1960233

TWO IN ONE COMBICON Headers for Through Hole Reflow Processes, 5.08 mm Pitch With the "TWO IN ONE" solution for COMBICON THR pin strips, it is now possible to have components with a high number of positions, i.e. 12 - 24. The THR pin strip is assembled on the PCB from two segments. The inner side panels have not been added to the segments. This makes room for the housings to be mounted and aligned without contact. After reflow soldering, one has the same properties as with single section pin strips, i.e. plugging remains as convenient as before. All pin strips are made of high temperature resistant Liquid Crystal Polymer (LCP) and are suitable for use in lead-free solder processes with high peak temperatures. COMBICON Select The COMBICON search engine with CAD downloading COMBICON Select – the printed circuit board connection software supports your workflow from the PCB and housing layout to the ordering process with: –Systematic and fast selection of products –Universal Internet aided engineering with extensive CAD downloading –Easy-to-use e-shopping functions. http://select.phoenixcontact.com Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com CCA 2,5/…-GL(R)-5,08P26THR 5.08 mm Pitch 0 ,5 8 4 ,0 5 4 ,4 2 Bottom view, free space for solder paste, 0.5 mm deep Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 25.40 30.48 CCA 2,5/6-GL-5,08P26THR CCA 2,5/7-GL-5,08P26THR 19 59 10 5 19 59 11 8 50 8 9 10 35.56 40.64 45.72 CCA 2,5/8-GL-5,08P26THR CCA 2,5/9-GL-5,08P26THR CCA 2,5/10-GL-5,08P26THR 19 59 12 1 19 59 13 4 19 59 14 7 11 12 50.80 55.88 CCA 2,5/11-GL-5,08P26THR CCA 2,5/12-GL-5,08P26THR 19 59 15 0 19 59 16 3 6 7 25.40 30.48 CCA 2,5/6-GR-5,08P26THR CCA 2,5/7-GR-5,08P26THR 19 59 24 4 19 59 25 7 8 9 10 35.56 40.64 45.72 CCA 2,5/8-GR-5,08P26THR CCA 2,5/9-GR-5,08P26THR CCA 2,5/10-GR-5,08P26THR 19 59 26 0 19 59 27 3 19 59 28 6 11 12 50.80 55.88 CCA 2,5/11-GR-5,08P26THR CCA 2,5/12-GR-5,08P26THR 19 59 29 9 19 59 30 9 CR-MSTB 17 34 40 1 100 CR-MSTB NAT HT 19 54 36 2 100 Header with panel on one side, plug-in direction parallel to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black Header with panel on one side, plug-in direction parallel to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black (1) Coding element, inserted into the recess on the header after the reflow assembly process, red insulation material (2) HT coding element, inserted into the recess on the header before the reflow process, made of high temperature resistant beige plastic (3) Marker card, with 12 pcs. 10-section marker strips, white, self-adhesive, for 120 terminal blocks SK 5,08/3,8 (see COMBICON catalog) Technical data Dimensions Pitch Hole diameter Pin dimensions Technical data in accordance with IEC/ DIN VDE Insulating material group Surge voltage category / contamination class Rated voltage Rated surge voltage Nominal current / cross section Maximum load current / cross section Insulating material Inflammability class in acc. with UL 94 a 5 ,0 8 3 ,4 4 see description 5.08 1.5 1x1 [mm] [mm] [mm]x[mm] – –/– [V] [kV] [A]/[mm2] [A]/[mm2] IIIa III / 2 320 4 12 / – 12 / – LCP V0 III / 3 250 4 II / 2 400 4 2 ,3 4 a + 5 ,7 8 8 ,6 2 1 2 2 2 ,6 1 ,5 3 ,4 4 CCA 2,5/…-GL-5,08P26THR 5 ,0 8 2 ,3 4 a CCA 2,5/…-GL-5,08P26THR a 2 ,3 4 5 ,0 8 3 ,4 4 a + 5 ,7 8 2 ,6 8 ,6 2 1 2 1 ,5 2 3 ,4 4 5 ,0 8 3 ,4 4 a CCA 2,5/…-GR-5,08P26THR CCA 2,5/…-GR-5,08P26THR Phoenix Contact page 2 of 16 50 CCA 2,5/…-GL(R)-5,08RNP26THR 5.08 mm Pitch 0 ,5 8 4 ,0 5 4 ,4 2 Bottom view, free space for solder paste, 0.5 mm deep Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 25.40 30.48 CCA 2,5/6-GL-5,08RNP26THR CCA 2,5/7-GL-5,08RNP26THR 19 59 38 3 19 59 39 6 50 8 9 10 35.56 40.64 45.72 CCA 2,5/8-GL-5,08RNP26THR CCA 2,5/9-GL-5,08RNP26THR CCA 2,5/10-GL-5,08RNP26THR 19 59 40 6 19 59 41 9 19 59 42 2 11 12 50.80 55.88 CCA 2,5/11-GL-5,08RNP26THR CCA 2,5/12-GL-5,08RNP26THR 19 59 43 5 19 59 44 8 6 7 25.40 30.48 CCA 2,5/6-GR-5,08RNP26THR CCA 2,5/7-GR-5,08RNP26THR 19 59 52 9 19 59 53 2 8 9 10 35.56 40.64 45.72 CCA 2,5/8-GR-5,08RNP26THR CCA 2,5/9-GR-5,08RNP26THR CCA 2,5/10-GR-5,08RNP26THR 19 59 54 5 19 59 55 8 19 59 56 1 11 12 50.80 55.88 CCA 2,5/11-GR-5,08RNP26THR CCA 2,5/12-GR-5,08RNP26THR 19 59 57 4 19 59 58 7 CR-MSTB 17 34 40 1 100 CR-MSTB NAT HT 19 54 36 2 100 Header with engagement nose on one side, plug-in direction parallel to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black Header with engagement nose on one side, plug-in direction parallel to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black (1) Coding element, inserted into the recess on the header after the reflow assembly process, red insulation material (2) HT coding element, inserted into the recess on the header before the reflow process, made of high temperature resistant beige plastic (3) Marker card, with 12 pcs. 10-section marker strips, white, self-adhesive, for 120 terminal blocks SK 5,08/3,8 (see COMBICON catalog) Technical data Dimensions Pitch Hole diameter Pin dimensions Technical data in accordance with IEC/ DIN VDE Insulating material group Surge voltage category / contamination class Rated voltage Rated surge voltage Nominal current / cross section Maximum load current / cross section Insulating material Inflammability class in acc. with UL 94 5 ,4 5 a 3 ,5 4 5 ,0 8 see description 5.08 1.5 1x1 [mm] [mm] [mm]x[mm] – –/– [V] [kV] [A]/[mm2] [A]/[mm2] IIIa III / 2 320 4 12 / – 12 / – LCP V0 III / 3 250 4 II / 2 400 4 2 ,3 4 1 ,9 1 a + 5 ,8 8 8 ,6 2 1 2 2 ,6 2 1 ,5 5 ,0 8 a 2 ,3 4 a CCA 2,5/…-GL-5,08RNP26THR 2 ,3 4 5 ,0 8 3 ,5 4 CCA 2,5/…-GL-5,08RNP26THR 5 ,4 5 3 ,5 4 a + 5 ,8 8 1 ,9 1 2 ,6 8 ,6 2 1 2 1 ,5 CCA 2,5/…-GR-5,08RNP26THR 2 5 ,0 8 3 ,5 4 5 ,4 5 a CCA 2,5/…-GR-5,08RNP26THR Phoenix Contact page 3 of 16 50 CC 2,5/…-GFL(R)-5,08P26THR 5.08 mm Pitch 0 ,5 8 4 ,0 5 4 ,4 2 Bottom view, free space for solder paste, 0.5 mm deep Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 25.40 30.48 CC 2,5/6-GFL-5,08P26THR CC 2,5/7-GFL-5,08P26THR 19 56 30 2 19 56 31 5 50 8 9 10 35.56 40.64 45.72 CC 2,5/8-GFL-5,08P26THR CC 2,5/9-GFL-5,08P26THR CC 2,5/10-GFL-5,08P26THR 19 56 32 8 19 56 33 1 19 56 34 4 11 12 50.80 55.88 CC 2,5/11-GFL-5,08P26THR CC 2,5/12-GFL-5,08P26THR 19 56 35 7 19 56 36 0 6 7 25.40 30.48 CC 2,5/6-GFR-5,08P26THR CC 2,5/7-GFR-5,08P26THR 19 56 44 1 19 56 45 4 8 9 10 35.56 40.64 45.72 CC 2,5/8-GFR-5,08P26THR CC 2,5/9-GFR-5,08P26THR CC 2,5/10-GFR-5,08P26THR 19 56 46 7 19 56 47 0 19 56 48 3 11 12 50.80 55.88 CC 2,5/11-GFR-5,08P26THR CC 2,5/12-GFR-5,08P26THR 19 56 49 6 19 56 50 6 CR-MSTB 17 34 40 1 100 CR-MSTB NAT HT 19 54 36 2 100 Header with threaded flange on one side, plug-in direction parallel to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black Header with threaded flange on one side, plug-in direction parallel to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black (1) Coding element, inserted into the recess on the header after the reflow assembly process, red insulation material (2) HT coding element, inserted into the recess on the header before the reflow process, made of high temperature resistant beige plastic (3) Marker card, with 12 pcs. 10-section marker strips, white, self-adhesive, for 120 terminal blocks SK 5,08/3,8 (see COMBICON catalog) Technical data Dimensions Pitch Hole diameter Pin dimensions Technical data in accordance with IEC/ DIN VDE Insulating material group Surge voltage category / contamination class Rated voltage Rated surge voltage Nominal current / cross section Maximum load current / cross section Insulating material Inflammability class in acc. with UL 94 a 5 ,0 8 – –/– [V] [kV] [A]/[mm2] [A]/[mm2] IIIa III / 2 320 4 12 / – 12 / – LCP V0 III / 3 250 4 II / 2 400 4 2 ,3 4 5 ,0 8 2 2 ,6 2 ,5 8 ,6 2 a + 9 ,9 6 1 2 1 ,5 7 ,6 2 see description 5.08 1.5 1x1 [mm] [mm] [mm]x[mm] aa CC 2,5/…-GFL-5,08P26THR 2 ,3 4 a 5 ,0 8 2 ,3 4 5 ,0 8 2 ,4 CC 2,5/…-GFL-5,08P26THR 7 ,6 2 a + 9 ,9 6 2 ,6 2 ,5 8 ,6 2 1 ,5 1 2 2 ,4 2 2 ,3 4 5 ,0 8 5 ,0 8 a CC 2,5/…-GFR-5,08P26THR CC 2,5/…-GFR-5,08P26THR Phoenix Contact page 4 of 16 50 CCVA 2,5/…-GL(R)-5,08P26THR 5.08 mm Pitch 4 ,4 2 0 ,5 8 Bottom view, free space for solder paste, 0.55 mm deep Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 25.40 30.48 CCVA 2,5/6-GL-5,08P26THR CCVA 2,5/7-GL-5,08P26THR 19 59 94 3 19 59 95 6 50 8 9 10 35.56 40.64 45.72 CCVA 2,5/8-GL-5,08P26THR CCVA 2,5/9-GL-5,08P26THR CCVA 2,5/10-GL-5,08P26THR 19 59 96 9 19 59 97 2 19 59 98 5 11 12 50.80 55.88 CCVA 2,5/11-GL-5,08P26THR CCVA 2,5/12-GL-5,08P26THR 19 59 99 8 19 60 00 0 6 7 25.40 30.48 CCVA 2,5/6-GR-5,08P26THR CCVA 2,5/7-GR-5,08P26THR 19 60 12 3 19 60 13 6 8 9 10 35.56 40.64 45.72 CCVA 2,5/8-GR-5,08P26THR CCVA 2,5/9-GR-5,08P26THR CCVA 2,5/10-GR-5,08P26THR 19 60 14 9 19 60 15 2 19 60 16 5 11 12 50.80 55.88 CCVA 2,5/11-GR-5,08P26THR CCVA 2,5/12-GR-5,08P26THR 19 60 17 8 19 60 18 1 CR-MSTB 17 34 40 1 100 CR-MSTB NAT HT 19 54 36 2 100 Header with panel on one side, plug-in direction vertical to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black Header with panel on one side, plug-in direction vertical to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black (1) Coding element, inserted into the recess on the header after the reflow assembly process, red insulation material (2) HT coding element, inserted into the recess on the header before the reflow process, made of high temperature resistant beige plastic (3) Marker card, with 12 pcs. 10-section marker strips, white, self-adhesive, for 120 terminal blocks SK 5,08/3,8 (see COMBICON catalog) Technical data Dimensions Pitch Hole diameter Pin dimensions Technical data in accordance with IEC/ DIN VDE Insulating material group Surge voltage category / contamination class Rated voltage Rated surge voltage Nominal current / cross section Maximum load current / cross section Insulating material Inflammability class in acc. with UL 94 a 5 ,0 8 – –/– [V] [kV] [A]/[mm2] [A]/[mm2] IIIa III / 2 320 4 12 / – 12 / – LCP V0 III / 3 250 4 II / 2 400 4 a + 5 ,7 8 3 ,4 4 8 ,6 5 ,0 8 2 ,3 4 3 ,9 a 1 ,5 CCVA 2,5/…-GL-5,08P26THR CCVA 2,5/…-GL-5,08P26THR a 5 ,0 8 2 ,3 4 a + 5 ,7 8 8 ,6 1 2 3 ,9 3 ,4 4 3 ,4 4 2 ,6 1 2 3 ,9 2 ,3 4 see description 5.08 1.5 1x1 [mm] [mm] [mm]x[mm] 2 ,6 3 ,9 1 ,5 CCVA 2,5/…-GR-5,08P26THR 3 ,4 4 5 ,0 8 a CCVA 2,5/…-GR-5,08P26THR Phoenix Contact page 5 of 16 2 ,3 4 50 CCVA 2,5/...-GL(R)-5,08RNP26THR 5.08 mm Pitch 4 ,4 2 0 ,5 8 Bottom view, free space for solder paste, 0.55 mm deep Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 25.40 30.48 CCVA 2,5/6-GL-5,08RNP26THR CCVA 2,5/7-GL-5,08RNP26THR 19 60 26 2 19 60 27 5 50 8 9 10 35.56 40.64 45.72 CCVA 2,5/8-GL-5,08RNP26THR CCVA 2,5/9-GL-5,08RNP26THR CCVA 2,5/10-GL-5,08RNP26THR 19 60 28 8 19 60 29 1 19 60 31 4 11 12 50.80 55.88 CCVA 2,5/11-GL-5,08RNP26THR CCVA 2,5/12-GL-5,08RNP26THR 19 60 32 7 19 60 33 0 6 7 25.40 30.48 CCVA 2,5/6-GR-5,08RNP26THR CCVA 2,5/7-GR-5,08RNP26THR 19 60 41 1 19 60 42 4 8 9 10 35.56 40.64 45.72 CCVA 2,5/8-GR-5,08RNP26THR CCVA 2,5/9-GR-5,08RNP26THR CCVA 2,5/10-GR-5,08RNP26THR 19 60 43 7 19 60 44 0 19 60 45 3 11 12 50.80 55.88 CCVA 2,5/11-GR-5,08RNP26THR CCVA 2,5/12-GR-5,08RNP26THR 19 60 46 6 19 60 47 9 CR-MSTB 17 34 40 1 100 CR-MSTB NAT HT 19 54 36 2 100 Header with engagement nose on one side, plug-in direction vertical to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black Header with engagement nose on one side, plug-in direction vertical to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black (1) Coding element, inserted into the recess on the header after the reflow assembly process, red insulation material (2) HT coding element, inserted into the recess on the header before the reflow process, made of high temperature resistant beige plastic (3) Marker card, with 12 pcs. 10-section marker strips, white, self-adhesive, for 120 terminal blocks SK 5,08/3,8 (see COMBICON catalog) Technical data Dimensions Pitch Hole diameter Pin dimensions Technical data in accordance with IEC/ DIN VDE Insulating material group Surge voltage category / contamination class Rated voltage Rated surge voltage Nominal current / cross section Maximum load current / cross section Insulating material Inflammability class in acc. with UL 94 a 5 ,0 8 – –/– [V] [kV] [A]/[mm2] [A]/[mm2] IIIa III / 2 320 4 12 / – 12 / – LCP V0 III / 3 250 4 5 ,4 5 II / 2 400 4 1 ,9 1 a + 5 ,8 8 8 ,6 5 ,0 8 2 ,3 4 1 ,5 a CCVA 2,5/…-GL-5,08RNP26THR a 5 ,0 8 CCVA 2,5/…-GL-5,08RNP26THR 2 ,3 4 8 ,6 1 ,9 1 a + 5 ,8 8 1 ,5 2 ,6 1 2 3 ,9 5 ,4 5 3 ,9 3 ,5 4 2 ,6 1 2 3 ,9 2 ,3 4 see description 5.08 1.5 1x1 [mm] [mm] [mm]x[mm] 3 ,9 3 ,5 4 5 ,0 8 2 ,3 4 a CCVA 2,5/..-GR-5,08RNP26THR CCVA 2,5/…-GR-5,08RNP26THR Phoenix Contact page 6 of 16 50 CCV 2,5/…-GFL(R)-5,08P26THR 5.08 mm Pitch 4 ,4 2 0 ,5 8 Bottom view, free space for solder paste, 0.55 mm deep Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 25.40 30.48 CCV 2,5/6-GFL-5,08P26THR CCV 2,5/7-GFL-5,08P26THR 19 59 66 8 19 59 67 1 50 8 9 10 35.56 40.64 45.72 CCV 2,5/8-GFL-5,08P26THR CCV 2,5/9-GFL-5,08P26THR CCV 2,5/10-GFL-5,08P26THR 19 59 68 4 19 59 69 7 19 59 70 7 11 12 50.80 55.88 CCV 2,5/11-GFL-5,08P26THR CCV 2,5/12-GFL-5,08P26THR 19 59 71 0 19 59 72 3 6 7 25.40 30.48 CCV 2,5/6-GFR-5,08P26THR CCV 2,5/7-GFR-5,08P26THR 19 59 80 4 19 59 81 7 8 9 10 35.56 40.64 45.72 CCV 2,5/8-GFR-5,08P26THR CCV 2,5/9-GFR-5,08P26THR CCV 2,5/10-GFR-5,08P26THR 19 59 82 0 19 59 83 3 19 59 84 6 11 12 50.80 55.88 CCV 2,5/11-GFR-5,08P26THR CCV 2,5/12-GFR-5,08P26THR 19 59 85 9 19 59 86 2 CR-MSTB 17 34 40 1 100 CR-MSTB NAT HT 19 54 36 2 100 Header with threaded flange on one side, plug-in direction vertical to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black Header with threaded flange on one side, plug-in direction vertical to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black (1) Coding element, inserted into the recess on the header after the reflow assembly process, red insulation material (2) HT coding element, inserted into the recess on the header before the reflow process, made of high temperature resistant beige plastic (3) Marker card, with 12 pcs. 10-section marker strips, white, self-adhesive, for 120 terminal blocks SK 5,08/3,8 (see COMBICON catalog) Technical data 5 ,0 8 a – –/– [V] [kV] [A]/[mm2] [A]/[mm2] IIIa III / 2 320 4 12 / – 12 / – LCP V0 III / 3 250 4 II / 2 400 4 a + 9 ,9 6 5 ,0 8 8 ,6 1 ,5 1 2 3 ,9 2 ,3 4 see description 5.08 1.5 1x1 [mm] [mm] [mm]x[mm] 2 ,3 4 5 ,0 8 2 ,4 a CCV 2,5/…-GFL-5,08P26THR 2 ,3 4 8 ,6 a + 9 ,9 6 2 ,6 1 2 1 ,5 3 ,9 5 ,0 8 3 ,9 a CCV 2,5/…-GFL-5,08P26THR 5 ,0 8 5 ,0 8 2 ,6 Dimensions Pitch Hole diameter Pin dimensions Technical data in accordance with IEC/ DIN VDE Insulating material group Surge voltage category / contamination class Rated voltage Rated surge voltage Nominal current / cross section Maximum load current / cross section Insulating material Inflammability class in acc. with UL 94 2 ,4 3 ,9 5 ,0 8 5 ,0 8 a CCV 2,5/…-GFR-5,08P26THR CCV 2,5/…-GFR-5,08P26THR Phoenix Contact page 7 of 16 2 ,3 4 50 TWO IN ONE COMBICON headers, taped, 5.08 mm pitch, horizontal and vertical designs With the "TWO IN ONE" solution for COMBICON THR pin strips, it is now possible to have components with a high number of positions, i.e. 12 - 24. Packaging in accordance with modern industrial standards, particularly tape widths of 56 to 88 mm, remains unchanged. The same processing equipment and familiar requirements for the mounting process, as already apply for pin strips with a low number of positions, facilitate integration in existing production processes. The THR pin strip is assembled on the PCB from two segments. Each segment is packaged in a tape. The inner side panels have not been added to the segments. This makes room for the housings to be mounted and aligned without contact. After reflow soldering, one has the same properties as with single section pin strips, i.e. plugging remains as convenient as before. All pin strips are made of high temperature resistant Liquid Crystal Polymer (LCP) and are suitable for use in lead-free solder processes with high peak temperatures. Phoenix Contact page 8 of 16 CCA 2,5/…-GL(R)-5,08P26THRR… 5.08 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 25.40 30.48 CCA 2,5/6-GL-5,08P26THRR56 CCA 2,5/7-GL-5,08P26THRR56 19 59 17 6 19 59 18 9 330 330 8 9 10 35.56 40.64 45.72 CCA 2,5/8-GL-5,08P26THRR56 CCA 2,5/9-GL-5,08P26THRR88 CCA 2,5/10-GL-5,08P26THRR88 19 59 19 2 19 59 20 2 19 59 21 5 330 240 240 11 12 50.80 55.88 CCA 2,5/11-GL-5,08P26THRR88 CCA 2,5/12-GL-5,08P26THRR88 19 59 22 8 19 59 23 1 240 240 6 7 25.40 30.48 CCA 2,5/6-GR-5,08P26THRR56 CCA 2,5/7-GR-5,08P26THRR56 19 59 31 2 19 59 32 5 330 330 8 9 10 35.56 40.64 45.72 CCA 2,5/8-GR-5,08P26THRR56 CCA 2,5/9-GR-5,08P26THRR88 CCA 2,5/10-GR-5,08P26THRR88 19 59 33 8 19 59 34 1 19 59 35 4 330 240 240 11 12 50.80 55.88 CCA 2,5/11-GR-5,08P26THRR88 CCA 2,5/12-GR-5,08P26THRR88 19 59 36 7 19 59 37 0 240 240 CR-MSTB 17 34 40 1 100 CR-MSTB NAT HT 19 54 36 2 100 Taped header with panel on one side, plug-in direction parallel to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black Taped header with panel on one side, plug-in direction parallel to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black (1) Coding element, inserted into the recess on the header after the reflow assembly process, red insulation material (2) HT coding element1), inserted into the recess on the header before the reflow process, made of high temperature resistant beige plastic (3) Marker card, with 12 pcs. 10-section marker strips, white, self-adhesive, for 120 terminal blocks SK 5,08/3,8 (see COMBICON catalog) Technical data Dimensions Pitch Hole diameter Pin dimensions Technical data in accordance with IEC/ DIN VDE Insulating material group Surge voltage category / contamination class Rated voltage Rated surge voltage Nominal current / cross section Maximum load current / cross section Insulating material Inflammability class in acc. with UL 94 see description 5.08 1.5 1x1 [mm] [mm] [mm]x[mm] – –/– [V] [kV] [A]/[mm2] [A]/[mm2] Dimensional drawings, see page 2 Dimensional drawings of tapes, see page 12. 1) Precoded taped articles are available on request. Phoenix Contact page 9 of 16 III / 3 250 4 IIIa III / 2 320 4 12 / – 12 / – LCP V0 II / 2 400 4 CCA 2,5/…-GL(R)-5,08RNP26THRR… 5.08 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 25.40 30.48 CCA 2,5/6-GL-5,08RNP26THRR56 CCA 2,5/7-GL-5,08RNP26THRR56 19 59 45 1 19 59 46 4 330 330 8 9 10 35.56 40.64 45.72 CCA 2,5/8-GL-5,08RNP26THRR88 CCA 2,5/9-GL-5,08RNP26THRR88 CCA 2,5/10-GL-5,08RNP26THRR88 19 59 47 7 19 59 48 0 19 59 49 3 240 240 240 11 12 50.80 55.88 CCA 2,5/11-GL-5,08RNP26THRR88 CCA 2,5/12-GL-5,08RNP26THRR88 19 59 50 3 19 59 51 6 240 240 6 7 25.40 30.48 CCA 2,5/6-GR-5,08RNP26THRR56 CCA 2,5/7-GR-5,08RNP26THRR56 19 59 59 0 19 59 60 0 330 330 8 9 10 35.56 40.64 45.72 CCA 2,5/8-GR-5,08RNP26THRR88 CCA 2,5/9-GR-5,08RNP26THRR88 CCA 2,5/10-GR-5,08RNP26THRR88 19 59 61 3 19 59 62 6 19 59 63 9 240 240 240 11 12 50.80 55.88 CCA 2,5/11-GR-5,08RNP26THRR88 CCA 2,5/12-GR-5,08RNP26THRR88 19 59 64 2 19 59 65 5 240 240 CR-MSTB 17 34 40 1 100 CR-MSTB NAT HT 19 54 36 2 100 Taped header with engagement nose on one side, plug-in direction parallel to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black Taped header with engagement nose on one side, plug-in direction parallel to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black (1) Coding element, inserted into the recess on the header after the reflow assembly process, red insulation material (2) HT coding element1), inserted into the recess on the header before the reflow process, made of high temperature resistant beige plastic (3) Marker card, with 12 pcs. 10-section marker strips, white, self-adhesive, for 120 terminal blocks SK 5,08/3,8 (see COMBICON catalog) Technical data Dimensions Pitch Hole diameter Pin dimensions Technical data in accordance with IEC/ DIN VDE Insulating material group Surge voltage category / contamination class Rated voltage Rated surge voltage Nominal current / cross section Maximum load current / cross section Insulating material Inflammability class in acc. with UL 94 see description 5.08 1.5 1x1 [mm] [mm] [mm]x[mm] – –/– [V] [kV] [A]/[mm2] [A]/[mm2] Dimensional drawings, see 3 Dimensional drawings of tapes, see page 12. 1) Precoded taped articles are available on request. Phoenix Contact page 10 of 16 III / 3 250 4 IIIa III / 2 320 4 12 / – 12 / – LCP V0 II / 2 400 4 CC 2,5/…-GFL(R)-5,08P26THRR… 5.08 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 25.40 30.48 CC 2,5/6-GFL-5,08P26THRR56 CC 2,5/7-GFL-5,08P26THRR56 19 56 37 3 19 56 38 6 330 330 8 9 10 35.56 40.64 45.72 CC 2,5/8-GFL-5,08P26THRR88 CC 2,5/9-GFL-5,08P26THRR88 CC 2,5/10-GFL-5,08P26THRR88 19 56 39 9 19 56 40 9 19 56 41 2 240 240 240 11 12 50.80 55.88 CC 2,5/11-GFL-5,08P26THRR88 CC 2,5/12-GFL-5,08P26THRR88 19 56 42 5 19 56 43 8 240 240 6 7 25.40 30.48 CC 2,5/6-GFR-5,08P26THRR56 CC 2,5/7-GFR-5,08P26THRR56 19 56 51 9 19 56 52 2 330 330 8 9 10 35.56 40.64 45.72 CC 2,5/8-GFR-5,08P26THRR88 CC 2,5/9-GFR-5,08P26THRR88 CC 2,5/10-GFR-5,08P26THRR88 19 56 53 5 19 56 54 8 19 56 55 1 240 240 240 11 12 50.80 55.88 CC 2,5/11-GFR-5,08P26THRR88 CC 2,5/12-GFR-5,08P26THRR88 19 56 56 4 19 56 57 7 240 240 CR-MSTB 17 34 40 1 100 CR-MSTB NAT HT 19 54 36 2 100 Taped header with threaded flange on one side, plug-in direction parallel to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black Taped header with threaded flange on one side, plug-in direction parallel to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black (1) Coding element, inserted into the recess on the header after the reflow assembly process, red insulation material (2) HT coding element1), inserted into the recess on the header before the reflow process, made of high temperature resistant beige plastic (3) Marker card, with 12 pcs. 10-section marker strips, white, self-adhesive, for 120 terminal blocks SK 5,08/3,8 (see COMBICON catalog) Technical data Dimensions Pitch Hole diameter Pin dimensions Technical data in accordance with IEC/ DIN VDE Insulating material group Surge voltage category / contamination class Rated voltage Rated surge voltage Nominal current / cross section Maximum load current / cross section Insulating material Inflammability class in acc. with UL 94 see description 5.08 1.5 1x1 [mm] [mm] [mm]x[mm] – –/– [V] [kV] [A]/[mm2] [A]/[mm2] Dimensional drawings, see page 4. Dimensional drawings of tapes, see page 12. 1) Precoded taped articles are available on request. Phoenix Contact page 11 of 16 III / 3 250 4 IIIa III / 2 320 4 12 / – 12 / – LCP V0 II / 2 400 4 TWO IN ONE COMBICON Headers, taped, pitch 5.08 mm, horizontal designs R N R N G F G F A A R N R N R N G F G F A 1 6 A R N R N G F G F 8 8 A Feeder direction, tape width 88 mm (R88), odd nos. of positions 1 6 1 3 ,6 A 8 8 Feeder direction, tape width 88 mm (R88), even nos. of positions 1 2 ,7 1 6 1 2 ,7 1 6 R N Phoenix Contact page 12 of 16 1 3 ,6 A 5 6 A Feeder direction, tape width 56 mm (R56), odd nos. of positions 5 6 Feeder direction, tape width 56 mm (R56), even nos. of positions CCVA 2,5/…-GL(R)-5,08P26THRR… 5.08 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 25.40 30.48 CCVA 2,5/6-GL-5,08P26THRR56 CCVA 2,5/7-GL-5,08P26THRR56 19 60 04 2 19 60 05 5 140 8 9 10 35.56 40.64 45.72 CCVA 2,5/8-GL-5,08P26THRR56 CCVA 2,5/9-GL-5,08P26THRR88 CCVA 2,5/10-GL-5,08P26THRR88 19 60 06 8 19 60 07 1 19 60 08 4 11 12 50.80 55.88 CCVA 2,5/11-GL-5,08P26THRR88 CCVA 2,5/12-GL-5,08P26THRR88 19 60 09 7 19 60 11 0 6 7 25.40 30.48 CCVA 2,5/6-GR-5,08P26THRR56 CCVA 2,5/7-GR-5,08P26THRR56 19 60 19 4 19 60 20 4 8 9 10 35.56 40.64 45.72 CCVA 2,5/8-GR-5,08P26THRR56 CCVA 2,5/9-GR-5,08P26THRR88 CCVA 2,5/10-GR-5,08P26THRR88 19 60 21 7 19 60 22 0 19 60 23 3 11 12 50.80 55.88 CCVA 2,5/11-GR-5,08P26THRR88 CCVA 2,5/12-GR-5,08P26THRR88 19 60 24 6 19 60 25 9 CR-MSTB 17 34 40 1 100 CR-MSTB NAT HT 19 54 36 2 100 Taped header with panel on one side, plug-in direction vertical to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black Taped header with panel on one side, plug-in direction vertical to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black (1) Coding element, inserted into the recess on the header after the reflow assembly process, red insulation material (2) HT coding element1), inserted into the recess on the header before the reflow process, made of high temperature resistant beige plastic (3) Marker card, with 12 pcs. 10-section marker strips, white, self-adhesive, for 120 terminal blocks SK 5,08/3,8 (see COMBICON catalog) Technical data Dimensions Pitch Hole diameter Pin dimensions Technical data in accordance with IEC/ DIN VDE Insulating material group Surge voltage category / contamination class Rated voltage Rated surge voltage Nominal current / cross section Maximum load current / cross section Insulating material Inflammability class in acc. with UL 94 see description 5.08 1.5 1x1 [mm] [mm] [mm]x[mm] – –/– [V] [kV] [A]/[mm2] [A]/[mm2] Dimensional drawings, see page 5 Dimensional drawings of tapes, see page 16. 1) Precoded taped articles are available on request. Phoenix Contact page 13 of 16 III / 3 250 4 IIIa III / 2 320 4 12 / – 12 / – LCP V0 II / 2 400 4 140 CCVA 2,5/…-GL(R)-5,08RNP26THRR… 5.08 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 25.40 30.48 CCVA 2,5/6-GL-5,08RNP26THRR56 CCVA 2,5/7-GL-5,08RNP26THRR56 19 60 34 3 19 60 35 6 140 8 9 10 35.56 40.64 45.72 CCVA 2,5/8-GL-5,08RNP26THRR88 CCVA 2,5/9-GL-5,08RNP26THRR88 CCVA 2,5/10-GL-5,08RNP26THRR88 19 60 36 9 19 60 37 2 19 60 38 5 11 12 50.80 55.88 CCVA 2,5/11-GL-5,08RNP26THRR88 CCVA 2,5/12-GL-5,08RNP26THRR88 19 60 39 8 19 60 40 8 6 7 25.40 30.48 CCVA 2,5/6-GR-5,08RNP26THRR56 CCVA 2,5/7-GR-5,08RNP26THRR56 19 60 48 2 19 60 49 5 8 9 10 35.56 40.64 45.72 CCVA 2,5/8-GR-5,08RNP26THRR88 CCVA 2,5/9-GR-5,08RNP26THRR88 CCVA 2,5/10-GR-5,08RNP26THRR88 19 60 50 5 19 60 51 8 19 60 52 1 11 12 50.80 55.88 CCVA 2,5/11-GR-5,08RNP26THRR88 CCVA 2,5/12-GR-5,08RNP26THRR88 19 60 53 4 19 60 54 7 CR-MSTB 17 34 40 1 100 CR-MSTB NAT HT 19 54 36 2 100 Taped header with engagement nose on one side, plug-in direction vertical to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black Taped header with engagement nose on one side, plug-in direction vertical to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black (1) Coding element, inserted into the recess on the header after the reflow assembly process, red insulation material (2) HT coding element1), inserted into the recess on the header before the reflow process, made of high temperature resistant beige plastic (3) Marker card, with 12 pcs. 10-section marker strips, white, self-adhesive, for 120 terminal blocks SK 5,08/3,8 (see COMBICON catalog) Technical data Dimensions Pitch Hole diameter Pin dimensions Technical data in accordance with IEC/ DIN VDE Insulating material group Surge voltage category / contamination class Rated voltage Rated surge voltage Nominal current / cross section Maximum load current / cross section Insulating material Inflammability class in acc. with UL 94 see description 5.08 1.5 1x1 [mm] [mm] [mm]x[mm] – –/– [V] [kV] [A]/[mm2] [A]/[mm2] Dimensional drawings, see page 6. Dimensional drawings of tapes, see page 16. 1) Precoded taped articles are available on request. Phoenix Contact page 14 of 16 III / 3 250 4 IIIa III / 2 320 4 12 / – 12 / – LCP V0 II / 2 400 4 140 CCV 2,5/…-GFL(R)-5,08P26THRR… 5.08 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. Description No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 25.40 30.48 CCV 2,5/6-GFL-5,08P26THRR56 CCV 2,5/7-GFL-5,08P26THRR56 19 59 73 6 19 59 74 9 140 8 9 10 35.56 40.64 45.72 CCV 2,5/8-GFL-5,08P26THRR88 CCV 2,5/9-GFL-5,08P26THRR88 CCV 2,5/10-GFL-5,08P26THRR88 19 59 75 2 19 59 76 5 19 59 77 8 11 12 50.80 55.88 CCV 2,5/11-GFL-5,08P26THRR88 CCV 2,5/12-GFL-5,08P26THRR88 19 59 78 1 19 59 79 4 6 7 25.40 30.48 CCV 2,5/6-GFR-5,08P26THRR56 CCV 2,5/7-GFR-5,08P26THRR56 19 59 87 5 19 59 88 8 8 9 10 35.56 40.64 45.72 CCV 2,5/8-GFR-5,08P26THRR88 CCV 2,5/9-GFR-5,08P26THRR88 CCV 2,5/10-GFR-5,08P26THRR88 19 59 89 1 19 59 90 1 19 59 91 4 11 12 50.80 55.88 CCV 2,5/11-GFR-5,08P26THRR88 CCV 2,5/12-GFR-5,08P26THRR88 19 59 92 7 19 59 93 0 CR-MSTB 17 34 40 1 100 CR-MSTB NAT HT 19 54 36 2 100 Taped header with threaded flange on one side, plug-in direction vertical to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black Taped header with threaded flange on one side, plug-in direction vertical to the PCB, pin length 2.6 mm, 5.08 mm pitch, color: black (1) Coding element, inserted into the recess on the header after the reflow assembly process, red insulation material (2) HT coding element1), inserted into the recess on the header before the reflow process, made of high temperature resistant beige plastic (3) Marker card, with 12 pcs. 10-section marker strips, white, self-adhesive, for 120 terminal blocks SK 5,08/3,8 (see COMBICON catalog) Technical data Dimensions Pitch Hole diameter Pin dimensions Technical data in accordance with IEC/ DIN VDE Insulating material group Surge voltage category / contamination class Rated voltage Rated surge voltage Nominal current / cross section Maximum load current / cross section Insulating material Inflammability class in acc. with UL 94 see description 5.08 1.5 1x1 [mm] [mm] [mm]x[mm] – –/– [V] [kV] [A]/[mm2] [A]/[mm2] Dimensional drawings, see page 7. Dimensional drawings of tapes, see page 16. 1) Precoded taped articles are available on request. Phoenix Contact page 15 of 16 III / 3 250 4 IIIa III / 2 320 4 12 / – 12 / – LCP V0 II / 2 400 4 140 TWO IN ONE COMBICON Headers, taped, pitch 5.08 mm, vertical designs A A R N R N G F G F 5 6 Feeder direction, tape width 56 mm (R56), even and odd nos. of positions 1 7 ,8 2 4 R N R N G F G F 2 0  Phoenix Contact 15.03.03 TNR: 5152665-00 http://www.phoenixcontact.com A 1 6 ,6 A 8 8 Feeder direction, tape width 88 mm (R88), even and odd nos. of positions Phoenix Contact page 16 of 16