1856184

https://www.phoenixcontact.com/us/products/1856184 PCB terminal block - MKDSP 50/ 3-17,5-F - 1856184 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, nominal current: 192 A, nom. voltage: 1000 V, pitch: 17.5 mm, number of positions: 3, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green Why buy this product  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Quick and convenient testing using integrated test option  Mounting flanges reduce the mechanical strain on the soldering spots  Integrated protective guide prevents incorrect insertion of the conductor underneath the tension sleeve Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626028996 Weight per Piece (excluding packing) 125.000 g Custom tariff number 85369010 Country of origin China Technical data Dimensions Length [ l ] 32 mm Pitch 17.5 mm Dimension a 35 mm Width [ w ] 80.2 mm 01/06/2018   Page 1 / 5 https://www.phoenixcontact.com/us/products/1856184 PCB terminal block - MKDSP 50/ 3-17,5-F - 1856184 Technical data Dimensions Constructional height 55 mm Height [ h ] 59 mm Solder pin [P] 4 mm Pin dimensions 1,4 x 1,4 mm Hole diameter 2.4 mm General Range of articles MKDSP 50/..-F Insulating material group I Rated surge voltage (III/3) 8 kV Rated surge voltage (III/2) 8 kV Rated surge voltage (II/2) 6 kV Rated voltage (III/3) 1000 V Rated voltage (III/2) 1000 V Rated voltage (II/2) 1000 V Connection in acc. with standard EN-VDE Nominal current IN 192 A Nominal cross section 70 mm² Maximum load current 192 A Insulating material PA Solder pin surface Sn Flammability rating according to UL 94 V0 Stripping length 20 mm Number of positions 3 Screw thread M6 Tightening torque, min 5.5 Nm Connection data Conductor cross section solid min. 1.5 mm² Conductor cross section solid max. 70 mm² Conductor cross section flexible min. 1.5 mm² Conductor cross section flexible max. 70 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 50 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 50 mm² Conductor cross section AWG min. 16 Conductor cross section AWG max. 2/0 01/06/2018   Page 2 / 5 https://www.phoenixcontact.com/us/products/1856184 PCB terminal block - MKDSP 50/ 3-17,5-F - 1856184 Technical data Connection data 2 conductors with same cross section, solid min. 1.5 mm² 2 conductors with same cross section, solid max. 16 mm² 2 conductors with same cross section, stranded min. 1.5 mm² 2 conductors with same cross section, stranded max. 25 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 16 mm² sleeve, max. Information on the aluminum conductor Cross section-torque-form of cable Cable cross section:50 mm²; Torque:5.5 Nm; Form of cable:sector-shaped, single-strand, class 1, α = 90°(se) Cable cross section:35 mm²; Torque:5.5 Nm; Form of cable:round, singlestrand, class 1(re) Cable cross section:25 mm²; Torque:5.5 Nm; Form of cable:round, singlestrand, class 1(re) Cable cross section:16 mm²; Torque:5.5 Nm; Form of cable:round, singlestrand, class 1(re) Specification DIN VDE 0276-603 (VDE 0276-603):2010-03 Note on conductor pretreatment The following measures are required for durable and reliable contacting of the aluminum conductor: the stripped end of the aluminum conductor must be separated from the oxide layer using a blade, and immediately dipped in non-acid and non-alkali Vaseline. The pretreatment must be repeated when connecting the conductors anew. Standards and Regulations Connection in acc. with standard EN-VDE Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 01/06/2018   Page 3 / 5 https://www.phoenixcontact.com/us/products/1856184 PCB terminal block - MKDSP 50/ 3-17,5-F - 1856184 Drilling diagram 4,2 Ø2,4 Current strength [A] 15,1 14,35 11,9 17,3 16 Ø5,7 5,4 Diagram 17,5 a 320 280 240 200 160 120 80 40 0 = 70 mm² = 50 mm² 0 10 5,7 20 30 40 50 60 70 80 90 100 110 Ambient temperature [°C] Type: MKDSP 50/..-17,5-F Dimensional drawing 12,7 a+19 P 55 32 11,9 16 14,4 a 5,7 Classifications eCl@ss eCl@ss 5.1 27141134 eCl@ss 6.0 27141134 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 5.0 EC002643 ETIM 6.0 EC002643 UNSPSC UNSPSC 13.2 39121432 Approvals Approvals Approvals cULus Recognized / VDE Zeichengenehmigung / IECEE CB Scheme / EAC 01/06/2018   Page 4 / 5 https://www.phoenixcontact.com/us/products/1856184 PCB terminal block - MKDSP 50/ 3-17,5-F - 1856184 Approvals Ex Approvals Approval details cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C mm²/AWG/kcmil 16-2/0 16-2/0 Nominal current IN 160 A 160 A Nominal voltage UN 600 V 600 V VDE Zeichengenehmigung    http://www.vde.com/en/Institute/OnlineService/ VDE-approved-products/Pages/Online-Search.aspx     mm²/AWG/kcmil 1.5-70 Nominal current IN 192 A Nominal voltage UN 1000 V IECEE CB Scheme    http://www.iecee.org/     mm²/AWG/kcmil 1.5-70 Nominal current IN 192 A Nominal voltage UN 1000 V EAC      E60425-19770427  40041859  DE1-55973  B.01742 Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 01/06/2018   Page 5 / 5