https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
1-level terminal block with double connection on one side, cross section: 0.2 - 4 mm², AWG: 24 - 12, width: 6.2
mm, color: Red
The figure shows a version of the
article
Key commercial data
Packing unit
11
Weight per Piece (excluding packing)
12.35 GRM
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
2
Number of connections
3
Color
red
Insulating material
PA
Inflammability class according to UL 94
V2
Maximum load current
32 A (with 4 mm² conductor cross section)
Rated surge voltage
6 kV
Pollution degree
3
Surge voltage category
III
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
32 A (the maximum load current must not be exceeded by the total current
of all connected conductors)
18.11.2013 Page 1 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Technical data
General
Nominal voltage UN
500 V (With tightened clamping screws)
Open side panel
ja
Number of positions
1
Dimensions
Width
6.2 mm
Length
50.5 mm
Height NS 35/7,5
47 mm
Height NS 35/15
54.5 mm
Height NS 32
52 mm
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG/kcmil min.
24
Conductor cross section AWG/kcmil max
12
Conductor cross section stranded min.
0.2 mm²
Conductor cross section stranded max.
4 mm²
Min. AWG conductor cross section, stranded
24
Max. AWG conductor cross section, stranded
12
Conductor cross section stranded, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
1.5 mm²
sleeve, max.
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
Cross section with insertion bridge, solid max.
4 mm²
Cross section with insertion bridge, stranded max.
4 mm²
Connection method
Screw connection
Stripping length
8 mm
18.11.2013 Page 2 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Technical data
Connection data
Internal cylindrical gage
A4
Screw thread
M3
Tightening torque, min
0.6 Nm
Tightening torque max
0.8 Nm
Classifications
eCl@ss
eCl@ss 4.0
27141120
eCl@ss 4.1
27141120
eCl@ss 5.0
27141120
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
CSA / UL Recognized / cUL Recognized / GL / cULus Recognized
18.11.2013 Page 3 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Approvals
Ex Approvals
ATEX / UL Recognized / cUL Recognized / cULus Recognized
Approvals submitted
Approval details
CSA
mm²/AWG/kcmil
22-10
Nominal current IN
30 A
Nominal voltage UN
300 V
UL Recognized
mm²/AWG/kcmil
30-10
Nominal current IN
35 A
Nominal voltage UN
150 V
cUL Recognized
mm²/AWG/kcmil
30-10
Nominal current IN
35 A
Nominal voltage UN
150 V
GL
cULus Recognized
18.11.2013 Page 4 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Accessories
Accessories
Bridge
Fixed bridge - FB-150 METER - 0201595
Cross connection rail, for fixed bridging of identical inputs and outputs, made of Cu, nickel-plated, 1 m long
Jumper - LB 10-6 GY - 0202358
Jumper, Number of positions: 10, Color: gray
Jumper - LB 100-6 GY - 0202345
Jumper, Number of positions: 100, Color: gray
Jumper - LB 100-6 RD - 0202316
Jumper, Number of positions: 100, Color: red
Jumper - LB 100-6 BU - 0202303
Jumper, Number of positions: 100, Color: blue
18.11.2013 Page 5 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Accessories
Jumper - LB 10-6 RD - 0202293
Jumper, Number of positions: 10, Color: red
Jumper - LB 10-6 BU - 0202280
Jumper, Number of positions: 10, Color: blue
Fixed bridge - FBI 100- 6 - 0201650
Fixed bridge, Number of positions: 100, Color: silver
Fixed bridge - FBI 10- 6 - 0203250
Fixed bridge, Number of positions: 10, Color: silver
Fixed bridge - FBI 20- 6 - 0201867
Fixed bridge, Number of positions: 20, Color: silver
18.11.2013 Page 6 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Accessories
Insertion bridge - EB 3- 6 - 0201142
Insertion bridge, Number of positions: 3, Color: gray
Insertion bridge - EB 2- 6 - 0201155
Insertion bridge, Number of positions: 2, Color: gray
Insertion bridge - EB 10- 6 - 0201139
Insertion bridge, Number of positions: 10, Color: gray
Switching jumper - USBRJ 2-7 - 2305538
Switching jumper, Color: silver
Switching jumper - USBR 2-7 - 2303239
Switching jumper, Number of positions: 2, Color: silver
End block
18.11.2013 Page 7 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Accessories
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
18.11.2013 Page 8 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Accessories
End cover - D-UK 5-TWIN - 1923034
End cover, Length: 50 mm, Width: 2 mm, Height: 36 mm, Color: gray
Cover segment - UK 5-TWIN DECKELSEGMENT - 1923089
End cover segment, for covering multi-conductor terminal blocks when two-conductor terminal blocks are aligned, color:
Gray
Insulating sleeve
Bridge bar isolator - IS-K 4 - 1302338
Bridge bar isolator, Color: gray
Bridge bar isolator - ISSBI 10- 6 - 0301505
Bridge bar isolator, Number of positions: 10, Color: silver
Labeled terminal marker
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into
tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
18.11.2013 Page 9 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Accessories
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Mounting rail
DIN rail - NS 32 PERF 2000MM - 1201002
G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m
DIN rail - NS 32 UNPERF 2000MM - 1201015
G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
18.11.2013 Page 10 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Accessories
DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
18.11.2013 Page 11 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Accessories
DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
18.11.2013 Page 12 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Accessories
DIN rail - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
18.11.2013 Page 13 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Accessories
DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
Partition plate
Separating plate - TS-K - 1302215
Separating plate, Length: 22 mm, Height: 22 mm, Color: gray
Short-circuit connector
Short-circuit connector - KSS 3- 6 - 0309523
Short-circuit connector, Number of positions: 3, Color: black
18.11.2013 Page 14 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Accessories
Short-circuit connector - KSS 6 - 0301547
Short-circuit connector, Number of positions: 2, Color: black
Terminal marking
Marker cards - SBS 6:UNBEDRUCKT - 1007222
Marker cards, Card, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, Snap
into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 6 x 6.1 mm
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For
terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 6.2
mm, Lettering field: 5.6 x 10.5 mm
18.11.2013 Page 15 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Accessories
Test plug terminal block
Test plugs - PS-UK 2,5 B/Z-6 - 3001239
Test plugs, Length: 19.6 mm, Width: 5 mm, Color: red
Test plugs - PS-UK 2,5 B/E - 3001132
Test plugs, Color: red
Reducing plug - RPS - 0201647
Reducing plug, Color: gray
Test socket
Female test connector - PSBJ 3/13/4 - 0201304
Female test connector, Color: silver
Female test connector - PSB 3/10/4 - 0601292
Female test connector, Color: silver
18.11.2013 Page 16 / 17
https://www.phoenixcontact.com/us/products/1923157
Feed-through terminal block - UK 5-TWIN RD - 1923157
Accessories
Warning label printed
Warning label - WS 5- 6 - 1004403
Warning plate, with 2 plastic screws, across 5 terminal blocks, pitch 6 mm
Warning label - WS 4- 6 - 1004209
Warning plate, with 2 plastic screws, across 4 terminal blocks, pitch 6 mm
Warning label - WS 3- 6 - 1004115
Warning plate, with 2 plastic screws, across 3 terminal blocks, pitch 6 mm
Drawings
Circuit diagram
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com
18.11.2013 Page 17 / 17
