1935200

https://www.phoenixcontact.com/us/products/1935200 PCB terminal block - PT 1,5/ 6-5,0-H - 1935200 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, nominal current: 17.5 A, pitch: 5 mm, number of positions: 6, connection method: Screw connection with wire protector, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green The figure shows a 10-position version of the product Your advantages  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  High terminal block capacity thanks to rectangular terminal block space  Allows connection of two conductors  The latching on the side enables various numbers of positions to be combined Key Commercial Data Packing unit 1 pc Minimum order quantity 100 pc GTIN GTIN 4017918916978 Weight per Piece (excluding packing) 6.000 g Custom tariff number 85369010 Country of origin China Technical data Dimensions Length [ l ] 9 mm Pitch 5 mm Dimension a 25 mm 09/06/2019   Page 1 / 9 https://www.phoenixcontact.com/us/products/1935200 PCB terminal block - PT 1,5/ 6-5,0-H - 1935200 Technical data Dimensions Width [ w ] 30 mm Height 11.4 mm Height [ h ] 14.9 mm Solder pin [P] 3.5 mm Pin spacing 5 mm Hole diameter 1.3 mm General Range of articles PT 1,5/..-H Insulating material group I Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/3) 250 V Rated voltage (III/2) 400 V Rated voltage (II/2) 630 V Connection in acc. with standard EN-VDE Nominal current IN 17.5 A Nominal cross section 1.5 mm² Maximum load current 17.5 A Insulating material PA Flammability rating according to UL 94 V0 Internal cylindrical gage A1 Stripping length 5 mm Number of positions 6 Screw thread M2,6 Tightening torque, min 0.35 Nm Tightening torque max 0.4 Nm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm² 09/06/2019   Page 2 / 9 https://www.phoenixcontact.com/us/products/1935200 PCB terminal block - PT 1,5/ 6-5,0-H - 1935200 Technical data Connection data Conductor cross section AWG min. 26 Conductor cross section AWG max. 14 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 0.75 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 0.75 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 0.34 mm² The technical data regarding clamping with ferrules applies only when using crimping pliers ZA 3. When using ferrules, it is necessary to take into account possible restrictions regarding nominal voltage. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 0.75 mm² The technical data regarding clamping with ferrules applies only 2 conductors with same cross section, stranded, TWIN ferrules with plastic when using crimping pliers ZA 3. When using ferrules, it is necessary to sleeve, max. take into account possible restrictions regarding nominal voltage. Standards and Regulations Connection in acc. with standard EN-VDE CUL Flammability rating according to UL 94 V0 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 09/06/2019   Page 3 / 9 https://www.phoenixcontact.com/us/products/1935200 PCB terminal block - PT 1,5/ 6-5,0-H - 1935200 Drilling diagram 09/06/2019   Page 4 / 9 https://www.phoenixcontact.com/us/products/1935200 PCB terminal block - PT 1,5/ 6-5,0-H - 1935200 Diagram Derating diagram for 5 pins;reduction factor=1 Dimensional drawing 09/06/2019   Page 5 / 9 https://www.phoenixcontact.com/us/products/1935200 PCB terminal block - PT 1,5/ 6-5,0-H - 1935200 Classifications eCl@ss eCl@ss 4.0 27260700 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27261100 eCl@ss 6.0 27261100 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 ETIM 6.0 EC002643 ETIM 7.0 EC002643 UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 34131203 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 Approvals Approvals Approvals IECEE CB Scheme / SEV / VDE Gutachten mit Fertigungsüberwachung / EAC / cULus Recognized / CCA Ex Approvals Approval details 09/06/2019   Page 6 / 9 https://www.phoenixcontact.com/us/products/1935200 PCB terminal block - PT 1,5/ 6-5,0-H - 1935200 Approvals IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 250 V Nominal current IN 24 A mm²/AWG/kcmil 0.2-2.5 SEV    https://www.electrosuisse.ch/de/meta/shop/produktezertifikate.html     Nominal voltage UN 250 V Nominal current IN 16 A mm²/AWG/kcmil 2.5 VDE Gutachten mit Fertigungsüberwachung   DE1-61760   http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 250 V Nominal current IN 24 A mm²/AWG/kcmil 0.2-2.5  IK-3558-M2  40031691 EAC      B.01742 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-20030211   B D Nominal voltage UN 300 V 300 V Nominal current IN 18 A 10 A mm²/AWG/kcmil 26-12 26-12 09/06/2019   Page 7 / 9 https://www.phoenixcontact.com/us/products/1935200 PCB terminal block - PT 1,5/ 6-5,0-H - 1935200 Approvals CCA        Nominal voltage UN 250 V Nominal current IN 24 A mm²/AWG/kcmil 0.2-2.5  CCA/DE1 34714 Accessories Accessories Crimping tool Crimping pliers - CRIMPFOX CENTRUS 6S - 1213144 Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² … 6 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection     Crimping pliers - CRIMPFOX 6 - 1212034 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp     Labeled terminal marker Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm     Screwdriver tools 09/06/2019   Page 8 / 9 https://www.phoenixcontact.com/us/products/1935200 PCB terminal block - PT 1,5/ 6-5,0-H - 1935200 Accessories Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/06/2019   Page 9 / 9