1925870

https://www.phoenixcontact.com/us/products/1925870 Printed-circuit board connector - FKIC 2,5/ 3-ST-5,08-RN - 1925870 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug component, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 3, pitch: 5.08 mm, connection method: Push-in spring connection, color: green, contact surface: Tin, Article with engagement nose The figure shows a 10-position version of the product Why buy this product  Time saving push-in connection, tools not required  Intuitive use through colour coded actuation lever  Inverted connector with pin contacts for touch-proof device outputs or free-hanging cable/cable connections  Intuitive locking mechanism prevents accidental disconnection  Can be combined with the MSTB 2´,5 range Key Commercial Data Packing unit 1 STK GTIN GTIN 4017918819934 Weight per Piece (excluding packing) 5.370 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Length [ l ] 27 mm Width [ w ] 17.24 mm Height [ h ] 15 mm Pitch 5.08 mm 01/08/2018   Page 1 / 6 https://www.phoenixcontact.com/us/products/1925870 Printed-circuit board connector - FKIC 2,5/ 3-ST-5,08-RN - 1925870 Technical data Dimensions Dimension a 10.16 mm General Range of articles FKIC 2,5/..-ST-RN Type of contact Male connector Number of positions 3 Connection method Push-in spring connection Insulating material group I Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/3) 320 V Rated voltage (III/2) 320 V Rated voltage (II/2) 630 V Connection in acc. with standard EN-VDE Nominal current IN 12 A Nominal cross section 2.5 mm² Maximum load current 12 A Insulating material PA Flammability rating according to UL 94 V0 Internal cylindrical gage A2 Stripping length 10 mm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1 mm² sleeve, max. Minimum AWG according to UL/CUL 26 01/08/2018   Page 2 / 6 https://www.phoenixcontact.com/us/products/1925870 Printed-circuit board connector - FKIC 2,5/ 3-ST-5,08-RN - 1925870 Technical data Connection data Maximum AWG according to UL/CUL 12 General information Note In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. Standards and Regulations Connection in acc. with standard EN-VDE CUL Flammability rating according to UL 94 V0 Note In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Dimensional drawing Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27260701 eCl@ss 5.1 27260701 eCl@ss 6.0 27260704 eCl@ss 7.0 27440402 eCl@ss 8.0 27440309 01/08/2018   Page 3 / 6 https://www.phoenixcontact.com/us/products/1925870 Printed-circuit board connector - FKIC 2,5/ 3-ST-5,08-RN - 1925870 Classifications eCl@ss eCl@ss 9.0 27440309 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002638 ETIM 5.0 EC002638 ETIM 6.0 EC002638 UNSPSC UNSPSC 6.01 30211810 UNSPSC 7.0901 39121409 UNSPSC 11 39121409 UNSPSC 12.01 39121409 UNSPSC 13.2 39121409 Approvals Approvals Approvals VDE Gutachten mit Fertigungsüberwachung / IECEE CB Scheme / EAC / cULus Recognized Ex Approvals Approval details VDE Gutachten mit Fertigungsüberwachung    http://www.vde.com/en/Institute/OnlineService/ VDE-approved-products/Pages/Online-Search.aspx     mm²/AWG/kcmil 0.2-2.5 Nominal current IN 12 A Nominal voltage UN 250 V  40004701 01/08/2018   Page 4 / 6 https://www.phoenixcontact.com/us/products/1925870 Printed-circuit board connector - FKIC 2,5/ 3-ST-5,08-RN - 1925870 Approvals IECEE CB Scheme    http://www.iecee.org/     mm²/AWG/kcmil 0.2-2.5 Nominal current IN 12 A Nominal voltage UN 250 V  DE1-58978-B1B2 EAC      B.01742 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-19931011   B D mm²/AWG/kcmil 26-12 26-12 Nominal current IN 10 A 10 A Nominal voltage UN 300 V 300 V Accessories Accessories Coding element Coding star - CR-MSTB - 1734401 Coding section, inserted into the recess in the header or the inverted plug, red insulating material     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     01/08/2018   Page 5 / 6 https://www.phoenixcontact.com/us/products/1925870 Printed-circuit board connector - FKIC 2,5/ 3-ST-5,08-RN - 1925870 Accessories Test plug terminal block Reducing plug - RPS - 0201647 Reducing plug, color: gray     Strain relief - STZ 8-FKC-5,08 - 1876880 Strain relief for snapping into the latching chambers of the plug components, 8-pos.     Strain relief - STZ 4-FKC-5,08 - 1876877 Strain relief for snapping into the latching chambers of the plugs, 4-pos.     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 01/08/2018   Page 6 / 6