1970100

https://www.phoenixcontact.com/us/products/1970100 Printed-circuit board connector - MSTBT 2,5 HC/ 2-STF-5,08 - 1970100 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug component, Nominal current: 16 A, Rated voltage (III/2): 320 V, Number of positions: 2, Pitch: 5.08 mm, Connection method: Screw connection with tension sleeve, Color: green, Contact surface: Tin, The T-shape of the MSTBT plug distributes the height uniformly over the upper and lower sides of the printed circuit board Why buy this product  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Integrated double steel spring provides additional safety in the event of temperature and power fluctuations Key Commercial Data Packing unit 1 STK Minimum order quantity 50 STK Custom tariff number 85366990 Country of origin Germany Technical data Environmental Product Compliance China RoHS Hazardous substances above threshold values; Environmentally Friendly Use Period = 50; For details go to tab “Downloads”, Category “Manufacturer's declaration” Dimensions Pitch 5.08 mm Dimension a 5.08 mm General Range of articles MSTBT 2,5 HC/..-ST Type of contact Female connector Number of positions 2 Connection method Screw connection with tension sleeve Insulating material group I 08/29/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/1970100 Printed-circuit board connector - MSTBT 2,5 HC/ 2-STF-5,08 - 1970100 Technical data General Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/3) 250 V Rated voltage (III/2) 320 V Rated voltage (II/2) 630 V Connection in acc. with standard EN-VDE Nominal current IN 16 A Nominal cross section 2.5 mm² Maximum load current 16 A Insulating material PA Flammability rating according to UL 94 V0 Internal cylindrical gage A3 Stripping length 7 mm Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 08/29/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/1970100 Printed-circuit board connector - MSTBT 2,5 HC/ 2-STF-5,08 - 1970100 Technical data Connection data 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, max. Minimum AWG according to UL/CUL 30 Maximum AWG according to UL/CUL 12 Standards and Regulations Connection in acc. with standard EN-VDE CUL Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27260701 eCl@ss 5.1 27141190 eCl@ss 6.0 27260704 eCl@ss 7.0 27440402 eCl@ss 8.0 27440309 eCl@ss 9.0 27440309 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002638 ETIM 5.0 EC002638 UNSPSC UNSPSC 6.01 30211810 UNSPSC 7.0901 39121409 UNSPSC 11 39121409 UNSPSC 12.01 39121409 UNSPSC 13.2 39121409 Approvals Approvals 08/29/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/1970100 Printed-circuit board connector - MSTBT 2,5 HC/ 2-STF-5,08 - 1970100 Approvals Approvals VDE Gutachten mit Fertigungsüberwachung / IECEE CB Scheme / EAC / cULus Recognized / EAC Ex Approvals Approval details VDE Gutachten mit Fertigungsüberwachung   http://www.vde.de 40004701     mm²/AWG/kcmil 0.2-2.5 Nominal current IN 16 A Nominal voltage UN 250 V IECEE CB Scheme   http://www.iecee.org/ DE1-56062-B1B2     mm²/AWG/kcmil 0.2-2.5 Nominal current IN 16 A Nominal voltage UN 250 V EAC   EAC-Zulassung cULus Recognized  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-19931011   B D mm²/AWG/kcmil 30-12 30-12 Nominal current IN 16 A 10 A Nominal voltage UN 300 V 300 V EAC   B.01742 Accessories Accessories Coding element 08/29/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/1970100 Printed-circuit board connector - MSTBT 2,5 HC/ 2-STF-5,08 - 1970100 Accessories Coding profile - CP-MSTB - 1734634 Coding profile, is inserted into the slot on the plug or inverted header, red insulating material     Labeled terminal marker Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting type: Adhesive, for terminal block width: 5 mm, Lettering field: 5 x 3.8 mm     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Marker card - SK U/3,8 WH:UNBEDRUCKT - 0803906 Marker card, Sheet, white, unlabeled, can be labeled with: Plotter, Office printing systems, Mounting type: Adhesive, Lettering field: 186 x 3.8 mm     08/29/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/1970100 Printed-circuit board connector - MSTBT 2,5 HC/ 2-STF-5,08 - 1970100 Accessories Marker card - SK 5/3,8:UNBEDRUCKT - 0805409 Marker card, Card, white, unlabeled, can be labeled with: Marker pen, Mounting type: Adhesive, for terminal block width: 5 mm, Lettering field: 5 x 3.8 mm     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/29/2016   Page 6 / 6