1853531

Contact insert - VC-AML 6 1853531 https://www.phoenixcontact.com/us/products/1853531 Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Contact insert, Range of articles: VARIOCON, Contact insert, housing material: Polyamide, color: light grey, number of positions: 6, rated voltage: 250, rated current: 10 A, Connection method: PCB connection, Type of contact: Pin. Connectors may only be connected/disconnected when under no load. Commercial Data Item number 1853531 Packing unit 1 pc Minimum order quantity 50 pc Sales Key A16 Product Key ABLACA Catalog Page Page 27 (C-2-2013) GTIN 4017918132897 Weight per Piece (including packing) 5.4 g Weight per Piece (excluding packing) 5.4 g Customs tariff number 85369010 Country of origin PL Dec 9, 2022, 12:26 PM Page 1 (9) Contact insert - VC-AML 6 1853531 https://www.phoenixcontact.com/us/products/1853531 Technical Data Notes General Connectors may only be connected/disconnected when under no load. Safety note Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. • The products are suitable for applications in plant, controller, and electrical device engineering. • When operating the connectors in outdoor applications, they must be separately protected against environmental influences. • Assembled products may not be manipulated or improperly opened. • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). • When using the product in direct connection with third-party manufacturers, the user is responsible. • For operating voltages > 50 V AC, conductive connector housings must be grounded • Ensure that the protective or functional ground has been properly connected. • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product • Only use tools recommended by Phoenix Contact • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products • Operate the connector only when it is fully plugged in. Dec 9, 2022, 12:26 PM Page 2 (9) Contact insert - VC-AML 6 1853531 https://www.phoenixcontact.com/us/products/1853531 • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. • Observe the minimum bending radius of the cable. Lay the cable without twisting it. • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties Product type Contact insert Number of positions 6 Number of module slots 1 Series VC-M Insulation characteristics Degree of pollution 3 Electrical properties Rated voltage (III/3) 250 V Nominal voltage ATD 250 Rated surge voltage 4 kV Rated surge voltage 4 kV Rated current 10 A Rated current 10 A Dimensions Dimensional drawing Width 28.6 mm Height 26.5 mm Length 15 mm Hole diameter 1.4 mm Material specifications Color light grey Color of the housing part gray Material Polyamide Flammability rating according to UL 94 V0 Insulating material group I / CTI 600 Contact material SF-Cu Contact surface material Tin-plated Dec 9, 2022, 12:26 PM Page 3 (9) Contact insert - VC-AML 6 1853531 https://www.phoenixcontact.com/us/products/1853531 Contact carrier material PA 6.6 Housing material Polyamide Cable / line Halogen-free yes Mechanical properties Mechanical data Insertion/withdrawal cycles ≥ 100 Environmental and real-life conditions Ambient conditions Ambient temperature (operation) -40 °C ... 100 °C Dec 9, 2022, 12:26 PM Page 4 (9) Contact insert - VC-AML 6 1853531 https://www.phoenixcontact.com/us/products/1853531 Drawings Dimensional drawing 15 15,9 3,5 7,5 1,3 5 7 4 Drilling plan/solder pad geometry 7,5 5 3,5 5 7 3,4 20,71 2,4 28,2 1,4 1,2 Dec 9, 2022, 12:26 PM Page 5 (9) Contact insert - VC-AML 6 1853531 https://www.phoenixcontact.com/us/products/1853531 Approvals    cUL Recognized Approval ID: FILE E 118976 Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2 250 V 8A - - Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2 250 V 8A - - UL Recognized Approval ID: FILE E 118976 EAC Approval ID: B.01687 cULus Recognized Dec 9, 2022, 12:26 PM Page 6 (9) Contact insert - VC-AML 6 1853531 https://www.phoenixcontact.com/us/products/1853531 Classifications ECLASS ECLASS-9.0 27440205 ECLASS-10.0.1 27440205 ECLASS-11.0 27440223 ETIM ETIM 8.0 EC003557 UNSPSC UNSPSC 21.0 39121400 Dec 9, 2022, 12:26 PM Page 7 (9) Contact insert - VC-AML 6 1853531 https://www.phoenixcontact.com/us/products/1853531 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Dec 9, 2022, 12:26 PM Page 8 (9) Contact insert - VC-AML 6 1853531 https://www.phoenixcontact.com/us/products/1853531 Accessories Coding profile Coding profile - CP-MSTB - 1734634 https://www.phoenixcontact.com/us/products/1734634 Coding profile, is inserted into the slot on the plug or inverted header, red insulating material Phoenix Contact 2022 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Dec 9, 2022, 12:26 PM Page 9 (9)