1963531

MICRO COMBICON Headers for Through Hole Reflow Applications MC(V) 0,5/…G-2,5 THT 2.5 mm Pitch s. co m The consistent use of Through Hole Reflow plug connectors has also made it necessary to extend the COMBICON THR range to include the miniature pitch of 2.5 mm. The new THR MICRO COMBICON headers are of high-temperature resistant plastic and are ideally suited for the SMT reflow processes commonly encountered in industrial environments. po ne nt The possibility of being able to process the THR header together with SMD components in just one step using the PIN IN PASTE process, extends the scope of performance of the compact and space-saving MICRO plug connector. The familiar standard component family is now available with 2-12 positions as both vertical and horizontal version, as THR component. COMBICON Select The COMBICON search engine with CAD downloading on l in ec om The MC(V) 0,5-THT pin strips are equipped with 3.5 mm standard solder pins, and versions with short solder pins are also available on request. In combination with the through contacted drilled holes, the THR pin strips achieve the same high degree of mechanical stability as the headers soldered using the wave soldering process. The articles are available in loosely packaged form, but can also be supplied on request in a 44 mm wide tape. COMBICON Select – the printed circuit board connection software supports your workflow from the PCB and housing layout to the ordering process with: –Systematic and fast selection of products –Universal Internet aided engineering with extensive CAD downloading –Easy-to-use e-shopping functions. http://select.phoenixcontact.com Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com Local Contatct: www.phoenixcontact.com/salesnetwork MC 0,5/…-G-2,5 THT 2.5 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. No. of pos. Dim. a [mm] 2 3 Pcs./Pkt. 2.5 5 MC 0,5/2-G-2,5 THT MC 0,5/3-G-2,5 THT 19 63 42 1 19 63 43 4 50 4 5 6 7.5 10 12.5 MC 0,5/4-G-2,5 THT MC 0,5/5-G-2,5 THT MC 0,5/6-G-2,5 THT 19 63 44 7 19 63 45 0 19 63 46 3 7 8 9 15 17.5 20 MC 0,5/7-G-2,5 THT MC 0,5/8-G-2,5 THT MC 0,5/9-G-2,5 THT 10 11 12 22.5 25 27.5 MC 0,5/10-G-2,5 THT MC 0,5/11-G-2,5 THT MC 0,5/12-G-2,5 THT (1) Coding profile, is inserted into the groove on the header after reflow-soldering, made of red plastic Technical data 19 63 50 2 19 63 51 5 19 39 31 6 18 81 43 5 see description 2.5 *) ≤ 8-pos. = 1.2 / > 8-pos. = 1.3 0.8 x 0.8 po ne Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm] Technical data in accordance with IEC/ DIN VDE Insulating material group – Surge voltage category / contamination class –/– Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor UL/CUL: [V]/[A|/AWG sizes CSA: [V]/[A|/AWG 19 63 47 6 19 39 30 3 19 63 49 2 nt CP-MC 0,5 m Order No. co Headers, plug-in direction parallel to the conductor axis, 2.5 mm pitch, color: black, Type s. Description IIIa III / 2 160 2.5 4/– 4/– PA V0 om III / 3 32 1.5 II / 2 160 2.5 on l in ec applied for – 2 ,2 a 2 ,5 23,5 a+4,4 1,2 3,5 8,1 11,75 8 ,9 (*) 10,1 2,2 2,5 a Phoenix Contact page 2 of 5 100 MCV 0,5/…-G-2,5 THT 2.5 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. No. of pos. Dim. a [mm] 2 3 Pcs./Pkt. 2.5 5 MCV 0,5/2-G-2,5 THT MCV 0,5/3-G-2,5 THT 19 63 53 1 19 63 54 4 50 4 5 6 7.5 10 12.5 MCV 0,5/4-G-2,5 THT MCV 0,5/5-G-2,5 THT MCV 0,5/6-G-2,5 THT 19 63 55 7 19 63 56 0 19 63 57 3 7 8 9 15 17.5 20 MCV 0,5/7-G-2,5 THT MCV 0,5/8-G-2,5 THT MCV 0,5/9-G-2,5 THT 10 11 12 22.5 25 27.5 MCV 0,5/10-G-2,5 THT MCV 0,5/11-G-2,5 THT MCV 0,5/12-G-2,5 THT CP-MC 0,5 Technical data 19 63 61 2 19 63 62 5 19 63 63 8 18 81 43 5 see description 2.5 *) ≤ 8-pos. = 1.2 / > 8-pos. = 1.3 0.8 x 0.8 IIIa III / 2 160 2.5 4/– 4/– PA V0 III / 3 32 1.5 om po ne Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm] Technical data in accordance with IEC/ DIN VDE Insulating material group – Surge voltage category / contamination class –/– Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor UL/CUL: [V]/[A|/AWG sizes CSA: [V]/[A|/AWG 19 63 58 6 19 63 59 9 19 63 60 9 co (1) Coding profile, is inserted into the groove on the header after reflow-soldering, made of red plastic m Order No. s. Headers, plug-in direction vertical to the conductor axis, 2.5 mm pitch, color: black, Type nt Description II / 2 160 2.5 on l in ec applied for – 1 1 ,7 5 2 ,5 a + 4 ,4 2 3 ,5 a 1 0 ,1 (*) 3 ,9 2 ,2 3 ,5 3 ,9 8 ,1 Phoenix Contact page 3 of 5 2 ,2 2 ,5 a 100 MC 0,5/…-G-2,5 THT R44 2.5 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. No. of pos. Dim. a [mm] 2 3 Pcs./Pkt. 2.5 5 MC 0,5/2-G-2,5 THT R44 MC 0,5/3-G-2,5 THT R44 19 63 64 1 19 63 65 4 330 4 5 6 7.5 10 12.5 MC 0,5/4-G-2,5 THT R44 MC 0,5/5-G-2,5 THT R44 MC 0,5/6-G-2,5 THT R44 19 63 66 7 19 63 67 0 19 63 68 3 7 8 9 15 17.5 20 MC 0,5/7-G-2,5 THT R44 MC 0,5/8-G-2,5 THT R44 MC 0,5/9-G-2,5 THT R44 10 11 12 22.5 25 27.5 MC 0,5/10-G-2,5 THT R44 MC 0,5/11-G-2,5 THT R44 MC 0,5/12-G-2,5 THT R44 co (1) Coding profile, is inserted into the groove on the header after reflow-soldering, made of red plastic CP-MC 0,5 Technical data po om III / 3 32 1.5 in ec 19 63 72 2 19 63 73 5 19 63 74 8 18 81 43 5 IIIa III / 2 160 2.5 4/– 4/– PA V0 II / 2 160 2.5 applied for – MC 0,5/…-G-2,5 THT R44, Tape width 44 mm, odd nos. of positions, feeder direction 4 4 4 4 on l 19 63 69 6 19 63 70 6 19 63 71 9 see description 2.5 ≤ 8-pos. = 1.2 / > 8-pos. = 1.3 0.8 x 0.8 ne Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm] Technical data in accordance with IEC/ DIN VDE Insulating material group – Surge voltage category / contamination class –/– Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor UL/CUL: [V]/[A|/AWG sizes CSA: [V]/[A|/AWG MC 0,5/…-G-2,5 THT R44, Tape width 44 mm, even nos. of positions, feeder direction m Order No. s. Headers packed in tapes, plug-in direction horizontal to the conductor axis, 2.5 mm pitch, color: black, Type nt Description 1 6 1 2 ,7 1 2 ,7 1 6 Phoenix Contact page 4 of 5 100 MCV 0,5/…-G-2,5 THT R44 2.5 mm Pitch Note: COMBICON plug connectors may only be actuated in the no-load condition. If smaller loads need to be switched for operational reasons, experimental values are available on request. 2 3 Pcs./Pkt. 2.5 5 MCV 0,5/2-G-2,5 THT R44 MCV 0,5/3-G-2,5 THT R44 19 63 75 1 19 63 76 4 330 4 5 6 7.5 10 12.5 MCV 0,5/4-G-2,5 THT R44 MCV 0,5/5-G-2,5 THT R44 MCV 0,5/6-G-2,5 THT R44 19 63 77 7 19 63 78 0 19 63 79 3 7 8 9 15 17.5 20 MCV 0,5/7-G-2,5 THT R44 MCV 0,5/8-G-2,5 THT R44 MCV 0,5/9-G-2,5 THT R44 10 11 12 22.5 25 27.5 MCV 0,5/10-G-2,5 THT R44 MCV 0,5/11-G-2,5 THT R44 MCV 0,5/12-G-2,5 THT R44 co m Order No. (1) Coding profile, is inserted into the groove on the header after reflow-soldering, made of red plastic CP-MC 0,5 Technical data po ne Dimensions Pitch [mm] Hole diameter [mm] Pin dimensions [mm] Technical data in accordance with IEC/ DIN VDE Insulating material group – Surge voltage category / contamination class –/– Rated voltage [V] Rated surge voltage [kV] Nominal current / cross section [A]/[mm2] Maximum load current / cross section [A]/[mm2] Insulating material Inflammability class in acc. with UL 94 Approval data (UL/CUL and CSA) Nominal voltage / current / conductor UL/CUL: [V]/[A|/AWG sizes CSA: [V]/[A|/AWG s. Headers packed in tapes, plug-in direction vertical to the conductor axis, 2.5 mm pitch, color: black, Type 19 63 84 5 19 63 85 8 19 63 86 1 18 81 43 5 100 see description 2.5 ≤ 8-pos. = 1.2 / > 8-pos. = 1.3 0.8 x 0.8 IIIa III / 2 160 2.5 4/– 4/– PA V0 om III / 3 32 1.5 in ec II / 2 160 2.5 applied for – 4 4 MCV 0,5/…-G-2,5 THT R44, Tape width 44 mm, even and odd nos. of positions, feeder direction 1 6 1 5 ,8 on l 19 63 80 3 19 63 81 6 19 63 82 9 Phoenix Contact page 5 of 5 http://www.phoenixcontact.com Dim. a [mm]  Phoenix Contact 15.03.03 TNR:5127250-02 No. of pos. nt Description