1987834

https://www.phoenixcontact.com/us/products/1987834 PCB terminal block - PT 2,5/13-5,0-V - 1987834 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, nominal current: 32 A, rated voltage (III/2): 400 V, nominal cross section: 2.5 mm², number of potentials: 13, Number of rows: 1, Number of positions per row: 13, product range: PT 2,5/..-V, pitch: 5 mm, connection method: Screw connection with wire protector, mounting: Wave soldering, conductor/PCB connection direction: 90 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 4.1 mm, type of packaging: packed in cardboard The figure shows a 10-position version of the product Your advantages  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  High terminal block capacity thanks to rectangular terminal block space  Allows connection of two conductors  The latching on the side enables various numbers of positions to be combined Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918973308 Weight per Piece (excluding packing) 15.860 g Custom tariff number 85369010 Country of origin Poland Technical data Item properties Brief article description PCB terminal block Range of articles PT 2,5/..-V 12/08/2021   Page 1 / 8 https://www.phoenixcontact.com/us/products/1987834 PCB terminal block - PT 2,5/13-5,0-V - 1987834 Technical data Item properties Pitch 5 mm Number of positions 13 Screw thread M3 Mounting type Wave soldering Pin layout Linear pinning Number of rows 1 Number of connections 13 Number of potentials 13 Electrical parameters Nominal current 32 A Nom. voltage 400 V Rated voltage (III/3) 250 V Rated voltage (III/2) 400 V Rated voltage (II/2) 630 V Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Connection capacity Connection method Screw connection with wire protector pluggable no Conductor cross section solid 0.5 mm² ... 4 mm² Conductor cross section flexible 0.5 mm² ... 4 mm² Conductor cross section AWG / kcmil 20 ... 10 Conductor cross section flexible, with ferrule without plastic sleeve 0.5 mm² ... 2.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 0.5 mm² ... 2.5 mm² 2 conductors with same cross section, solid 0.5 mm² ... 1.5 mm² 2 conductors with same cross section, flexible 0.5 mm² ... 1.5 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.5 mm² ... 0.75 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 1.5 mm² Stripping length 6.5 mm Torque 0.45 Nm ... 0.5 Nm Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy 12/08/2021   Page 2 / 8 https://www.phoenixcontact.com/us/products/1987834 PCB terminal block - PT 2,5/13-5,0-V - 1987834 Technical data Material data - contact Surface characteristics Tin-plated Metal surface terminal point (top layer) Tin (3 - 12 µm Sn) Metal surface terminal point (middle layer) Nickel (1.5 - 4 µm Ni) Metal surface soldering area (top layer) Tin (3 - 12 µm Sn) Metal surface soldering area (middle layer) Nickel (1.5 - 4 µm Ni) Material data - housing Housing color green (6021) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2-13 775 Temperature for the ball pressure test according to EN 60695-10-2 125 °C Dimensions for the product Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center Length [ l ] 13.5 mm Width [ w ] 65 mm Height [ h ] 13.1 mm Pitch 5 mm Height (without solder pin) 9 mm Solder pin [P] 4.1 mm Pin spacing 5 mm Pin dimensions ø 1 mm Dimensions for PCB design Hole diameter 1.3 mm Pin spacing 5 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. General product information Type of note Note on application Note For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or 12/08/2021   Page 3 / 8 https://www.phoenixcontact.com/us/products/1987834 PCB terminal block - PT 2,5/13-5,0-V - 1987834 Technical data General product information three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). Ambient conditions Ambient temperature (storage/transport) -40 °C ... 70 °C Relative humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 100 °C Ambient temperature (operation) -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) Electrical tests Rated current 32 A Conductor cross section 4 mm² Rated voltage (III/2) 400 V Rated surge voltage (III/2) 4 kV Air clearances and creepage distances Clearances and creepage distances IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 Specification IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 Minimum clearance - inhomogeneous field (III/3) 3 mm Minimum clearance - inhomogeneous field (III/2) 3 mm Minimum clearance - inhomogeneous field (II/2) 3 mm Minimum creepage distance value (III/3) 3.2 mm Minimum creepage distance value (III/2) 3 mm Minimum creepage distance value (II/2) 3.2 mm Standards and Regulations Connection in acc. with standard EN-VDE Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 12/08/2021   Page 4 / 8 https://www.phoenixcontact.com/us/products/1987834 PCB terminal block - PT 2,5/13-5,0-V - 1987834 Drilling diagram Diagram Current carrying capacity [A] a 5 4,5 2,5 1,3 48 40 2 32 24 16 1 = 2,5mm 2 2 = 4mm 0 0 20 8 1 2 40 60 80 100 Ambient temperature [°C] The figure shows the 5-pos. version Derating diagram for 5 pins;reduction factor=1 Dimensional drawing 13,5 4,1 9 a+5 6,28 2,5 5 a The figure shows the 5-pos. version Classifications eCl@ss eCl@ss 10.0.1 27440401 eCl@ss 11.0 27460101 eCl@ss 4.0 27260700 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27261100 eCl@ss 6.0 27261100 eCl@ss 7.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 6.0 EC002643 ETIM 7.0 EC002643 12/08/2021   Page 5 / 8 https://www.phoenixcontact.com/us/products/1987834 PCB terminal block - PT 2,5/13-5,0-V - 1987834 Classifications UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 34131203 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 UNSPSC 18.0 39121432 UNSPSC 19.0 39121432 UNSPSC 20.0 39121432 UNSPSC 21.0 39121432 Approvals Approvals Approvals VDE Gutachten mit Fertigungsüberwachung / CCA / IECEE CB Scheme / EAC / cULus Recognized Ex Approvals Approval details VDE Gutachten mit Fertigungsüberwachung    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 250 V Nominal current IN 32 A mm²/AWG/kcmil 0.5-4 CCA        Nominal voltage UN 250 V Nominal current IN 32 A mm²/AWG/kcmil 0.5-4  40029839  DE1 34001 12/08/2021   Page 6 / 8 https://www.phoenixcontact.com/us/products/1987834 PCB terminal block - PT 2,5/13-5,0-V - 1987834 Approvals IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 250 V Nominal current IN 32 A mm²/AWG/kcmil 0.5-4  DE1-63844 EAC      B.01687 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-20030211   B D Nominal voltage UN 300 V 300 V Nominal current IN 20 A 10 A mm²/AWG/kcmil 20-12 20-12 Accessories Accessories Labeled terminal marker Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 Marker card, Card, white, labeled, horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     12/08/2021   Page 7 / 8 https://www.phoenixcontact.com/us/products/1987834 PCB terminal block - PT 2,5/13-5,0-V - 1987834 Accessories Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com 12/08/2021   Page 8 / 8