https://www.phoenixcontact.com/us/products/1912320
Printed-circuit board connector - MVSTBR 2,5 HC/ 5-ST - 1912320
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PCB connector, nominal current: 16 A, rated voltage (III/2): 320 V, nominal cross section: 2.5 mm², number
of positions: 5, pitch: 5 mm, connection method: Screw connection with tension sleeve, color: green, contact
surface: Tin
The figure shows a 10-position
version of the product
Your advantages
Well-known connection principle allows worldwide use
Low temperature rise, thanks to maximum contact force
Allows connection of two conductors
Integrated double steel spring provides additional safety in the event of temperature and power fluctuations
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4017918192525
Weight per Piece (excluding packing)
11.100 g
Custom tariff number
85366990
Country of origin
Germany
Technical data
Item properties
Brief article description
Printed-circuit board connector
Plug-in system
POWER COMBICON 2,5
Type of contact
Female connector
Range of articles
MVSTBR 2,5 HC/..-ST
06/14/2020 Page 1 / 11
https://www.phoenixcontact.com/us/products/1912320
Printed-circuit board connector - MVSTBR 2,5 HC/ 5-ST - 1912320
Technical data
Item properties
Pitch
5 mm
Number of positions
5
Connection method
Screw connection with tension sleeve
Drive form screw head
Slotted (L)
Screw thread
M3
Locking
without
Number of levels
1
Number of connections
5
Number of potentials
5
Electrical parameters
Nominal current
16 A
Nom. voltage
320 V
Rated voltage
320 V
Rated voltage (III/2)
320 V
Rated voltage (II/2)
630 V
Rated surge voltage (III/3)
4 kV
Rated surge voltage (III/2)
4 kV
Rated surge voltage (II/2)
4 kV
Connection capacity
Connection method
Screw connection with tension sleeve
pluggable
Yes
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG / kcmil
24 ... 12
Conductor cross section flexible, with ferrule without plastic sleeve
0.25 mm² ... 2.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 2.5 mm²
2 conductors with same cross section, solid
0.2 mm² ... 1 mm²
2 conductors with same cross section, flexible
0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible, with ferrule without plastic
sleeve
0.25 mm² ... 1 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with
plastic sleeve
0.5 mm² ... 1.5 mm²
Cylindrical gauge a x b / diameter
2.8 mm x 2.0 mm / 2.4 mm
Stripping length
7 mm
Torque
0.5 Nm ... 0.6 Nm
Material data - contact
06/14/2020 Page 2 / 11
https://www.phoenixcontact.com/us/products/1912320
Printed-circuit board connector - MVSTBR 2,5 HC/ 5-ST - 1912320
Technical data
Material data - contact
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/
JEDEC JESD 201
Contact material
Cu alloy
Surface characteristics
hot-dip tin-plated
Metal surface terminal point (top layer)
Tin (5 - 7 µm Sn)
Metal surface contact area (top layer)
Tin (5 - 7 µm Sn)
Material data - housing
Housing color
green (6021)
Insulating material
PA
Insulating material group
I
CTI according to IEC 60112
600
Flammability rating according to UL 94
V0
Glow wire flammability index GWFI according to EN 60695-2-12
850
Glow wire ignition temperature GWIT according to EN 60695-2-13
775
Temperature for the ball pressure test according to EN 60695-10-2
125 °C
Dimensions for the product
Length [ l ]
12.6 mm
Width [ w ]
25 mm
Height [ h ]
26 mm
Pitch
5 mm
Height (without solder pin)
26 mm
Packaging information
Type of packaging
packed in cardboard
Pieces per package
50
Denomination packing units
Pcs.
General product information
Note
In accordance with IEC 61984, COMBICON connectors have no switching
power (COC). During designated use, they must not be plugged in or
disconnected when carrying voltage or under load.
In accordance with IEC 61984, COMBICON connectors have no switching
power (COC). During designated use, they must not be plugged in or
disconnected when carrying voltage or under load.
Ambient conditions
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 100 °C
Ambient temperature (operation)
-40 °C ... 100 °C (dependent on the derating curve)
06/14/2020 Page 3 / 11
https://www.phoenixcontact.com/us/products/1912320
Printed-circuit board connector - MVSTBR 2,5 HC/ 5-ST - 1912320
Technical data
Termination and connection method
Test for conductor damage and slackening
IEC 60999-1:1999-11
Test passed
Pull-out test
Pull-out test
IEC 60999-1:1999-11
Test passed
Conductor cross section / conductor type / tensile force
0.2 mm² / solid / > 10 N
0.2 mm² / flexible / > 10 N
2.5 mm² / solid / > 50 N
2.5 mm² / flexible / > 50 N
Mechanical tests according to standard
Test specification
IEC 61984
Visual examination
Test passed IEC 60512-1-1:2002-02
Dimensional test
Test passed IEC 60512-1-2:2002-02
Resistance of marking
Test passed IEC 60068-2-70:1995-12
Result
Test passed
Specification
IEC 60512-13-2:2006-02
No. of cycles
50
Insertion strength per pos. approx.
7N
Withdraw strength per pos. approx.
5N
Polarization and coding
Test passed IEC 60512-13-5:2006-02
Result
Test passed
Specification
IEC 60512-15-1:2008-05
Test force per pos.
21 N
Air clearances and creepage distances
Clearances and creepage distances
IEC 60664-1:2007-04
Specification
IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3)
3 mm
Minimum clearance - inhomogeneous field (III/2)
3 mm
Minimum clearance - inhomogeneous field (II/2)
3 mm
Minimum creepage distance value (III/3)
4 mm
Minimum creepage distance value (III/2)
1.6 mm
Minimum creepage distance value (II/2)
3.2 mm
Current carrying capacity / derating curves
Specification
IEC 61984
Mechanical tests (A)
06/14/2020 Page 4 / 11
https://www.phoenixcontact.com/us/products/1912320
Printed-circuit board connector - MVSTBR 2,5 HC/ 5-ST - 1912320
Technical data
Mechanical tests (A)
Test specification
IEC 61984
Insertion strength per pos. approx.
7N
Withdraw strength per pos. approx.
5N
Polarization when inserted requirement >20 N
Test passed
Contact holder in insert requirements >20 N
Test passed
Durability tests (B)
Specification
IEC 60512-9-1:2010-03
Contact resistance R1
0.8 mΩ
Insertion/withdrawal cycles
50
Contact resistance R2
1 mΩ
Impulse withstand voltage at sea level
4.8 kV
Power-frequency withstand voltage
2.21 kV
Insulation resistance, neighboring positions
> 0.6 TΩ
Climatic tests (D)
Specification
ISO 6988:1985-02
Cold stress
-40 °C/2 h
Thermal stress
100 °C/168 h
Corrosive stress
0.2 dm SO2 on 300 dm /40 °C/1 cycle
Impulse withstand voltage at sea level
4.8 kV
Power-frequency withstand voltage
2.21 kV
3
3
Environmental and durability tests (E)
Specification
IEC 61984:2008-10
Result, degree of protection, IP code
Finger safety with IP20 test finger
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
06/14/2020 Page 5 / 11
https://www.phoenixcontact.com/us/products/1912320
Printed-circuit board connector - MVSTBR 2,5 HC/ 5-ST - 1912320
Diagram
Type: MVSTBR 2,5 HC/..-ST with MSTBVA 2,5 HC/..-G
Diagram
Type: MVSTBR 2,5 HC/...-ST with MSTBA 2,5 HC/...-G
06/14/2020 Page 6 / 11
https://www.phoenixcontact.com/us/products/1912320
Printed-circuit board connector - MVSTBR 2,5 HC/ 5-ST - 1912320
Dimensional drawing
Classifications
eCl@ss
eCl@ss 10.0.1
27440309
eCl@ss 4.0
27260700
eCl@ss 4.1
27260700
eCl@ss 5.0
27260700
eCl@ss 5.1
27260700
eCl@ss 6.0
27260700
eCl@ss 7.0
27440309
eCl@ss 8.0
27440309
eCl@ss 9.0
27440309
ETIM
ETIM 3.0
EC001121
ETIM 4.0
EC002638
ETIM 5.0
EC002638
ETIM 6.0
EC002638
06/14/2020 Page 7 / 11
https://www.phoenixcontact.com/us/products/1912320
Printed-circuit board connector - MVSTBR 2,5 HC/ 5-ST - 1912320
Classifications
ETIM
ETIM 7.0
EC002638
UNSPSC
UNSPSC 6.01
30211810
UNSPSC 7.0901
39121409
UNSPSC 11
39121409
UNSPSC 12.01
39121409
UNSPSC 13.2
39121409
UNSPSC 18.0
39121409
UNSPSC 19.0
39121409
UNSPSC 20.0
39121409
UNSPSC 21.0
39121409
Approvals
Approvals
Approvals
IECEE CB Scheme / EAC / cULus Recognized / VDE Zeichengenehmigung
Ex Approvals
Approval details
IECEE CB Scheme
http://www.iecee.org/
Nominal voltage UN
250 V
Nominal current IN
16 A
mm²/AWG/kcmil
0.2-2.5
EAC
DE1-60988-B1B2
B.01687
06/14/2020 Page 8 / 11
https://www.phoenixcontact.com/us/products/1912320
Printed-circuit board connector - MVSTBR 2,5 HC/ 5-ST - 1912320
Approvals
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
D
Nominal voltage UN
300 V
300 V
Nominal current IN
16 A
10 A
mm²/AWG/kcmil
30-12
30-12
VDE Zeichengenehmigung
http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx
Nominal voltage UN
250 V
Nominal current IN
16 A
mm²/AWG/kcmil
0.2-2.5
E60425-19931011
40050079
Accessories
Accessories
Coding element
Coding profile - CP-MSTB - 1734634
Coding profile, is inserted into the slot on the plug or inverted header, red insulating material
Labeled terminal marker
Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183
Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting
type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm
Screwdriver tools
06/14/2020 Page 9 / 11
https://www.phoenixcontact.com/us/products/1912320
Printed-circuit board connector - MVSTBR 2,5 HC/ 5-ST - 1912320
Accessories
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Terminal marking
Marker card - SK U/3,8 WH:UNBEDRUCKT - 0803906
Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems,
mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm, Number of individual labels:
1440
Marker card - SK 5/3,8:UNBEDRUCKT - 0805409
Marker card, Card, white, unlabeled, can be labeled with: Marker pen, mounting type: adhesive, for terminal block width:
5 mm, lettering field size: 5 x 3.8 mm
Additional products
Feed-through header - MSTBA 2,5 HC/ 5-G - 1923788
PCB headers, nominal current: 16 A, rated voltage (III/2): 320 V, nominal cross section: 2.5 mm², number of positions: 5,
pitch: 5 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.5
mm
Feed-through header - MSTBVA 2,5 HC/ 5-G - 1924224
PCB headers, nominal current: 16 A, rated voltage (III/2): 320 V, nominal cross section: 2.5 mm², number of positions: 5,
pitch: 5 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.9
mm
06/14/2020 Page 10 / 11
https://www.phoenixcontact.com/us/products/1912320
Printed-circuit board connector - MVSTBR 2,5 HC/ 5-ST - 1912320
Accessories
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
06/14/2020 Page 11 / 11
