https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
1-level terminal block with double connection on one side, cross section: 0.2 - 4 mm², AWG: 24 - 12, width:
6.2 mm, color: gray
Your advantages
These twin modular terminal blocks are designed for the basic task of potential branching
Universal foot for mounting on NS 35.. or NS 32... DIN rails
Two independent conductor connections can be used on the control cabinet side
Easy connection of different types of conductors with different cross sections
Can be bridged in the terminal center, even with neighboring feed-through terminal blocks aligned
Key Commercial Data
Packing unit
50 pc
Minimum order quantity
50 pc
GTIN
GTIN
4017918052423
Weight per Piece (excluding packing)
12.600 g
Custom tariff number
85369010
Country of origin
China
Technical data
General
Number of levels
2
Number of connections
3
Potentials
1
Nominal cross section
4 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V2
09/24/2020 Page 1 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Technical data
General
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Maximum load current
32 A (in case of a 4 mm² conductor cross section, the maximum load
current must not be exceeded by the total current of all connected
conductors.)
Nominal current IN
32 A (with 4 mm² conductor cross section)
Nominal voltage UN
500 V (With tightened clamping screws)
Open side panel
Yes
Ambient temperature (operation)
-60 °C ... 85 °C
Ambient temperature (storage/transport)
-25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
7.2 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x
conductor connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 (+/- 2) rpm
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
1.5 mm² / 0.4 kg
4 mm² / 0.9 kg
Tensile test result
Test passed
Conductor cross section tensile test
0.2 mm²
Tractive force setpoint
10 N
Conductor cross section tensile test
1.2 mm²
Tractive force setpoint
40 N
Conductor cross section tensile test
4 mm²
Tractive force setpoint
60 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 32/NS 35
Setpoint
1N
09/24/2020 Page 2 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Technical data
General
Result of voltage-drop test
Test passed
Requirements, voltage drop
U1 ≤ 3,2 mV
U2 ≤ 1,5 x U1
dT ≤ 45 K
Result of temperature-rise test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short circuit stability result
Test passed
Conductor cross section short circuit testing
4000000 mm²
Short-time current
0.00048 kA
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s ) /Hz
Acceleration
3.12 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock form
Half-sine
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE
0304-21))
130 °C
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
2 2
Dimensions
Width
6.2 mm
End cover width
2 mm
Length
50.5 mm
Height
38 mm
09/24/2020 Page 3 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Technical data
Dimensions
Height NS 35/7,5
47 mm
Height NS 35/15
54.5 mm
Height NS 32
52 mm
Connection data
Connection
1 level
Connection method
Screw connection
Screw thread
M3
Stripping length
8 mm
Tightening torque, min
0.6 Nm
Tightening torque max
0.8 Nm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
4 mm²
Min. AWG conductor cross section, flexible
24
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Cross section with insertion bridge, solid max.
4 mm²
Cross section with insertion bridge, stranded max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN
ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN
ferrules, with plastic sleeve, maximum
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and
without plastic sleeve, minimum
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and
without plastic sleeve, maximum
1.5 mm²
Connection in acc. with standard
IEC/EN 60079-7
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
09/24/2020 Page 4 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Technical data
Connection data
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
4 mm²
Internal cylindrical gage
A4
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
IEC/EN 60079-7
Flammability rating according to UL 94
V2
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 10.0.1
27141120
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
09/24/2020 Page 5 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Classifications
ETIM
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Approvals
Approvals
Approvals
DNV GL / CSA / NK / UL Recognized / KEMA-KEUR / cUL Recognized / IECEE CB Scheme / EAC / EAC / cULus Recognized
Ex Approvals
ATEX / UL Recognized / cUL Recognized / EAC Ex / cULus Recognized
Approval details
DNV GL
https://approvalfinder.dnvgl.com/
TAE00001CT
CSA
http://www.csagroup.org/services-industries/product-listing/
13631
Nominal voltage UN
300 V
Nominal current IN
30 A
mm²/AWG/kcmil
22-10
09/24/2020 Page 6 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Approvals
NK
UL Recognized
http://www.classnk.or.jp/hp/en/
09 ME 141
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
B
C
Nominal voltage UN
300 V
150 V
Nominal current IN
35 A
35 A
mm²/AWG/kcmil
30-10
30-10
KEMA-KEUR
http://www.dekra-certification.com
Nominal voltage UN
500 V
Nominal current IN
32 A
mm²/AWG/kcmil
4
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
300 V
300 V
Nominal current IN
35 A
30 A
mm²/AWG/kcmil
30-10
30-10
IECEE CB Scheme
http://www.iecee.org/
Nominal voltage UN
500 V
Nominal current IN
32 A
mm²/AWG/kcmil
4
EAC
71-107963
FILE E 60425
NL-59393
RU CDE.A*30.B.01742
09/24/2020 Page 7 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Approvals
EAC
cULus Recognized
RU CDE.BL08.B.00534
Accessories
Accessories
Bridge
Fixed bridge - FB-150 METER - 0201595
Cross connection rail, for fixed bridging of identical inputs and outputs, made of Cu, nickel-plated, 1 m long
DIN rail
DIN rail perforated - NS 32 PERF 2000MM - 1201002
DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015
DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
09/24/2020 Page 8 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Accessories
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
09/24/2020 Page 9 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Accessories
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
09/24/2020 Page 10 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Accessories
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
galvanized, length: 2000 mm, color: silver
09/24/2020 Page 11 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Accessories
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:
gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
09/24/2020 Page 12 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Accessories
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-UK 5-TWIN - 1923034
End cover, length: 50 mm, width: 2 mm, height: 36 mm, color: gray
Cover segment - UK 5-TWIN DECKELSEGMENT - 1923089
End cover segment, for covering multi-conductor terminal blocks when two-conductor terminal blocks are aligned,
color: Gray
Insertion bridge
09/24/2020 Page 13 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Accessories
Insertion bridge - EB 3- 6 - 0201142
Insertion bridge, pitch: 6.2 mm, number of positions: 3, color: gray
Insertion bridge - EB 2- 6 - 0201155
Insertion bridge, pitch: 6.2 mm, number of positions: 2, color: gray
Insertion bridge - EB 10- 6 - 0201139
Insertion bridge, pitch: 6.2 mm, number of positions: 10, color: gray
Insulating sleeve
Bridge bar isolator - IS-K 4 - 1302338
Bridge bar isolator, color: gray
Labeled terminal marker
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual
labels: 10
09/24/2020 Page 14 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Accessories
Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width:
6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width:
6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical
numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering
field size: 6.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N,
PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field
size: 6.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks - ZB 6,LGS:U-N - 1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V,
W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering
field size: 6.15 x 10.5 mm, Number of individual labels: 10
09/24/2020 Page 15 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Accessories
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of
individual labels: 80
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of
individual labels: 60
Partition plate
Separating plate - TS-K - 1302215
Separating plate, length: 22 mm, width: 0.5 mm, height: 22 mm, color: gray
Screw bridge
Jumper - ISSBI 10- 6 - 0301505
Jumper, pitch: 6 mm, number of positions: 10, color: silver
Jumper - LB 10-6 BU - 0202280
Jumper, pitch: 6 mm, number of positions: 10, color: blue
09/24/2020 Page 16 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Accessories
Jumper - LB 10-6 GY - 0202358
Jumper, pitch: 6 mm, number of positions: 10, color: gray
Jumper - LB 100-6 GY - 0202345
Jumper, pitch: 6 mm, number of positions: 100, color: gray
Jumper - LB 100-6 RD - 0202316
Jumper, number of positions: 100, color: red
Jumper - LB 100-6 BU - 0202303
Jumper, number of positions: 100, color: blue
Jumper - LB 10-6 RD - 0202293
Jumper, pitch: 6 mm, number of positions: 10, color: red
09/24/2020 Page 17 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Accessories
Fixed bridge - FBI 100- 6 - 0201650
Fixed bridge, pitch: 6.2 mm, number of positions: 100, color: silver
Fixed bridge - FBI 10- 6 - 0203250
Fixed bridge, pitch: 6.2 mm, number of positions: 10, color: silver
Fixed bridge - FBI 20- 6 - 0201867
Fixed bridge, pitch: 6.2 mm, number of positions: 20, color: silver
Short-circuit connector
Short-circuit connector - KSS 3- 6 - 0309523
Short-circuit connector, pitch: 6 mm, number of positions: 3, color: black
Short-circuit connector - KSS 6 - 0301547
Short-circuit connector, pitch: 6 mm, number of positions: 2, color: black
Switching jumper
09/24/2020 Page 18 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Accessories
Switching jumper - USBRJ 2-7 - 2305538
Switching jumper, number of positions: 2, color: silver
Switching jumper - USBR 2-7 - 2303239
Switching jumper, pitch: 7 mm, number of positions: 2, color: silver
Terminal marking
Marker card - SBS 6:UNBEDRUCKT - 1007222
Marker card, Card, white, unlabeled, can be labeled with: Marker pen, mounting type: snap into tall marker groove,
snap into flat marker groove, for terminal block width: 6 mm, lettering field size: 6 x 6.1 mm, Number of individual
labels: 250
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of
individual labels: 10
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80
09/24/2020 Page 19 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Accessories
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field
size: 5.6 x 10.5 mm, Number of individual labels: 60
Test plug terminal block
Test plugs - PS-UK 2,5 B/Z-6 - 3001239
Test plugs, color: red
Test plugs - PS-UK 2,5 B/E - 3001132
Test plugs, color: red
Reducing plug - RPS - 0201647
Reducing plug, color: gray
Test socket
Female test connector - PSBJ 3/13/4 - 0201304
Female test connector, color: silver
09/24/2020 Page 20 / 21
https://www.phoenixcontact.com/gb/products/1923021
Feed-through terminal block - UK 5-TWIN - 1923021
Accessories
Female test connector - PSB 3/10/4 - 0601292
Female test connector, color: silver
Warning label printed
Warning label - WS 5- 6 - 1004403
Warning plate, with 2 plastic screws, across 5 terminal blocks, pitch 6 mm
Warning label - WS 4- 6 - 1004209
Warning plate, with 2 plastic screws, across 4 terminal blocks, pitch 6 mm
Warning label - WS 3- 6 - 1004115
Warning plate, with 2 plastic screws, across 3 terminal blocks, pitch 6 mm
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
09/24/2020 Page 21 / 21
