https://www.phoenixcontact.com/us/products/1960026
Feed-through terminal block - UKB 4-FS(2-2,8-0,8) - 1960026
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Feed-through terminal block, Connection method: Slip-on connection, Cross section: 0.2 mm² - 4 mm²,
AWG: 24 - 12, Width: 6.2 mm, Color: gray, Mounting type: NS 32, NS 35/7,5, NS 35/15
The figure shows a version of the
article
Key commercial data
Packing unit
11
GTIN
Weight per Piece (excluding packing)
10.16 GRM
Custom tariff number
85369010
Country of origin
Germany
Technical data
General
Number of levels
1
Number of connections
3
Color
gray
Insulating material
PA
Inflammability class according to UL 94
V2
Maximum load current
20 A (dependent on the slip-on connection sleeve)
Rated surge voltage
8 kV
Pollution degree
3
Surge voltage category
III
Insulating material group
I
Nominal current IN
20 A (dependent on the slip-on connection sleeve)
Nominal voltage UN
800 V (dependent on the slip-on connection sleeve)
Open side panel
ja
Dimensions
14.10.2013 Page 1 / 12
https://www.phoenixcontact.com/us/products/1960026
Feed-through terminal block - UKB 4-FS(2-2,8-0,8) - 1960026
Technical data
Dimensions
Width
6.2 mm
Length
48 mm
Height NS 35/7,5
44 mm
Height NS 35/15
51.5 mm
Height NS 32
49 mm
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG/kcmil min.
24
Conductor cross section AWG/kcmil max
12
Conductor cross section stranded min.
0.2 mm²
Conductor cross section stranded max.
4 mm²
Min. AWG conductor cross section, stranded
24
Max. AWG conductor cross section, stranded
12
Connection method
Slip-on connection
Stripping length
8 mm
Tightening torque, min
0.5 Nm
Tightening torque max
0.8 Nm
Slip-on connection
6.3/2.8 x 0.8 mm
Classifications
eCl@ss
eCl@ss 4.0
27141120
eCl@ss 4.1
27141120
eCl@ss 5.0
27141120
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
14.10.2013 Page 2 / 12
https://www.phoenixcontact.com/us/products/1960026
Feed-through terminal block - UKB 4-FS(2-2,8-0,8) - 1960026
Classifications
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
GOST / GOST
Ex Approvals
Approvals submitted
Approval details
GOST
GOST
Accessories
Accessories
Assembly
14.10.2013 Page 3 / 12
https://www.phoenixcontact.com/us/products/1960026
Feed-through terminal block - UKB 4-FS(2-2,8-0,8) - 1960026
Accessories
Separating plate - TS-K - 1302215
Separating plate, Length: 22 mm, Height: 22 mm, Color: gray
DIN rail - NS 32 PERF 2000MM - 1201002
G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m
DIN rail - NS 32 UNPERF 2000MM - 1201015
G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
14.10.2013 Page 4 / 12
https://www.phoenixcontact.com/us/products/1960026
Feed-through terminal block - UKB 4-FS(2-2,8-0,8) - 1960026
Accessories
DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
14.10.2013 Page 5 / 12
https://www.phoenixcontact.com/us/products/1960026
Feed-through terminal block - UKB 4-FS(2-2,8-0,8) - 1960026
Accessories
DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
14.10.2013 Page 6 / 12
https://www.phoenixcontact.com/us/products/1960026
Feed-through terminal block - UKB 4-FS(2-2,8-0,8) - 1960026
Accessories
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
14.10.2013 Page 7 / 12
https://www.phoenixcontact.com/us/products/1960026
Feed-through terminal block - UKB 4-FS(2-2,8-0,8) - 1960026
Accessories
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
14.10.2013 Page 8 / 12
https://www.phoenixcontact.com/us/products/1960026
Feed-through terminal block - UKB 4-FS(2-2,8-0,8) - 1960026
Accessories
End clamp - E/UK - 1201442
End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
Bridges
Bridge bar isolator - IS-K 4 - 1302338
Bridge bar isolator, Color: gray
Bridge bar isolator - ISSBI 10- 6 - 0301505
Bridge bar isolator, Number of positions: 10, Color: silver
Fixed bridge - FBI 100- 6 - 0201650
Fixed bridge, Number of positions: 100, Color: silver
14.10.2013 Page 9 / 12
https://www.phoenixcontact.com/us/products/1960026
Feed-through terminal block - UKB 4-FS(2-2,8-0,8) - 1960026
Accessories
Fixed bridge - FBI 10- 6 - 0203250
Fixed bridge, Number of positions: 10, Color: silver
Fixed bridge - FBI 20- 6 - 0201867
Fixed bridge, Number of positions: 20, Color: silver
Marking
Marker cards - SBS 6:UNBEDRUCKT - 1007222
Marker cards, Card, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, Snap
into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 6 x 6.1 mm
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For
terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into
tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
14.10.2013 Page 10 / 12
https://www.phoenixcontact.com/us/products/1960026
Feed-through terminal block - UKB 4-FS(2-2,8-0,8) - 1960026
Accessories
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 6.2
mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Plug/Adapter
Female test connector - PSBJ 3/13/4 - 0201304
Female test connector, Color: silver
14.10.2013 Page 11 / 12
https://www.phoenixcontact.com/us/products/1960026
Feed-through terminal block - UKB 4-FS(2-2,8-0,8) - 1960026
Accessories
Female test connector - PSB 3/10/4 - 0601292
Female test connector, Color: silver
Tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com
14.10.2013 Page 12 / 12
