Current 8A 8A © PHOENIX CONTACT 2017       EAC  REF 1826979 PHOENIX CONTACT 12 / 14 2017-12-19 Product version 02 1827046 MCVW 1,5/ 9-ST-3,81 16 Document revision 0 Commercial Data Order No. 1827046 Type MCVW 1,5/ 9-ST-3,81 Pieces per package 50 Net weight 7.038 g GTIN 4017918105297 Information that applies locally, see link on page 1 Country of origin 17 Information that applies locally, see link on page 1 corresponding headers Order No. Type 1707078 MCV 1,5/ 9-G-3,81 P14 THR 1707492 MCV 1,5/ 9-G-3,81 P26 THR 1713567 MCV 1,5/ 9-G-3,81 P26 THRR56 1782640 MC 1,5/ 9-G-3,81 P20 THRR56 1803345 MC 1,5/ 9-G-3,81 1803497 MCV 1,5/ 9-G-3,81 1827347 SMC 1,5/ 9-G-3,81 1830020 MCD 1,5/ 9-G-3,81 1830473 MCDV 1,5/ 9-G-3,81 1837502 MCVDU 1,5/ 9-G-3,81 1843143 MCD 1,5/ 9-G1-3,81 1847806 MCDV 1,5/ 9-G1-3,81 1860715 EMCV 1,5/ 9-G-3,81 MCO 1,5/ 9-GR-3,81 MCO 1,5/ 9-GL-3,81   1861714 1861798 EMC 1,5/ 9-G-3,81 MC 1,5/ 9-G-3,81 THT 1943823 MC 1,5/ 9-G-3,81 THT-R56   1897872 1908839 18 Accessories Description Order No. Type SK 3,81/2,8:FORTL.ZAHLEN 1205037 SZS 0,4X2,5 VDE 0803883 SK U/2,8 WH:UNBEDRUCKT 0805056 SK 3,81/2,8:SO Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm 1051993 B-STIFT Insertion bridge for plugs featuring a screw connection with a 3.81 mm pitch 1733495 EBPL 2-3,81 Insertion bridge for plugs featuring a screw connection with a 3.81 mm pitch 1733505 EBPL 3-3,81 Insertion bridge for plugs featuring a screw connection with a 3.81 mm pitch 1733518 EBPL 4-3,81 REF 1826979 PHOENIX CONTACT 13 / 14 © PHOENIX CONTACT 2017   0804109 Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip 2017-12-19 Product version 02 1827046 MCVW 1,5/ 9-ST-3,81 19 Document revision 0 Combination tests MCVW 1,5/..-ST MC 1,5/..-G MCD 1,5/..-G1 MCDV 1,5/..-G1 IMC 1,5/..-ST Specification IEC 61984 IEC 61984 IEC 61984 IEC 61984 Mechanical tests (A) Insertion/withdrawal force per position approx. 8 N / 6 N approx. 8 N / 6 N approx. 8 N / 6 N approx. 7 N / 3 N Polarization when inserted Requirement >20 N Test passed Test passed Test passed Test passed Contact holder in insert Requirements >20 N Test passed Test passed Test passed Test passed 4 mΩ 4 mΩ 25 25 25 4.3 mΩ 4.1 mΩ Durability tests (B) 3.7 mΩ 25 Contact resistance R2 3.9 mΩ Rated impulse voltage at sea level Voltage waveform ≥ (1.2/50 μs) 4.8 kV 2.95 kV 2.95 kV 2.95 kV Power-frequency withstand voltage Voltage waveform ≥ (50/60 Hz) 2.21 kV 1.39 kV 1.39 kV 1.39 kV Insulation resistance Requirements > 5 MΩ > 0.2 TΩ > 0.4 TΩ > 0.4 TΩ > 0.2 TΩ 16 16 16 16 1.5 mm²   Contact resistance R1 Insertion/withdrawal cycles Thermal tests (C) Tested number of positions 1.5 mm² 1.5 mm² 1.5 mm² Test current 8A 8A 8A Upper limiting temperature Requirements < 100°C Test passed Test passed Test passed   Tested conductor cross section Test passed Test sequence 1: low temperature storage -40 °C/2 h -40 °C/2 h -40 °C/2 h -40 °C/2 h Test sequence 2: heat storage 100 °C/168 h 100 °C/168 h 100 °C/168 h 100 °C/168 h Test sequence 3: noxious gas storage (ISO 6988) 0.2 dm3 SO2 on 300 dm3/ 0.2 dm3 SO2 on 300 dm3/ 0.2 dm3 SO2 on 300 dm3/ 0.2 dm3 SO2 on 300 dm3/ 40 °C/1 cycle 40 °C/1 cycle 40 °C/1 cycle 40 °C/1 cycle Rated impulse voltage at sea level Voltage waveform ≥ (1.2/50 μs) 4.8 kV 2.95 kV 2.95 kV 2.95 kV Power-frequency withstand voltage Voltage waveform ≥ (50/60 Hz) 2.21 kV 1.39 kV 1.39 kV 1.39 kV   Climatic tests (D) Specification IEC 61984:2008-10 IEC 61984:2008-10 IEC 61984:2008-10 IEC 61984:2008-10 Degree of protection Finger safety with IP20 test finger Finger safety with IP20 test finger Finger safety with IP20 test finger Finger safety with IP20 test finger REF 1826979 PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany phoenixcontact.com PHOENIX CONTACT 14 / 14 © PHOENIX CONTACT 2017 Environmental and endurance tests (E)