1980598

https://www.phoenixcontact.com/us/products/1980598 Feed-through header - ST 4-PCB/ 2-G-6,2 - 1980598 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) ST-COMBI receptacle, plug-in direction horizontal to the PCB, pitch: 6.2 mm, no. of positions: 2 The figure shows the 5-position version of the product Your advantages  The pitch width of this base strip is matched to that of the COMBI plug  Universal plug-in solutions from the DIN rail through to the device can be implemented with the same plug  Well-known mounting principle allows worldwide use  Easy PCB replacement thanks to plug-in modules Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918972264 Custom tariff number 85366930 Country of origin Poland Technical data Item properties Brief article description Feed-through header Type of contact Male connector Range of articles ST 4-PCB/..-G Number of positions 2 04/15/2021   Page 1 / 6 https://www.phoenixcontact.com/us/products/1980598 Feed-through header - ST 4-PCB/ 2-G-6,2 - 1980598 Technical data Item properties Mounting type Wave soldering Pin layout Zigzag pinning W Locking without Number of levels 1 Pin connector pattern alignment Standard Electrical parameters Nominal current 26 A Nom. voltage 1000 V Rated voltage (III/3) 800 V Rated voltage (III/2) 1000 V Rated voltage (II/2) 1000 V Rated surge voltage (III/3) 8 kV Rated surge voltage (III/2) 8 kV Rated surge voltage (II/2) 6 kV Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics Tin-plated Metal surface contact area (top layer) Tin (4 - 8 µm Sn) Metal surface soldering area (top layer) Tin (4 - 8 µm Sn) Material data - housing Housing color gray (7042) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Flange specifications Type of locking without Dimensions for the product Length [ l ] 25.1 mm Width [ w ] 14.45 mm 04/15/2021   Page 2 / 6 https://www.phoenixcontact.com/us/products/1980598 Feed-through header - ST 4-PCB/ 2-G-6,2 - 1980598 Technical data Dimensions for the product Height [ h ] 29.45 mm Pitch 6.2 mm Height (without solder pin) 25.95 mm Solder pin [P] 3.5 mm Dimensions for PCB design Hole diameter 2 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. General product information Type of note Note on application Note In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. Ambient conditions Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 100 °C (dependent on the derating curve) Air clearances and creepage distances Clearances and creepage distances IEC 60664-1:2007-04 Specification IEC 60664-1:2007-04 Minimum clearance - inhomogeneous field (III/3) 8 mm Minimum clearance - inhomogeneous field (III/2) 8 mm Minimum clearance - inhomogeneous field (II/2) 5.5 mm Minimum creepage distance value (III/3) 10 mm Minimum creepage distance value (III/2) 8 mm Minimum creepage distance value (II/2) 5.5 mm Mechanical tests (A) Test specification IEC 61984 Insertion strength per pos. approx. 8N Withdraw strength per pos. approx. 6N Polarization when inserted requirement >20 N Test passed Contact holder in insert requirements >20 N Test passed Durability tests (B) 04/15/2021   Page 3 / 6 https://www.phoenixcontact.com/us/products/1980598 Feed-through header - ST 4-PCB/ 2-G-6,2 - 1980598 Technical data Durability tests (B) Specification IEC 60512-5:1992-08 Contact resistance R1 0.7 mΩ Insertion/withdrawal cycles 50 Contact resistance R2 1 mΩ Impulse withstand voltage at sea level 9.8 kV Thermal tests (C) Specification IEC 60512-5-1:2002-02 Number of positions 12 Upper limiting temperature requirements