POWER COMBICON plugs with a 7.62 mm pitch
PC 5 plugs
The new PC 5 plug connection system is the logical
further development of the classic POWER
COMBICON PC 4. With a pitch of 7.62 mm all PC 5
plugs provide a nominal voltage of 600 V to UL. The
maximum permissible current is 41 A. An integrated
double steel spring ensures additional contact reliability,
especially in the event of extreme power or temperature
fluctuations.
PC 5 is designed for 2 to 12 positions and the screw
connection of stranded conductors up to 6 mm2 is
established in accordance with the proven cage
principle. A screw flange for securing the connection of
the plug to the header is also included in the PC 5
range.
Note:
PC 5 plugs are compatible with the current PC 4
headers.
COMBICON Select
The COMBICON search engine with CAD downloading
COMBICON Select – the printed circuit board connection software
supports your workflow from the PCB and housing layout to the
ordering process with:
–Systematic and fast selection of products
–Universal Internet aided engineering with extensive
CAD downloading
–Easy-to-use e-shopping functions.
select.phoenixcontact.com/combicon
Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany
Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com
Local Contact: www.phoenixcontact.com/salesnetwork
POWER COMBICON plugs
PC 5/...-ST-7,62
7.62 mm Pitch
No. of pos.
Dim.
a
[mm]
Type
Order No.
Pcs./Pkt.
2
3
7.62
15.24
PC 5/2-ST-7,62
PC 5/3-ST-7,62
19 75 58 7
19 75 59 0
50
4
5
6
22.86
30.48
38.10
PC 5/4-ST-7,62
PC 5/5-ST-7,62
PC 5/6-ST-7,62
19 75 60 0
19 75 61 3
19 75 62 6
7
8
9
45.72
53.34
60.96
PC 5/7-ST-7,62
PC 5/8-ST-7,62
PC 5/9-ST-7,62
19 75 63 9
19 75 64 2
19 75 65 5
10
11
12
68.58
76.20
83.82
PC 5/10-ST-7,62
PC 5/11-ST-7,62
PC 5/12-ST-7,62
19 75 66 8
19 75 67 1
19 75 68 4
(1) Coding profile, is inserted into
the slot on the plug and header,
red insulating material
CP-HCC 4
16 00 02 7
100
(2) Screwdriver
SZK PZ 1
12 06 45 0
10
(3) Marker card, with 12 pcs.,
10-section marker strips, white
self-adhesive, for 120 terminal blocks
SK 7,62/3,8
(see COMBICON catalog)
Description
POWER COMBICON plugs,
7.62 mm pitch,
color: green
Technical data
Dimensions
Pitch
[mm]
Hole diameter
[mm]
Pin dimensions
[mm]x[mm]
Technical data in acc. with IEC/ DIN VDE
Insulating material group
–
Surge voltage category / contamination class
–/–
Rated voltage
[V]
Rated surge voltage
[kV]
Nominal current / cross section
[A]/[mm2]
Maximum load current / cross section
[A]/[mm2]
Connection capacity
Solid / stranded / conductor sizes
[mm2]/[mm2]/AWG
Stranded with ferrule without / with plastic sleeve
[mm2]
Multiple connection (2 conductors with same cross section)
Solid / stranded
[mm2]
Stranded with ferrule without plastic sleeve
[mm2]
Stranded with TWIN ferrule with plastic sleeve
[mm2]
Stripping length
[mm]
Internal cylindrical gauge (IEC 60 947-1)
–
Thread
–
Torque
[Nm]
Insulating material
Inflammability class in acc. with UL 94
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes
UL/CUL: [V]/[A]/AWG
CSA: [V]/[A]/AWG
see description
7.62
––
––
I
III / 2
1000
8
411) / 10
411) / 10
III / 3
800
8
II / 2
1000
6
0.2 - 10 / 0.2 - 6 / 24 - 8
0.25 - 6 / 0.25 - 4
10
A4
M3
PA
V0
1
––
––
) Observe derating curve
a + 7 ,6 2
2 2 ,9
3 6 ,5
1 4 ,7
7 ,6 2
a
PHOENIX CONTACT page 2 of 6
POWER COMBICON plugs
PC 5/...-STF-7,62
7.62 mm Pitch
No. of pos.
Dim.
a
[mm]
Type
Order No.
Pcs./Pkt.
2
3
7.62
15.24
PC 5/2-STF-7,62
PC 5/3-STF-7,62
19 75 69 7
19 75 70 7
50
4
5
6
22.86
30.48
38.10
PC 5/4-STF-7,62
PC 5/5-STF-7,62
PC 5/6-STF-7,62
19 75 71 0
19 75 73 2
19 75 73 6
7
8
9
45.72
53.34
60.96
PC 5/7-STF-7,62
PC 5/8-STF-7,62
PC 5/9-STF-7,62
19 75 74 9
19 75 75 2
19 75 76 5
10
11
12
68.58
76.20
83.82
PC 5/10-STF-7,62
PC 5/11-STF-7,62
PC 5/12-STF-7,62
19 75 77 8
19 75 78 1
19 75 79 4
(1) Coding profile, is inserted into
the slot on the plug and header,
red insulating material
CP-HCC 4
16 00 02 7
100
(2) Screwdriver
SZK PZ 1
12 06 45 0
10
(3) Marker card, with 12 pcs.,
10-section marker strips, white
self-adhesive, for 120 terminal blocks
SK 7,62/3,8
(see COMBICON catalog)
Description
POWER COMBICON plugs,
7.62 mm pitch, color: green,
with screw flange
Technical data
Dimensions
Pitch
[mm]
Hole diameter
[mm]
Pin dimensions
[mm]x[mm]
Technical data in acc. with IEC/ DIN VDE
Insulating material group
–
Surge voltage category / contamination class
–/–
Rated voltage
[V]
Rated surge voltage
[kV]
Nominal current / cross section
[A]/[mm2]
Maximum load current / cross section
[A]/[mm2]
Connection capacity
Solid / stranded / conductor sizes
[mm2]/[mm2]/AWG
Stranded with ferrule without / with plastic sleeve
[mm2]
Multiple connection (2 conductors with same cross section)
Solid / stranded
[mm2]
Stranded with ferrule without plastic sleeve
[mm2]
Stranded with TWIN ferrule with plastic sleeve
[mm2]
Stripping length
[mm]
Internal cylindrical gauge (IEC 60 947-1)
–
Thread
–
Torque
[Nm]
Insulating material
Inflammability class in acc. with UL 94
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes
UL/CUL: [V]/[A]/AWG
CSA: [V]/[A]/AWG
see description
7.62
––
––
I
III / 2
1000
8
411) / 10
411) / 10
III / 3
800
8
II / 2
1000
6
0.2 -10 / 0.2 - 6/ 24 - 8
0.25 - 6 / 0.25 - 4
10
A4
M3
PA
V0
1
––
––
) Observe derating curve
7 ,6 1
a + 7 ,6 2
2 2 ,9
3 6 ,5
1 4 ,7
7 ,6 2
7 ,6 2
a
PHOENIX CONTACT page 3 of 6
POWER COMBICON plugs with screw flange and
shield, 7.62 mm pitch
PC 5/…-STF-SH-7,62
The PC plug with shield provides a professional
connection of the braided shield to prevent electrical
interference. The largest possible contact of the
shielded cable is decisive for compliance with EMC
requirements and for high-quality shielding. To ensure
optimum connection of the conductor with the shield,
conventional metal cable clamps should be used (see
photo). The shielded cable may also be connected to
the engaged shield with a plastic cable tie. The screw
integrated in the plug flange guarantees a perfect
connection between the shroud and the metal front.
POWER COMBICON PCB-SHIELD
If the housing wall or front panel is not conductive, it is
possible to route the shielding function on to POWER
COMBICON PCB-SHIELD directly on the PCB via the
flange screw (see photo). The 6.3/2.8 x 0.8 mm slip-on
connection can then also be used to reach the next
grounding point along the shortest possible route.
PHOENIX CONTACT page 4 of 6
POWER COMBICON plugs
PC 5/...-STF-SH-7,62
7.62 mm Pitch
No. of pos.
Dim.
a
[mm]
Type
Order No.
Pcs./Pkt.
4
22.86
PC 5/4-STF-SH-7,62
19 75 80 4
25
(1) Coding profile, is inserted into
the slot on the plug and header,
red insulating material
CP-HCC 4
16 00 02 7
100
(2) Screwdriver
SZK PZ 1
12 06 45 0
10
(3) Marker card, with 12 pcs.,
10-section marker strips, white
self-adhesive, for 120 terminal blocks
SK 7,62/3,8
(see COMBICON catalog)
Description
POWER COMBICON plugs,
7.62 mm pitch, color: green,
with screw flange and shield
Technical data
Dimensions
Pitch
[mm]
Hole diameter
[mm]
Pin dimensions
[mm]x[mm]
Technical data in acc. with IEC/ DIN VDE
Insulating material group
–
Surge voltage category / contamination class
–/–
Rated voltage
[V]
Rated surge voltage
[kV]
Nominal current / cross section
[A]/[mm2]
Maximum load current / cross section
[A]/[mm2]
Connection capacity
Solid / stranded / conductor sizes
[mm2]/[mm2]/AWG
Stranded with ferrule without / with plastic sleeve
[mm2]
Multiple connection (2 conductors with same cross section)
Solid / stranded
[mm2]
Stranded with ferrule without plastic sleeve
[mm2]
Stranded with TWIN ferrule with plastic sleeve
[mm2]
Stripping length
[mm]
Internal cylindrical gauge (IEC 60 947-1)
–
Thread
–
Torque
[Nm]
Insulating material
Inflammability class in acc. with UL 94
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes
UL/CUL: [V]/[A]/AWG
CSA: [V]/[A]/AWG
see description
7.62
––
––
III / 3
800
8
I
III / 2
1000
8
411) / 10
411) / 10
II / 2
1000
6
0.2 - 10 / 0.2 - 6 / 24 - 8
0.25 - 6 / 0.25 - 4
10
A4
M3
PA
V0
––
––
1
) Observe derating curve
7 7 ,7
3 6 ,5
9 ,2 6
1 ,5
2 2 ,9
1 4 ,7
PHOENIX CONTACT page 5 of 6
4 8 ,9 6
7 ,6 2
2 2 ,8 6
1 4 ,5
6
1 0
1 2 ,5
2
POWER COMBICON headers with
POWER COMBICON PCB-SHIELD
PC 4/...-G-7,62
7.62 mm Pitch
Dim.
a
[mm]
No. of pos.
Type
Order No.
Pcs./Pkt.
PC 4/2-G-7,62
PC 4/4-G-7,62
18 04 79 7
18 04 81 0
50
50
(1) Coding profile, is inserted into
the slot on the plug and header,
red insulating material
CP-HCC 4
16 00 02 7
100
(2) Shroud, connects the shield from the flange
screw of the plug to the PCB with a 6.3/2.8 x 0.8 mm
slip-on connection
POWER COMBICON PCB-SHIELD
19 68 38 7
50
Description
POWER COMBICON headers,
7.62 mm pitch, color: green
2
4
7.62
22.86
(3) Marker card, with 12 pcs.,
10-section marker strips, white
self-adhesive, for 120 terminal blocks
SK 7,62/3,8
(see COMBICON catalog)
Technical data
see description
7.62
1.3
1 x 0.8
[mm]
[mm]
[mm]x[mm]
–
–/–
[V]
[kV]
[A]/[mm2]
[A]/[mm2]
UL/CUL: [V]/[A]/AWG
CSA: [V]/[A]/AWG
IIIa
III / 2
630
6
201) / ––
201) / ––
PBT
V0
III / 3
400
6
II / 2
630
6
––
––
1) With PC 4/... plug, 41 A with PC 5/... plug
2 2 ,8 6
7 ,6 2
3 ,8
7 ,6 2
4 5
5
1 8
7 ,6 2
5 ,0 8
1 0 ,1 6
a + 7 ,6
2
5 ,5 4
2 9
7 ,6 2
2
7 ,6 2
3 ,8
a
1 ,7
1 ,3
PHOENIX CONTACT page 6 of 6
TNR: 102397-01-en/30.07.06 © PHOENIX CONTACT2006
Dimensions
Pitch
Hole diameter
Pin dimensions
Technical data in acc. with IEC/ DIN VDE
Insulating material group
Surge voltage category / contamination class
Rated voltage
Rated surge voltage
Nominal current / cross section
Maximum load current / cross section
Insulating material
Inflammability class in acc. with UL 94
Approval data (UL/CUL and CSA)
Nominal voltage / current / conductor sizes
