https://www.phoenixcontact.com/us/products/1943593
Printed-circuit board connector - ICV 2,5 HC/ 8-G-5,08 - 1943593
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PCB headers, nominal current: 16 A, rated voltage (III/2): 320 V, nominal cross section: 2.5 mm², number of
positions: 8, pitch: 5.08 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear
pinning, solder pin [P]: 3.6 mm, COMBICON connectors may only be activated under no load conditions. If for
operating reasons small loads must be switched, experimental values are available upon request.
The figure shows a 10-position
version of the product
Your advantages
Well-known mounting principle allows worldwide use
Inverted header with socket contacts for touch-proof device outputs or PCB/PCB connections
Integrated double steel spring provides additional safety in the event of temperature and power fluctuations
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4017918881382
Weight per Piece (excluding packing)
8.460 g
Custom tariff number
85366930
Country of origin
Germany
Technical data
Item properties
Brief article description
Feed-through header
Plug-in system
POWER COMBICON 2,5
Type of contact
Female connector
Range of articles
ICV 2,5 HC/..-G
05/07/2020 Page 1 / 12
https://www.phoenixcontact.com/us/products/1943593
Printed-circuit board connector - ICV 2,5 HC/ 8-G-5,08 - 1943593
Technical data
Item properties
Pitch
5.08 mm
Number of positions
8
Mounting type
Wave soldering
Pin layout
Linear pinning
Locking
without
Number of levels
1
Number of connections
8
Number of potentials
8
Electrical parameters
Nominal current
16 A
Nom. voltage
320 V
Rated voltage
320 V
Rated voltage (III/2)
320 V
Rated voltage (II/2)
630 V
Rated surge voltage (III/3)
4 kV
Rated surge voltage (III/2)
4 kV
Rated surge voltage (II/2)
4 kV
Material data - contact
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/
JEDEC JESD 201
Contact material
Cu alloy
Surface characteristics
hot-dip tin-plated
Metal surface contact area (top layer)
Tin (4 - 8 µm Sn)
Metal surface soldering area (top layer)
Tin (4 - 8 µm Sn)
Material data - housing
Housing color
green (6021)
Insulating material
PA
Insulating material group
I
CTI according to IEC 60112
600
Flammability rating according to UL 94
V0
Glow wire flammability index GWFI according to EN 60695-2-12
850
Glow wire ignition temperature GWIT according to EN 60695-2-13
775
Temperature for the ball pressure test according to EN 60695-10-2
125 °C
Dimensions for the product
Length [ l ]
10.2 mm
Width [ w ]
42.64 mm
05/07/2020 Page 2 / 12
https://www.phoenixcontact.com/us/products/1943593
Printed-circuit board connector - ICV 2,5 HC/ 8-G-5,08 - 1943593
Technical data
Dimensions for the product
Height [ h ]
22.6 mm
Pitch
5.08 mm
Height (without solder pin)
19 mm
Solder pin [P]
3.6 mm
Pin dimensions
1.2 x 0.5 mm
Dimensions for PCB design
Hole diameter
1.4 mm
Packaging information
Type of packaging
packed in cardboard
Pieces per package
50
Denomination packing units
Pcs.
Ambient conditions
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 100 °C
Ambient temperature (operation)
-40 °C ... 100 °C (dependent on the derating curve)
Air clearances and creepage distances
Clearances and creepage distances
IEC 60664-1:2007-04
Specification
IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3)
3 mm
Minimum clearance - inhomogeneous field (III/2)
3 mm
Minimum clearance - inhomogeneous field (II/2)
3 mm
Minimum creepage distance value (III/3)
4 mm
Minimum creepage distance value (III/2)
3 mm
Minimum creepage distance value (II/2)
3.2 mm
Mechanical tests (A)
Test specification
IEC 61984
Insertion strength per pos. approx.
12 N
Withdraw strength per pos. approx.
10 N
Polarization when inserted requirement >20 N
Test passed
Contact holder in insert requirements >20 N
Test passed
Durability tests (B)
Specification
IEC 60512-9-1:2010-03
Contact resistance R1
1.5 mΩ
Insertion/withdrawal cycles
25
Contact resistance R2
1.6 mΩ
05/07/2020 Page 3 / 12
https://www.phoenixcontact.com/us/products/1943593
Printed-circuit board connector - ICV 2,5 HC/ 8-G-5,08 - 1943593
Technical data
Durability tests (B)
Impulse withstand voltage at sea level
4.8 kV
Power-frequency withstand voltage
2.21 kV
Insulation resistance, neighboring positions
> 0.1 TΩ
Climatic tests (D)
Specification
ISO 6988:1985-02
Cold stress
-40 °C/2 h
Thermal stress
100 °C/168 h
Corrosive stress
0.2 dm SO2 on 300 dm /40 °C/1 cycle
Impulse withstand voltage at sea level
4.8 kV
Power-frequency withstand voltage
2.21 kV
3
3
Environmental and durability tests (E)
Specification
IEC 61984:2008-10
Result, degree of protection, IP code
Finger safety with IP20 test finger
Vibration test
Specification
IEC 60068-2-6:2007-12
Result
Test passed
Frequency
10 - 150 - 10 Hz
Sweep speed
1 octave/min
Amplitude
0.35 mm (10 - 60.1 Hz)
Acceleration
5 g (60.1 - 150 Hz)
Test duration per axis
2.5 h
Standards and Regulations
Connection in acc. with standard
EN-VDE
CUL
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
05/07/2020 Page 4 / 12
https://www.phoenixcontact.com/us/products/1943593
Printed-circuit board connector - ICV 2,5 HC/ 8-G-5,08 - 1943593
Drilling diagram
05/07/2020 Page 5 / 12
https://www.phoenixcontact.com/us/products/1943593
Printed-circuit board connector - ICV 2,5 HC/ 8-G-5,08 - 1943593
Diagram
Type: FKIC 2,5 HC/...-ST- 5,08 with ICV 2,5 HC/...-G-5,08
05/07/2020 Page 6 / 12
https://www.phoenixcontact.com/us/products/1943593
Printed-circuit board connector - ICV 2,5 HC/ 8-G-5,08 - 1943593
Dimensional drawing
Classifications
eCl@ss
eCl@ss 4.0
27260700
eCl@ss 4.1
27260700
eCl@ss 5.0
27260700
eCl@ss 5.1
27260700
eCl@ss 6.0
27260700
eCl@ss 7.0
27440402
eCl@ss 8.0
27440402
eCl@ss 9.0
27440402
ETIM
ETIM 3.0
EC001121
ETIM 4.0
EC002637
ETIM 5.0
EC002637
ETIM 6.0
EC002637
05/07/2020 Page 7 / 12
https://www.phoenixcontact.com/us/products/1943593
Printed-circuit board connector - ICV 2,5 HC/ 8-G-5,08 - 1943593
Classifications
ETIM
ETIM 7.0
EC002637
UNSPSC
UNSPSC 6.01
30211810
UNSPSC 7.0901
39121409
UNSPSC 11
39121409
UNSPSC 12.01
39121409
UNSPSC 13.2
39121409
UNSPSC 18.0
39121409
UNSPSC 19.0
39121409
UNSPSC 20.0
39121409
UNSPSC 21.0
39121409
Approvals
Approvals
Approvals
IECEE CB Scheme / EAC / cULus Recognized / VDE Zeichengenehmigung
Ex Approvals
Approval details
IECEE CB Scheme
http://www.iecee.org/
Nominal voltage UN
250 V
Nominal current IN
16 A
EAC
DE1-60988-B1B2
B.01687
05/07/2020 Page 8 / 12
https://www.phoenixcontact.com/us/products/1943593
Printed-circuit board connector - ICV 2,5 HC/ 8-G-5,08 - 1943593
Approvals
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
D
Nominal voltage UN
250 V
300 V
Nominal current IN
16 A
10 A
VDE Zeichengenehmigung
http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx
Nominal voltage UN
250 V
Nominal current IN
16 A
E60425-19931014
40050079
Accessories
Accessories
Coding element
Coding profile - CP-MSTB - 1734634
Coding profile, is inserted into the slot on the plug or inverted header, red insulating material
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
05/07/2020 Page 9 / 12
https://www.phoenixcontact.com/us/products/1943593
Printed-circuit board connector - ICV 2,5 HC/ 8-G-5,08 - 1943593
Accessories
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Test plug terminal block
05/07/2020 Page 10 / 12
https://www.phoenixcontact.com/us/products/1943593
Printed-circuit board connector - ICV 2,5 HC/ 8-G-5,08 - 1943593
Accessories
Reducing plug - RPS - 0201647
Reducing plug, color: gray
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Additional products
Feed-through header - MSTBA 2,5 HC/ 8-G-5,08 - 1923924
PCB headers, nominal current: 16 A, rated voltage (III/2): 320 V, nominal cross section: 2.5 mm², number of positions: 8,
pitch: 5.08 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]:
3.5 mm
Feed-through header - MSTBVA 2,5 HC/ 8-G-5,08 - 1924363
PCB headers, nominal current: 16 A, rated voltage (III/2): 320 V, nominal cross section: 2.5 mm², number of positions: 8,
pitch: 5.08 mm, color: green, contact surface: Tin, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]:
3.9 mm
Printed-circuit board connector - FKIC 2,5 HC/ 8-ST-5,08 - 1942659
PCB connector, nominal current: 16 A, rated voltage (III/2): 320 V, nominal cross section: 2.5 mm², number of positions:
8, pitch: 5.08 mm, connection method: Push-in spring connection, color: green, contact surface: Tin
05/07/2020 Page 11 / 12
https://www.phoenixcontact.com/us/products/1943593
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
05/07/2020 Page 12 / 12
