1962972

TWO IN ONE MINI COMBICON Headers for Through Hole Reflow Applications MC 1,5/…G…THT without and with Threaded Flange 3.5 or 3.81 mm Pitch Integrating high-position single section THR pin strips in the SMD process places special demands on the tolerances of the components and mounting systems. On the packaging side, expensive tapes and feeders in special widths are also necessary. With the “Two in One” solution for THR pin strips, it is now possible to have components with a high number of positions, i.e. 12 - 20. Packaging in accordance with today's industrial standard, particularly tape widths of 56 mm or 72 mm, remains unchanged. The same processing equipment and known requirements for the mounting process, as are already valid for pin strips with a low number of positions, facilitate integration in existing production processes. The THR pin strip is assembled on the PCB from two segments. Each segment is packaged in a tape. The inner side panels have not been added to the segments. This makes room for the housings to be mounted and aligned without contact. After reflow soldering, one has the same properties as with single section pin strips, i.e. plugging remains as convenient as before. The “2 in 1” THR pin strips are available in pitches of 3.5 mm and 3.81 mm with horizontal and vertical plug-in directions. Housings with a side panel or with a threaded flange and 12 to 20 positions are therefore available. Packaging as “Tape on Reel” can be supplied on request. COMBICON Select The COMBICON search engine with CAD downloading COMBICON Select – the printed circuit board connection software supports your workflow from the PCB and housing layout to the ordering process with: –Systematic and fast selection of products –Universal Internet aided engineering with extensive CAD downloading –Easy-to-use e-shopping functions. http://select.phoenixcontact.com Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com MC 1,5/…-GL(R)…THT 3.5 or 3.81 mm Pitch Note: Through Hole Reflow headers for automated mounting processes can be packaged as "Tape On Reel" if requested. No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 17.5 21 MC 1,5/6-GL-3,5 THT MC 1,5/7-GL-3,5 THT 19 61 63 0 19 61 64 3 50 8 9 10 24.5 28 31.5 MC 1,5/8-GL-3,5 THT MC 1,5/9-GL-3,5 THT MC 1,5/10-GL-3,5 THT 19 61 65 6 19 61 66 9 19 61 67 2 6 7 17.5 21 MC 1,5/6-GR-3,5 THT MC 1,5/7-GR-3,5 THT 19 61 70 8 19 61 71 1 8 9 10 24.5 28 31.5 MC 1,5/8-GR-3,5 THT MC 1,5/9-GR-3,5 THT MC 1,5/10-GR-3,5 THT 19 61 72 4 19 61 73 7 19 61 74 0 6 7 19.05 22.86 MC 1,5/6-GL-3,81 THT MC 1,5/7-GL-3,81 THT 19 61 35 5 19 61 36 8 8 9 10 26.67 30.48 34.29 MC 1,5/8-GL-3,81 THT MC 1,5/9-GL-3,81 THT MC 1,5/10-GL-3,81 THT 19 61 37 1 19 61 38 4 19 61 39 7 6 7 19.05 22.86 MC 1,5/6-GR-3,81 THT MC 1,5/7-GR-3,81 THT 19 61 42 3 19 61 43 6 8 9 10 26.67 30.48 34.29 MC 1,5/8-GR-3,81 THT MC 1,5/9-GR-3,81 THT MC 1,5/10-GR-3,81 THT 19 61 44 9 19 61 45 2 19 61 46 5 (1) Coding profile, is inserted into the groove on the header after reflow-soldering, made of red plastic CP-MSTB 17 34 63 4 100 (2) Coding profile, is inserted into the groove on the header before reflow-soldering, made of hightemperature resistant beige plastic CP-MSTB NAT HT 19 54 35 9 100 Description Two-In-One header, plug-in direction horizontal to the conductor axis, 3.5 mm pitch, side panel on the left, open on one side, color: black, Two-In-One header, plug-in direction horizontal to the conductor axis, 3.5 mm pitch, side panel on the right, open on one side, color: black, Two-In-One header, plug-in direction horizontal to the conductor axis, 3.81 mm pitch, side panel on the left, open on one side, color: black, Two-In-One header, plug-in direction horizontal to the conductor axis, 3.81 mm pitch, side panel on the right, open on one side, color: black, (3) Marker card, with 14 pcs. 10-section marker strips, white, self-adhesive, for 140 terminal blocks 50 50 50 SK 3,5/2,8 or SK 3,81/2,8 (see COMBICON catalog) Technical data Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm] Technical data in accordance with IEC/ DIN VDE Insulating material group – Surge voltage category / contamination class –/– Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG CSA: [V]/[A|/AWG a + 3 ,9 5 (a + 4 ,2 6 ) 2 ,4 5 (2 ,6 ) 3 ,5 (3 ,8 1 ) a 3 ,5 (3 ,8 1 ) a 2 ,4 5 (2 ,6 ) 2 ,4 5 (2 ,6 ) MC 1,5/…-GL-THT 8 (*) 9 ,2 7 ,2 5 3 ,4 8 1 1 ,1 8 a 3 ,5 (3 ,8 1 ) 1 8 ,7 7 ,2 5 a + 3 ,9 5 (a + 4 ,2 6 ) 9 ,2 II / 2 250 2.5 300 / 8 / – – 1 1 ,1 1 8 ,7 IIIa III / 2 160 2.5 8/– 8/– PA V0 III / 3 160 2.5 3 ,4 a 3 ,5 (3 ,8 1 ) (*) 2 ,4 5 (2 ,6 ) see description 3.5 / 3.81 *) ≤ 8-pos. = 1.3 / > 8-pos. = 1.4 0.8 x 0.8 8 MC 1,5/…-GR-THT Phoenix Contact page 2 of 5 MC 1,5/…-GFL(R)…THT 3.5 or 3.81 mm Pitch Note: Through Hole Reflow headers for automated mounting processes can be packaged as "Tape On Reel" if requested. No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 17.5 21 MC 1,5/6-GFL-3,5 THT MC 1,5/7-GFL-3,5 THT 19 62 98 5 19 62 99 8 50 8 9 10 24.5 28 31.5 MC 1,5/8-GFL-3,5 THT MC 1,5/9-GFL-3,5 THT MC 1,5/10-GFL-3,5 THT 19 63 00 7 19 61 68 5 19 61 69 8 6 7 17.5 21 MC 1,5/6-GFR-3,5 THT MC 1,5/7-GFR-3,5 THT 19 63 01 0 19 63 02 3 8 9 10 24.5 28 31.5 MC 1,5/8-GFR-3,5 THT MC 1,5/9-GFR-3,5 THT MC 1,5/10-GFR-3,5 THT 19 63 03 6 19 61 75 3 19 61 76 6 6 7 19.05 22.86 MC 1,5/6-GFL-3,81 THT MC 1,5/7-GFL-3,81 THT 19 62 85 9 19 62 86 2 8 9 10 26.67 30.48 34.29 MC 1,5/8-GFL-3,81 THT MC 1,5/9-GFL-3,81 THT MC 1,5/10-GFL-3,81 THT 19 62 87 5 19 61 40 7 19 61 41 0 6 7 19.05 22.86 MC 1,5/6-GFR-3,81 THT MC 1,5/7-GFR-3,81 THT 19 62 89 1 19 62 90 1 8 9 10 26.67 30.48 34.29 MC 1,5/8-GFR-3,81 THT MC 1,5/9-GFR-3,81 THT MC 1,5/10-GFR-3,81 THT 19 62 91 4 19 61 47 8 19 61 48 1 (1) Coding profile, is inserted into the groove on the header after reflow-soldering, made of red plastic CP-MSTB 17 34 63 4 100 (2) Coding profile, is inserted into the groove on the header before reflow-soldering, made of hightemperature resistant beige plastic CP-MSTB NAT HT 19 54 35 9 100 Description Two-In-One header, plug-in direction horizontal to the conductor axis, 3.5 mm pitch, threaded flange on the left, open on one side, color: black, Two-In-One header, plug-in direction horizontal to the conductor axis, 3.5 mm pitch, threaded flange on the right, open on one side, color: black, Two-In-One header, plug-in direction horizontal to the conductor axis, 3.81 mm pitch, threaded flange on the left, open on one side, color: black, Two-In-One header, plug-in direction horizontal to the conductor axis, 3.81 mm pitch, threaded flange on the right, open on one side, color: black, (3) Marker card, with 14 pcs. 10-section marker strips, white, self-adhesive, for 140 terminal blocks 50 50 50 SK 3,5/2,8 or SK 3,81/2,8 (see COMBICON catalog) Technical data Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm] Technical data in accordance with IEC/ DIN VDE Insulating material group – Surge voltage category / contamination class –/– Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG CSA: [V]/[A|/AWG a + 8 ,4 (a + 8 ,7 1 ) 9 ,2 3 ,5 (3 ,8 1 ) a 3 ,5 (3 ,8 1 ) a 4 ,3 6 ,9 (4 ,5 ) (7 ,1 ) MC 1,5/…-GFL-THT 1 1 ,1 7 ,2 5 4 ,3 (4 ,5 ) 6 ,9 (7 ,1 ) a 3 ,5 (3 ,8 1 ) 1 8 ,7 7 ,2 5 8 3 ,4 1 1 ,1 8 300 / 8 / – – 2 ,4 5 (2 ,6 ) (*) a + 8 ,4 (a + 8 ,7 1 ) 9 ,2 II / 2 250 2.5 8 1 8 ,7 IIIa III / 2 160 2.5 8/– 8/– PA V0 III / 3 160 2.5 3 ,4 a 3 ,5 (3 ,8 1 ) (*) 6 ,9 (7 ,1 ) see description 3.5 / 3.81 *) ≤ 8-pos. = 1.3 / > 8-pos. = 1.4 0.8 x 0.8 8 MC 1,5/…-GFR-THT Phoenix Contact page 3 of 5 MCV 1,5/…-GL(R)…THT 3.5 or 3.81 mm Pitch Note: Through Hole Reflow headers for automated mounting processes can be packaged as "Tape On Reel" if requested. No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 17.5 21 MCV 1,5/6-GL-3,5 THT MCV 1,5/7-GL-3,5 THT 19 61 77 9 19 61 78 2 50 8 9 10 24.5 28 31.5 MCV 1,5/8-GL-3,5 THT MCV 1,5/9-GL-3,5 THT MCV 1,5/10-GL-3,5 THT 19 61 79 5 19 61 80 5 19 61 81 8 6 7 17.5 21 MCV 1,5/6-GR-3,5 THT MCV 1,5/7-GR-3,5 THT 19 61 84 7 19 61 85 0 8 9 10 24.5 28 31.5 MCV 1,5/8-GR-3,5 THT MCV 1,5/9-GR-3,5 THT MCV 1,5/10-GR-3,5 THT 19 61 86 3 19 61 87 6 19 61 88 9 6 7 19.05 22.86 MCV 1,5/6-GL-3,81 THT MCV 1,5/7-GL-3,81 THT 19 61 49 4 19 61 50 4 8 9 10 26.67 30.48 34.29 MCV 1,5/8-GL-3,81 THT MCV 1,5/9-GL-3,81 THT MCV 1,5/10-GL-3,81 THT 19 61 51 7 19 61 52 0 19 61 53 3 6 7 19.05 22.86 MCV 1,5/6-GR-3,81 THT MCV 1,5/7-GR-3,81 THT 19 61 56 2 19 61 57 5 8 9 10 26.67 30.48 34.29 MCV 1,5/8-GR-3,81 THT MCV 1,5/9-GR-3,81 THT MCV 1,5/10-GR-3,81 THT 19 61 58 8 19 61 59 1 19 61 60 1 (1) Coding profile, is inserted into the groove on the header after reflow-soldering, made of red plastic CP-MSTB 17 34 63 4 100 (2) Coding profile, is inserted into the groove on the header before reflow-soldering, made of hightemperature resistant beige plastic CP-MSTB NAT HT 19 54 35 9 100 Description Two-In-One header, plug-in direction vertical to the conductor axis, 3.5 mm pitch, side panel on the left, open on one side, color: black, Two-In-One header, plug-in direction vertical to the conductor axis, 3.5 mm pitch, side panel on the right, open on one side, color: black, Two-In-One header, plug-in direction vertical to the conductor axis, 3.81 mm pitch, side panel on the left, open on one side, color: black, Two-In-One header, plug-in direction vertical to the conductor axis, 3.81 mm pitch, side panel on the right, open on one side, color: black, (3) Marker card, with 14 pcs. 10-section marker strips, white, self-adhesive, for 140 terminal blocks 50 50 50 SK 3,5/2,8 or SK 3,81/2,8 (see COMBICON catalog) Technical data Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm] Technical data in accordance with IEC/ DIN VDE Insulating material group – Surge voltage category / contamination class –/– Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG CSA: [V]/[A|/AWG II / 2 250 2.5 300 / 8 / – – 1 1 ,1 2 ,4 5 (2 ,6 ) a + 3 ,9 5 (a + 4 ,2 6 ) 3 7 ,2 5 MCV 1,5/…-GL-THT 2 ,4 5 (2 ,6 ) 3 9 ,2 7 ,2 5 3 ,4 3 3 ,4 9 ,2 3 2 ,4 5 (2 ,6 ) a 3 ,5 (3 ,8 1 ) (*) 1 8 ,7 1 8 ,7 a + 3 ,9 5 (a + 4 ,2 6 ) 3 ,5 (3 ,8 1 ) a IIIa III / 2 160 2.5 8/– 8/– PA V0 III / 3 160 2.5 1 1 ,1 2 ,4 5 (2 ,6 ) (*) a 3 ,5 (3 ,8 1 ) see description 3.5 / 3.81 *) ≤ 8-pos. = 1.3 / > 8-pos. = 1.4 0.8 x 0.8 3 ,5 (3 ,8 1 ) a MCV 1,5/…-GR-THT Phoenix Contact page 4 of 5 MCV 1,5/…-GFL(R)…THT 3.5 or 3.81 mm Pitch Note: Through Hole Reflow headers for automated mounting processes can be packaged as "Tape On Reel" if requested. No. of pos. Dim. a [mm] Type Order No. Pcs./Pkt. 6 7 17.5 21 MCV 1,5/6-GFL-3,5 THT MCV 1,5/7-GFL-3,5 THT 19 63 04 9 19 63 05 2 50 8 9 10 24.5 28 31.5 MCV 1,5/8-GFL-3,5 THT MCV 1,5/9-GFL-3,5 THT MCV 1,5/10-GFL-3,5 THT 19 63 06 5 19 61 82 1 19 61 83 4 6 7 17.5 21 MCV 1,5/6-GFR-3,5 THT MCV 1,5/7-GFR-3,5 THT 19 63 07 8 19 63 08 1 8 9 10 24.5 28 31.5 MCV 1,5/8-GFR-3,5 THT MCV 1,5/9-GFR-3,5 THT MCV 1,5/10-GFR-3,5 THT 19 63 09 4 19 61 89 2 19 61 90 2 6 7 19.05 22.86 MCV 1,5/6-GFL-3,81 THT MCV 1,5/7-GFL-3,81 THT 19 62 92 7 19 62 93 0 8 9 10 26.67 30.48 34.29 MCV 1,5/8-GFL-3,81 THT MCV 1,5/9-GFL-3,81 THT MCV 1,5/10-GFL-3,81 THT 19 62 94 3 19 61 54 6 19 61 55 9 6 7 19.05 22.86 MCV 1,5/6-GFR-3,81 THT MCV 1,5/7-GFR-3,81 THT 19 62 95 6 19 62 96 9 8 9 10 26.67 30.48 34.29 MCV 1,5/8-GFR-3,81 THT MCV 1,5/9-GFR-3,81 THT MCV 1,5/10-GFR-3,81 THT 19 62 97 2 19 61 61 4 19 61 62 7 (1) Coding profile, is inserted into the groove on the header after reflow-soldering, made of red plastic CP-MSTB 17 34 63 4 100 (2) Coding profile, is inserted into the groove on the header before reflow-soldering, made of hightemperature resistant beige plastic CP-MSTB NAT HT 19 54 35 9 100 Description Two-In-One header, plug-in direction vertical to the conductor axis, 3.5 mm pitch, threaded flange on the left, open on one side, color: black, Two-In-One header, plug-in direction vertical to the conductor axis, 3.5 mm pitch, threaded flange on the right, open on one side, color: black, Two-In-One header, plug-in direction vertical to the conductor axis, 3.81 mm pitch, threaded flange on the left, open on one side, color: black, Two-In-One header, plug-in direction vertical to the conductor axis, 3.81 mm pitch, threaded flange on the right, open on one side, color: black, (3) Marker card, with 14 pcs. 10-section marker strips, white, self-adhesive, for 140 terminal blocks 50 50 50 SK 3,5/2,8 or SK 3,81/2,8 (see COMBICON catalog) IIIa III / 2 160 2.5 8/– 8/– PA V0 III / 3 160 2.5 300 / 8 / – – 1 1 ,1 a + 8 ,4 (a + 8 ,7 1 ) 6 ,9 (7 ,1 ) 3 ,4 3 7 ,2 5 3 ,4 3 7 ,2 5 MCV 1,5/…-GFL-THT 3 9 ,2 9 ,2 4 ,3 6 ,9 (4 ,5 ) (7 ,1 ) a 3 ,5 (3 ,8 1 ) (*) 1 8 ,7 1 8 ,7 a + 8 ,4 (a + 8 ,7 1 ) 3 3 ,5 (3 ,8 1 ) a II / 2 250 2.5 4 ,3 (4 ,5 ) 6 ,9 (7 ,1 ) 3 ,5 (3 ,8 1 ) a MCV 1,5/…-GFR-THT Phoenix Contact page 5 of 5  Phoenix Contact 15.11.02 TNR: 5127234-00 see description 3.5 / 3.81 *) ≤ 8-pos. = 1.3 / > 8-pos. = 1.4 0.8 x 0.8 1 1 ,1 6 ,9 (7 ,1 ) (*) a 3 ,5 (3 ,8 1 ) http://www.phoenixcontact.com Technical data Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm] Technical data in accordance with IEC/ DIN VDE Insulating material group – Surge voltage category / contamination class –/– Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor sizes UL/CUL:[V]/[A]/AWG CSA: [V]/[A|/AWG