1855021

https://www.phoenixcontact.com/us/products/1855021 Contact insert - VC-D2-ST30-PE - 1855021 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Male contact carrier, for turned and rolled crimp contacts, type VC 2, 30-pos. + PE Product Features  Positions 15, 30, 50, and 65 are available, in accordance with housing sizes VC 1 - VC 4.  Contact types meet the requirements of IEC 60352/DIN EN 60352  Contact carriers have two further capacitive PE contacts  Pin and socket contacts can be used on both the plug and device sides  The connection data of 250 V/10 A corresponds to that of the HEAVYCON DD series   Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN Weight per Piece (excluding packing) 37.54 g Custom tariff number 85366990 Country of origin Poland Technical data Electrical characteristics Note Connectors may only be connected/disconnected when under no load. Rated voltage 250 V Rated voltage (III/3) 250 V Rated current 10 A 10 A Rated surge voltage 4 kV 12/27/2015   Page 1 / 6 https://www.phoenixcontact.com/us/products/1855021 Contact insert - VC-D2-ST30-PE - 1855021 Technical data Electrical characteristics Number of positions 30 Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C Mechanical characteristics Conductor cross section 0.14 mm² ... 1.5 mm² (stranded) Connection cross section AWG 22 ... 16 Stripping length of the individual wire 8 mm Conductor cross section flexible max. 1.5 mm² Insertion/withdrawal cycles >= 500 General Type VC2 Series VC-D Connection method Crimp connection Flammability rating according to UL 94 V0 Pollution degree 2 Overvoltage category III Material data Contact carrier material PA-GF Standards and Regulations Connection in acc. with standard CUL Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27140816 eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440205 eCl@ss 9.0 27440205 12/27/2015   Page 2 / 6 https://www.phoenixcontact.com/us/products/1855021 Contact insert - VC-D2-ST30-PE - 1855021 Classifications ETIM ETIM 2.0 EC000438 ETIM 3.0 EC000438 ETIM 4.0 EC000438 ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized      Nominal current IN 4A Nominal voltage UN 250 V 12/27/2015   Page 3 / 6 https://www.phoenixcontact.com/us/products/1855021 Contact insert - VC-D2-ST30-PE - 1855021 Approvals cUL Recognized      Nominal current IN 4A Nominal voltage UN 250 V EAC  cULus Recognized  Drawings 12/27/2015   Page 4 / 6 https://www.phoenixcontact.com/us/products/1855021 Contact insert - VC-D2-ST30-PE - 1855021 Dimensional drawing Contact insert 12/27/2015   Page 5 / 6 https://www.phoenixcontact.com/us/products/1855021 Contact insert - VC-D2-ST30-PE - 1855021 Dimensional drawing Panel cutout Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/27/2015   Page 6 / 6