1884872

VARIOCON Modular Contact Inserts 1. Short Description 18 16 14 12 8 6 4 2 0 20 40 on l 0 in ec 10 60 80 100 10 9 8 7 6 5 4 3 2 1 0 120 Ambient temperature [°C] 0 20 40 60 80 9 8 7 6 5 4 3 2 1 0 20 40 60 80 100 120 Ambient temperature [°C] 10 0 100 Derating curve VC-TFS HC 8 / VC-AML 8/ VC-AMS 8 Derating curve VC-TFS 2 / VC-AML 2/ VC-AMS 2 Load current [A] Load current[A] po 20 om Load current [A] ne nt s. co m The modular contact inserts are based on the triedand-tested COMBICON technology. They are available with the screw connection system and on the equipment side also as a solder in version. The sleeve or mounting contact inserts are snapped into the correct frames and are then simple to assemble and mount. The modules are easy to unsnap with a screwdriver. All contact inserts can be equipped with coding profiles. This rules out the possibility of mixing up several plug connectors. The modules can be individually labeled using the corresponding marker cards SK... 120 Ambient temperature [°C] Derating curve VC-TFS HC 6 / VC-AML 6/ VC-AMS 6 Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.de VARIOCON Sleeve Contact Insert with Screw Terminal Blocks Number of positions Contact insert, for sleeve frames 2 6 8 Type Order No. Pcs./Pkt. VC-TFS 2 VC-TFS 6 VC-TFS 8 18 52 84 6 18 53 47 6 18 52 82 0 10 m Description CP-HCC 4 Coding section, for VC-...6/8, is inserted into the groove on the header, red insulating material CP-MSTB nt Technical data 20 400 III / 3 6/I 8 250 III / 3 4/I 8 160 III / 3 2.5 / I 0.2 - 4.0 / 0.2 - 1.5 24 - 12 / 24 - 16 0.14 - 1.5 / 0.14 - 1.5 28 - 16 / 28 - 16 0.14 - 1.5 / 0.14 - 1.5 28 - 16 / 28 - 16 0.2 - 2.5 / 0.2 - 1.5 24 - 14 / 24 - 16 0.25 - 1.5 24 - 16 0.5 - 2.5 20 - 14 PA V0 0.14 - 0.5 / 0.14 - 0.75 0.14 - 0.5 / 0.14 - 0.75 28 - 20 / 28 - 18 28 - 20 / 28 - 18 0.25 - 0.34 0.25 - 0.34 24 - 20 24 - 20 0.5 0.5 20 20 PA PA V0 V0 600 / 20 / 30-10 600 / 20 / 30-10 0.5 - 0.6 300 / 8 / 30-14 300 / 8 / 30-14 0.22 - 0.25 300 / 8 / 30-14 300 / 8 / 30-14 0.22 - 0.25 A/a A/a A/a 21,7 15 14,7 VC-TFS 2 7,5 21,7 15 26,6 26,6 26,6 15 100 VC-TFS 8 ne om in ec on l 30,6 17 34 63 4 VC-TFS 6 [kV] / – [mm2] / [mm2] AWG / AWG Multiple connection (2 conductors with same cross section) Solid / Stranded [mm2] / [mm2] AWG / AWG Stranded with ferrule without plastic sleeve [mm2] / [mm2] AWG / AWG Stranded with TWIN ferrule with plastic sleeve [mm2] / [mm2] AWG / AWG Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CUL) Nom. voltage / nom. current / conduc. cross sec. UL: [V] / [A] / AWG CUL: [V] / [A] / AWG Torque [Nm] Approvals 100 VC-TFS 2 [A] [V] po Design Technical data in accordance with IEC/ DIN VDE Rated current Rated voltage Surge voltage category / contamination class Rated surge voltage / insulation material group Connection capacity Solid / Stranded 16 00 02 7 s. Coding section, for VC-...2, is inserted into the groove on the connector and header, red insulating material co Accessories 8,3 5 VC-TFS 6 Phoenix Contact page 2 of 5 5 8,3 VC-TFS 8 3,5 VARIOCON Mounting Contact Insert with Screw Terminal Blocks Contact insert, for panel mounting frames 2 6 8 Type Order No. Pcs./Pkt. VC-AMS 2 VC-AMS 6 VC-AMS 8 18 53 52 8 18 54 01 9 18 54 02 2 10 CP-HCC 4 Coding section, for VC-...6/8, is inserted into the groove on the header, red insulating material CP-MSTB nt Technical data po 20 400 III / 3 6/I 8 250 III / 3 4/I 8 160 III / 3 2.5 / I 0.2 - 4.0 / 0.2 - 1.5 24 - 12 / 24 - 16 0.14 - 1.5 / 0.14 - 1.5 28 - 16 / 28 - 16 0.14 - 1.5 / 0.14 - 1.5 28 - 16 / 28 - 16 0.2 - 2.5 / 0.2 - 1.5 24 - 14 / 24 - 16 0.25 - 1.5 24 - 16 0.5 - 2.5 20 - 14 PA V0 0.14 - 0.5 / 0.14 - 0.75 0.14 - 0.5 / 0.14 - 0.75 28 - 20 / 28 - 18 28 - 20 / 28 - 18 0.25 - 0.34 0.25 - 0.34 24 - 20 24 - 20 0.5 0.5 20 20 PA PA V0 V0 600 / 20 / 30-10 600 / 20 / 30-10 0.5 - 0.6 300 / 8 / 30-14 300 / 8 / 30-14 0.22 - 0.25 300 / 8 / 30-14 300 / 8 / 30-14 0.22 - 0.25 A/a A/a A/a 15 13,9 34,6 15 5,5 5,5 22 13,9 2,4 34,6 2,4 om in ec 22 100 VC-AMS 8 [kV] / – on l 2,4 15 5,5 13,9 29,8 17 34 63 4 VC-AMS 6 [A] [V] [mm2] / [mm2] AWG / AWG Multiple connection (2 conductors with same cross section) Solid / Stranded [mm2] / [mm2] AWG / AWG Stranded with ferrule without plastic sleeve [mm2] / [mm2] AWG / AWG Stranded with TWIN ferrule with plastic sleeve [mm2] / [mm2] AWG / AWG Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CUL) Nom. voltage / nom. current / conduc. cross sec. UL: [V] / [A] / AWG CUL: [V] / [A] / AWG Torque [Nm] Approvals 100 VC-AMS 2 ne Design Technical data in accordance with IEC/ DIN VDE Rated current Rated voltage Surge voltage category / contamination class Rated surge voltage / insulation material group Connection capacity Solid / Stranded 16 00 02 7 s. Coding section, for VC-...2, is inserted into the groove on the connector and header, red insulating material co Accessories 22 Number of positions m Description 3,5 3,75 VC-AMS 2 7,5 3,75 2,5 VC-AMS 6 Phoenix Contact page 3 of 5 10 2,5 2,25 VC-AMS 8 10,5 2,25 VARIOCON Mounting Contact Insert with 90° Angled Solder-In Pins Number of positions Contact insert, for mounting panel frames 2 6 8 Type Order No. Pcs./Pkt. VC-AML 2 VC-AML 6 VC-AML 8 18 52 85 9 18 53 53 1 18 52 83 3 10 m Description CP-HCC 4 Coding section, for VC-...6/8, is inserted into the groove on the header, red insulating material CP-MSTB nt Technical data 20 400 III / 3 6/I PA V0 8 250 III / 3 4/I PA V0 8 160 III / 3 2.5 / I PA V0 600 / 20 / – 600 / 20 / – 300 / 8 / – 300 / 8 / – 300 / 8 / – 300 / 8 / – A/a A/a A/a 7 4 15,9 3,5 7,5 VC-AML 2 1,3 7,5 2,4 3,4 1,3 7,5 28,2 15 20,71 2,4 15 20,71 3,5 100 VC-AML 8 0.8 x 0.8 1.2 28,2 3,4 3,4 15,9 17 34 63 4 VC-AML 6 0.8 x 0.8 1.4 po om in ec on l 20,71 2,4 15 100 VC-AML 2 2 x 0.8 1.4 ne Design Dimensions solder-in pins [mm] x [mm] Hole diameter [mm] Technical data in accordance with IEC/ DIN VDE Rated current [A] Rated voltage [V] Surge voltage category / contamination class Rated surge voltage / insulation material group [kV] / – Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CUL) Nom. voltage / nom. current / conduc. cross sec. UL: [V] / [A] / AWG CUL: [V] / [A] / AWG Approvals 28,2 16 00 02 7 s. Coding section, for VC-...2, is inserted into the groove on the connector and header, red insulating material co Accessories 5 7 15,9 3,5 4 VC-AML 6 1,3 7,5 3,5 7 VC-AML 8 10,5 7,5 3,5 7 Drilling diagram VC-AML 2 7 Drilling diagram VC-AML 6 Phoenix Contact page 4 of 5 1,2 1,4 3,5 7,5 1,2 1,4 3,5 1,4 3,5 7,5 7,5 1,4 5 5 7 Drilling diagram VC-AML 8 4 VARIOCON Mounting Contact Insert with Straight Solder-In Pins Number of positions 2 6 8 Order No. Pcs./Pkt. VC-AMLV 2 VC-AMLV 6 VC-AMLV 8 18 84 97 9 18 84 87 2 18 84 88 5 10 CP-HCC 4 Coding section, for VC-...6/8, is inserted into the groove on the header, red insulating material CP-MSTB nt Technical data 20 400 III / 3 6/I PA V0 8 250 III / 3 4/I PA V0 8 160 III / 3 2.5 / I PA V0 600 / 20 / – 600 / 20 / – 300 / 8 / – 300 / 8 / – 300 / 8 / – 300 / 8 / – A/a A/a A/a po om 5 2,25 VC-AMLV 6 10,5 11,06 5 5 5,4 5,4 1,2 11,06 7,5 1,5 7,62 8,85 2,5 10,5 VC-AMLV 8 3,75 3,75 3,5 5,4 11,06 5 1,2 VC-AMLV 2 2,5 3,5 Drilling diagram VC-AMLV 2 Drilling diagram VC-AMLV 6 Phoenix Contact page 5 of 5 TNR: 5126138-01 5,4 11,06 Drilling diagram VC-AMLV 8  Phoenix Contact 21.03.03 3,3 7,5 3,3 3,75 15 20,71 15 28,6 20,71 28,6 28,5 3,6 7,62 8,85 100 VC-AMLV 8 0.8 x 0.8 1.2 2,4 2,4 15 17 34 63 4 VC-AMLV 6 0.8 x 0.8 1.4 in ec on l 20,71 100 VC-AMLV 2 2 x 0.8 1.4 ne Design Dimensions solder-in pins [mm] x [mm] Hole diameter [mm] Technical data in accordance with IEC/ DIN VDE Rated current [A] Rated voltage [V] Surge voltage category / contamination class1) Rated surge voltage / insulation material group [kV] / – Insulating material Inflammability class in acc. with UL 94 Approval data (UL and CUL) Nom. voltage / nom. current / conduc. cross sec. UL: [V] / [A] / AWG CUL: [V] / [A] / AWG Approvals 1 ) In the 2 and 6-pos. constellation, as well as in the 2 and 8-pos. versions, there is a reduction in the air and creepage distances. The contamination class is thus reduced to 2 and the surge voltage category to II. 2,4 16 00 02 7 s. Coding section, for VC-...2, is inserted into the groove on the connector and header, red insulating material co Accessories www.phoenixcontact.de Contact insert, for panel mounting frames Type m Description