1987106

https://www.phoenixcontact.com/us/products/1987106 PCB terminal block - MKDSN 2,5/ 3-5,08 SZS-SCREW - 1987106 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, nominal current: 24 A, rated voltage (III/2): 400 V, nominal cross section: 2.5 mm², pitch: 5.08 mm, number of positions: 3, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 3.5 mm The figure shows a 2-pos. version of the product Your advantages  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Extremely small design for the respective conductor cross section  Integrated protective guide prevents incorrect insertion of the conductor underneath the tension sleeve  The latching on the side enables various numbers of positions to be combined Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918924843 Weight per Piece (excluding packing) 4.800 g Custom tariff number 85369010 Country of origin Germany Technical data Item properties Brief article description PCB terminal block Range of articles MKDSN 2,5 06/28/2020   Page 1 / 8 https://www.phoenixcontact.com/us/products/1987106 PCB terminal block - MKDSN 2,5/ 3-5,08 SZS-SCREW - 1987106 Technical data Item properties Pitch 5.08 mm Number of positions 3 Connection method Screw connection with tension sleeve Drive form screw head Slotted (L) Screw thread M3 Mounting type Wave soldering Pin layout Linear pinning Number of levels 1 Number of connections 3 Number of potentials 3 Electrical parameters Nominal current 24 A Nom. voltage 400 V Rated voltage 250 V Rated voltage (III/2) 400 V Rated voltage (II/2) 630 V Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Connection capacity Connection method Screw connection with tension sleeve pluggable Yes Conductor cross section solid 0.2 mm² ... 2.5 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG / kcmil 24 ... 14 Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 2.5 mm² 2 conductors with same cross section, solid 0.2 mm² ... 0.75 mm² 2 conductors with same cross section, flexible 0.2 mm² ... 0.75 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm² ... 0.75 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 1.5 mm² Stripping length 6.5 mm Torque 0.5 Nm ... 0.6 Nm Material data - contact 06/28/2020   Page 2 / 8 https://www.phoenixcontact.com/us/products/1987106 PCB terminal block - MKDSN 2,5/ 3-5,08 SZS-SCREW - 1987106 Technical data Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics Tin-plated Metal surface terminal point (top layer) Tin (4 - 8 µm Sn) Metal surface soldering area (top layer) Tin (4 - 8 µm Sn) Material data - housing Housing color green (6021) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Dimensions for the product Length [ l ] 9.5 mm Width [ w ] 15.24 mm Height [ h ] 18.5 mm Pitch 5.08 mm Height (without solder pin) 15 mm Solder pin [P] 3.5 mm Pin dimensions 0.8 x 0.9 mm Dimensions for PCB design Hole diameter 1.3 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. General product information Type of note Note on application Note For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). 06/28/2020   Page 3 / 8 https://www.phoenixcontact.com/us/products/1987106 PCB terminal block - MKDSN 2,5/ 3-5,08 SZS-SCREW - 1987106 Technical data Ambient conditions Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) Termination and connection method Test for conductor damage and slackening IEC 60999-1:1999-11 Test passed Pull-out test Pull-out test IEC 60999-1:1999-11 Test passed Conductor cross section / conductor type / tensile force 0.2 mm² / flexible / > 10 N 0.2 mm² / solid / > 10 N 2.5 mm² / flexible / > 50 N 2.5 mm² / solid / > 50 N Mechanical tests according to standard Test specification IEC 60947-7-4 Electrical tests Rated current 24 A Conductor cross section 2.5 mm² Rated voltage (III/2) 400 V Rated surge voltage (III/2) 4 kV Air clearances and creepage distances Clearances and creepage distances IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 Specification IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 Minimum clearance - inhomogeneous field (III/3) 3 mm Minimum clearance - inhomogeneous field (III/2) 3 mm Minimum clearance - inhomogeneous field (II/2) 3 mm Minimum creepage distance value (III/3) 3.2 mm Minimum creepage distance value (III/2) 3 mm Minimum creepage distance value (II/2) 3.2 mm Temperature-rise test Result Test passed Specification IEC 60947-7-4:2013-08 Current carrying capacity / derating curves Specification IEC 60947-7-4 06/28/2020   Page 4 / 8 https://www.phoenixcontact.com/us/products/1987106 PCB terminal block - MKDSN 2,5/ 3-5,08 SZS-SCREW - 1987106 Technical data Vibration test Specification IEC 60068-2-6:2007-12 Result Test passed Frequency 10 - 150 - 10 Hz Sweep speed 1 octave/min Amplitude 0.35 mm (10 - 60.1 Hz) Acceleration 5 g (60.1 - 150 Hz) Test duration per axis 2.5 h Standards and Regulations Connection in acc. with standard EN-VDE CUL Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Diagram Type: MKDSN 2,5/... 06/28/2020   Page 5 / 8 https://www.phoenixcontact.com/us/products/1987106 PCB terminal block - MKDSN 2,5/ 3-5,08 SZS-SCREW - 1987106 Classifications eCl@ss eCl@ss 10.0.1 27440401 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27261100 eCl@ss 6.0 27261100 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 ETIM 6.0 EC002643 ETIM 7.0 EC002643 UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 UNSPSC 18.0 39121432 UNSPSC 19.0 39121432 UNSPSC 20.0 39121432 UNSPSC 21.0 39121432 Approvals Approvals Approvals IECEE CB Scheme / VDE Gutachten mit Fertigungsüberwachung / EAC / cULus Recognized / SEV Ex Approvals 06/28/2020   Page 6 / 8 https://www.phoenixcontact.com/us/products/1987106 PCB terminal block - MKDSN 2,5/ 3-5,08 SZS-SCREW - 1987106 Approvals Approval details IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 250 V Nominal current IN 24 A mm²/AWG/kcmil 0.2-2.5 VDE Gutachten mit Fertigungsüberwachung    DE1-58859  http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 250 V Nominal current IN 24 A mm²/AWG/kcmil 0.2-2.5  40018557 EAC      B.01687 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-19770427   B D Nominal voltage UN 300 V 150 V Nominal current IN 20 A 15 A mm²/AWG/kcmil 30-12 30-12 SEV     https://www.eurofins.ch/de/     Nominal voltage UN 250 V Nominal current IN 24 A mm²/AWG/kcmil 2.5  IK-4486-A1 06/28/2020   Page 7 / 8 https://www.phoenixcontact.com/us/products/1987106 Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 06/28/2020   Page 8 / 8